* [linux-dvb] SkyStar rev 2.8A driver? @ 2008-02-14 15:02 Ali H.M. Hoseini 2008-02-14 16:28 ` CityK 0 siblings, 1 reply; 5+ messages in thread From: Ali H.M. Hoseini @ 2008-02-14 15:02 UTC (permalink / raw) To: linux-dvb [-- Attachment #1.1: Type: text/plain, Size: 481 bytes --] Hi, I searched linuxtv.org mailing list archive about SkyStar2 rev2.8A driver, or any suggestion, but I found nothing. The 2.6.22 kernel initialize B2C2 chip itself, but it could not identify the frontend for card. The chips used in this card for frontend are conexant cx24123 and cx24113 . I tried to load cx24123 module exists in the kernel, but later I found it is not defined for b2c2-flexcop module to use it, and hence it is not useful. Could anybody help me? j. Jikman [-- Attachment #1.2: Type: text/html, Size: 581 bytes --] [-- Attachment #2: Type: text/plain, Size: 150 bytes --] _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [linux-dvb] SkyStar rev 2.8A driver? 2008-02-14 15:02 [linux-dvb] SkyStar rev 2.8A driver? Ali H.M. Hoseini @ 2008-02-14 16:28 ` CityK 2008-02-16 6:26 ` Ali H.M. Hoseini 0 siblings, 1 reply; 5+ messages in thread From: CityK @ 2008-02-14 16:28 UTC (permalink / raw) To: Ali H.M. Hoseini; +Cc: linux-dvb Ali H.M. Hoseini wrote: > Hi, > > I searched linuxtv.org <http://linuxtv.org/> mailing list archive > about SkyStar2 rev2.8A driver, or any suggestion, but I found nothing. > > The 2.6.22 kernel initialize B2C2 chip itself, but it could not > identify the frontend for card. The chips used in this card for > frontend are conexant cx24123 and cx24113 . > I tried to load cx24123 module exists in the kernel, but later I found > it is not defined for b2c2-flexcop module to use it, and hence it is > not useful. > > Could anybody help me? See: http://marc.info/?l=linux-dvb&m=120042808124927&w=2 _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [linux-dvb] SkyStar rev 2.8A driver? 2008-02-14 16:28 ` CityK @ 2008-02-16 6:26 ` Ali H.M. Hoseini 2008-02-19 21:22 ` Patrick Boettcher 0 siblings, 1 reply; 5+ messages in thread From: Ali H.M. Hoseini @ 2008-02-16 6:26 UTC (permalink / raw) To: CityK; +Cc: linux-dvb [-- Attachment #1.1: Type: text/plain, Size: 1005 bytes --] On 2/14/08, CityK <CityK@rogers.com> wrote: > > Ali H.M. Hoseini wrote: > > Hi, > > > > I searched linuxtv.org <http://linuxtv.org/> mailing list archive > > about SkyStar2 rev2.8A driver, or any suggestion, but I found nothing. > > > > The 2.6.22 kernel initialize B2C2 chip itself, but it could not > > identify the frontend for card. The chips used in this card for > > frontend are conexant cx24123 and cx24113 . > > I tried to load cx24123 module exists in the kernel, but later I found > > it is not defined for b2c2-flexcop module to use it, and hence it is > > not useful. > > > > Could anybody help me? > > See: http://marc.info/?l=linux-dvb&m=120042808124927&w=2 > I took a look at that link, but it does not have any useful information, such as release time, or anything else. Anybody knows when support for this card release? I bought one of this cards and I have to use windows until I find linux support for it. Somebody helps me! I really need to use my SkyStar2 rev 2.8A under linux! [-- Attachment #1.2: Type: text/html, Size: 1593 bytes --] [-- Attachment #2: Type: text/plain, Size: 150 bytes --] _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [linux-dvb] SkyStar rev 2.8A driver? 2008-02-16 6:26 ` Ali H.M. Hoseini @ 2008-02-19 21:22 ` Patrick Boettcher 2008-02-20 13:59 ` Ali H.M. Hoseini 0 siblings, 1 reply; 5+ messages in thread From: Patrick Boettcher @ 2008-02-19 21:22 UTC (permalink / raw) To: Ali H.M. Hoseini; +Cc: linux-dvb Hi, an OpenSource driver is not in sight for that card. There are some NDA problems... I will see what I can do. Patrick. On Sat, 16 Feb 2008, Ali H.M. Hoseini wrote: > On 2/14/08, CityK <CityK@rogers.com> wrote: >> >> Ali H.M. Hoseini wrote: >>> Hi, >>> >>> I searched linuxtv.org <http://linuxtv.org/> mailing list archive >>> about SkyStar2 rev2.8A driver, or any suggestion, but I found nothing. >>> >>> The 2.6.22 kernel initialize B2C2 chip itself, but it could not >>> identify the frontend for card. The chips used in this card for >>> frontend are conexant cx24123 and cx24113 . >>> I tried to load cx24123 module exists in the kernel, but later I found >>> it is not defined for b2c2-flexcop module to use it, and hence it is >>> not useful. >>> >>> Could anybody help me? >> >> See: http://marc.info/?l=linux-dvb&m=120042808124927&w=2 >> > > > I took a look at that link, but it does not have any useful information, > such as release time, or anything else. > Anybody knows when support for this card release? I bought one of this cards > and I have to use windows until I find linux support for it. > > Somebody helps me! I really need to use my SkyStar2 rev 2.8A under linux! > _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [linux-dvb] SkyStar rev 2.8A driver? 2008-02-19 21:22 ` Patrick Boettcher @ 2008-02-20 13:59 ` Ali H.M. Hoseini 0 siblings, 0 replies; 5+ messages in thread From: Ali H.M. Hoseini @ 2008-02-20 13:59 UTC (permalink / raw) To: Patrick Boettcher, linux-dvb [-- Attachment #1.1: Type: text/plain, Size: 1692 bytes --] Hi, 1: Do you need any help or support? emailing, asking from TechniSat or anybody else? 2: Most of this card components are now supported under linux, such as frontend from Conexant, so why you have NDA problems? 3: You said OpenSource driver is not insight. Do you mean they plan to give a closed source dirver for linux? On Wed, Feb 20, 2008 at 12:52 AM, Patrick Boettcher < patrick.boettcher@desy.de> wrote: > Hi, > > an OpenSource driver is not in sight for that card. There are some NDA > problems... I will see what I can do. > > Patrick. > > On Sat, 16 Feb 2008, Ali H.M. Hoseini wrote: > > > On 2/14/08, CityK <CityK@rogers.com> wrote: > >> > >> Ali H.M. Hoseini wrote: > >>> Hi, > >>> > >>> I searched linuxtv.org <http://linuxtv.org/> mailing list archive > >>> about SkyStar2 rev2.8A driver, or any suggestion, but I found nothing. > >>> > >>> The 2.6.22 kernel initialize B2C2 chip itself, but it could not > >>> identify the frontend for card. The chips used in this card for > >>> frontend are conexant cx24123 and cx24113 . > >>> I tried to load cx24123 module exists in the kernel, but later I found > >>> it is not defined for b2c2-flexcop module to use it, and hence it is > >>> not useful. > >>> > >>> Could anybody help me? > >> > >> See: http://marc.info/?l=linux-dvb&m=120042808124927&w=2 > >> > > > > > > I took a look at that link, but it does not have any useful information, > > such as release time, or anything else. > > Anybody knows when support for this card release? I bought one of this > cards > > and I have to use windows until I find linux support for it. > > > > Somebody helps me! I really need to use my SkyStar2 rev 2.8A under > linux! > > > > [-- Attachment #1.2: Type: text/html, Size: 2533 bytes --] [-- Attachment #2: Type: text/plain, Size: 150 bytes --] _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2008-02-20 13:59 UTC | newest] Thread overview: 5+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2008-02-14 15:02 [linux-dvb] SkyStar rev 2.8A driver? Ali H.M. Hoseini 2008-02-14 16:28 ` CityK 2008-02-16 6:26 ` Ali H.M. Hoseini 2008-02-19 21:22 ` Patrick Boettcher 2008-02-20 13:59 ` Ali H.M. Hoseini
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox