* [linux-dvb] Tools to edit TS files
@ 2008-02-15 19:39 Andrea
2008-02-15 19:56 ` Christophe Thommeret
0 siblings, 1 reply; 4+ messages in thread
From: Andrea @ 2008-02-15 19:39 UTC (permalink / raw)
To: linux-dvb
Hi,
I'd like to edit TS files (recorded with gnutv for instance).
Basically I'd like to cut, paste and join to skip commercials.
Is there a tool for that out there?
Otherwise I was thinking of writing one.
I understand that I must cut on a 188 bytes boundary and that should be the only requirement.
1) Reading the Transport Stream page on wikipedia, it seems there is a timer PCR. Can I use it to
know about the time?
2) Can I cut at the end of a frame so I avoid spurious frames in the first seconds?
But again, does anybody know a tool for that?
Andrea
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [linux-dvb] Tools to edit TS files
2008-02-15 19:39 [linux-dvb] Tools to edit TS files Andrea
@ 2008-02-15 19:56 ` Christophe Thommeret
2008-02-15 20:07 ` John Drescher
2008-02-15 20:53 ` Andrea
0 siblings, 2 replies; 4+ messages in thread
From: Christophe Thommeret @ 2008-02-15 19:56 UTC (permalink / raw)
To: linux-dvb; +Cc: Andrea
Le vendredi 15 février 2008 20:39, Andrea a écrit :
> Hi,
>
> I'd like to edit TS files (recorded with gnutv for instance).
> Basically I'd like to cut, paste and join to skip commercials.
>
> Is there a tool for that out there?
>
> Otherwise I was thinking of writing one.
> I understand that I must cut on a 188 bytes boundary and that should be the
> only requirement.
>
> 1) Reading the Transport Stream page on wikipedia, it seems there is a
> timer PCR. Can I use it to know about the time?
> 2) Can I cut at the end of a frame so I avoid spurious frames in the first
> seconds?
>
> But again, does anybody know a tool for that?
http://project-x.sourceforge.net/
--
Christophe Thommeret
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [linux-dvb] Tools to edit TS files
2008-02-15 19:56 ` Christophe Thommeret
@ 2008-02-15 20:07 ` John Drescher
2008-02-15 20:53 ` Andrea
1 sibling, 0 replies; 4+ messages in thread
From: John Drescher @ 2008-02-15 20:07 UTC (permalink / raw)
To: Christophe Thommeret; +Cc: Andrea, linux-dvb
> http://project-x.sourceforge.net/
>
I second that. This tool not only cuts but it will also fix a lot of
AV sync problems.
John
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [linux-dvb] Tools to edit TS files
2008-02-15 19:56 ` Christophe Thommeret
2008-02-15 20:07 ` John Drescher
@ 2008-02-15 20:53 ` Andrea
1 sibling, 0 replies; 4+ messages in thread
From: Andrea @ 2008-02-15 20:53 UTC (permalink / raw)
To: Christophe Thommeret; +Cc: linux-dvb
Christophe Thommeret wrote:
> Le vendredi 15 février 2008 20:39, Andrea a écrit :
>> Hi,
>>
>> I'd like to edit TS files (recorded with gnutv for instance).
>> Basically I'd like to cut, paste and join to skip commercials.
>>
>> Is there a tool for that out there?
>>
>
> http://project-x.sourceforge.net/
>
Thanks!
It looks pretty sophisticated!
Andrea
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2008-02-15 20:53 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-02-15 19:39 [linux-dvb] Tools to edit TS files Andrea
2008-02-15 19:56 ` Christophe Thommeret
2008-02-15 20:07 ` John Drescher
2008-02-15 20:53 ` Andrea
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox