From: Antti Palosaari <crope@iki.fi>
To: Albert Comerma <albert.comerma@gmail.com>
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] Yuan EC372S (STK7700D based device)
Date: Tue, 19 Feb 2008 00:05:17 +0200 [thread overview]
Message-ID: <47BA011D.9060003@iki.fi> (raw)
In-Reply-To: <ea4209750802181306tcc8c98clff330d4289523d96@mail.gmail.com>
[-- Attachment #1: Type: text/plain, Size: 3838 bytes --]
moi
It does not work for me. It says same PID-filter timeout as I have got
earlier. I don't have amplified antenna now, but I can say that all
other DVB-T sticks I have are working with this small antenna. It could
be that sensitivity of this hardware is bad or there is something wrong
with driver or firmware. Lets try to test it Windows to see if it is
working or not.
Logs attached.
regards
Antti
Albert Comerma wrote:
> Hey people, we already solved this problems. I submitted a patch a few
> days ago, but I think it's not on the current sources. I send again the
> patch. Basically it must use the same frontend description as asus cards.
>
> Albert
>
> 2008/2/18, Antti Palosaari <crope@iki.fi <mailto:crope@iki.fi>>:
>
> moikka
> I have also this device (express card). I haven't looked inside yet, but
> I think there is DibCOM STK7700D (in my understanding dual demod chip)
> and only *one* MT2266 tuner. I tried various GPIO settings but no
> luck yet.
> GPIO6 is for MT2266.
> GPIO9 and GPIO10 are for frontend.
>
> Looks like tuner goes to correct frequency because I got always
> PID-filter timeouts when tuning to correct freq. I will now try to take
> some usb-sniffs to see configuration used. Any help is welcome.
>
> regards
> Antti
>
> Albert Comerma wrote:
> > Hi!, with Michel (mm-sl@ibelgique.com
> <mailto:mm-sl@ibelgique.com> <mailto:mm-sl@ibelgique.com
> <mailto:mm-sl@ibelgique.com>>) who
>
> > is a owner of this Yuan card we added the device to
> dib0700_devices, and
> > we got it recognized without problems. The only problem is that no
> > channel is detected on scan on kaffeine or other software... I
> post some
> > dmesg. We don't know where it may be the problem... or how to
> detect it...
> >
> > usb 4-2: new high speed USB device using ehci_hcd and address 6
> > usb 4-2: new device found, idVendor=1164, idProduct=1edc
> > usb 4-2: new device strings: Mfr=1, Product=2, SerialNumber=3
> > usb 4-2: Product: STK7700D
> > usb 4-2: Manufacturer: YUANRD
> > usb 4-2: SerialNumber: 0000000001
> > usb 4-2: configuration #1 chosen from 1 choice
> > dvb-usb: found a 'Yuan EC372S' in cold state, will try to load a
> firmware
> > dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
> > dib0700: firmware started successfully.
> > dvb-usb: found a 'Yuan EC372S' in warm state.
> > dvb-usb: will pass the complete MPEG2 transport stream to the
> software
> > demuxer.
> > DVB: registering new adapter (Yuan EC372S)
> > dvb-usb: no frontend was attached by 'Yuan EC372S'
> > dvb-usb: will pass the complete MPEG2 transport stream to the
> software
> > demuxer.
> > DVB: registering new adapter (Yuan EC372S)
> > DVB: registering frontend 1 (DiBcom 7000PC)...
> > MT2266: successfully identified
> > input: IR-receiver inside an USB DVB receiver as /class/input/input10
> > dvb-usb: schedule remote query interval to 150 msecs.
> > dvb-usb: Yuan EC372S successfully initialized and connected.
> >
> >
>
> >
> ------------------------------------------------------------------------
> >
> > _______________________________________________
> > linux-dvb mailing list
> > linux-dvb@linuxtv.org <mailto:linux-dvb@linuxtv.org>
> > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
>
>
> --
> http://palosaari.fi/
>
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
--
http://palosaari.fi/
[-- Attachment #2: lsusb_Yuan_EC372S.txt --]
[-- Type: text/plain, Size: 3002 bytes --]
Bus 001 Device 005: ID 1164:1edc YUAN High-Tech Development Co., Ltd
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x1164 YUAN High-Tech Development Co., Ltd
idProduct 0x1edc
bcdDevice 1.00
iManufacturer 1 YUANRD
iProduct 2 STK7700D
iSerial 3 0000000001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 46
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
Remote Wakeup
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
[-- Attachment #3: Yuan_EC372S.txt --]
[-- Type: text/plain, Size: 2545 bytes --]
Feb 18 23:50:53 localhost kernel: usb 1-8: USB disconnect, address 5
Feb 18 23:50:55 localhost kernel: usb 1-8: new high speed USB device using ehci_hcd and address 6
Feb 18 23:50:55 localhost kernel: usb 1-8: configuration #1 chosen from 1 choice
Feb 18 23:50:55 localhost kernel: dib0700: loaded with support for 6 different device-types
Feb 18 23:50:55 localhost kernel: dvb-usb: found a 'Yuan EC372S' in cold state, will try to load a firmware
Feb 18 23:50:55 localhost kernel: dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
Feb 18 23:50:55 localhost kernel: dib0700: firmware started successfully.
Feb 18 23:50:56 localhost kernel: dvb-usb: found a 'Yuan EC372S' in warm state.
Feb 18 23:50:56 localhost kernel: dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Feb 18 23:50:56 localhost kernel: DVB: registering new adapter (Yuan EC372S)
Feb 18 23:50:56 localhost kernel: DVB: registering frontend 0 (DiBcom 7000PC)...
Feb 18 23:50:56 localhost kernel: MT2266: successfully identified
Feb 18 23:50:56 localhost kernel: dvb-usb: Yuan EC372S successfully initialized and connected.
Feb 18 23:50:56 localhost kernel: usbcore: registered new interface driver dvb_usb_dib0700
[crope@localhost linuxtv]$ scandvb fi-Oulu
scanning fi-Oulu
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 634000000 0 2 9 3 1 2 0
initial transponder 714000000 0 2 9 3 1 2 0
initial transponder 738000000 0 2 9 3 1 2 0
initial transponder 602000000 0 2 9 3 1 2 0
>>> tune to: 634000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to: 714000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to: 738000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
>>> tune to: 602000000:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE
WARNING: filter timeout pid 0x0011
WARNING: filter timeout pid 0x0000
WARNING: filter timeout pid 0x0010
dumping lists (0 services)
Done.
[crope@localhost linuxtv]$
[-- Attachment #4: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next prev parent reply other threads:[~2008-02-18 22:06 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <ea4209750801161224p6b75d7fanbdcd29e7d367802d@mail.gmail.com>
2008-02-18 18:57 ` [linux-dvb] Yuan EC372S (STK7700D based device) Antti Palosaari
2008-02-18 21:06 ` Albert Comerma
2008-02-18 22:05 ` Antti Palosaari [this message]
2008-02-18 22:24 ` Albert Comerma
2008-02-18 22:53 ` Antti Palosaari
2008-02-18 23:30 ` Albert Comerma
2008-02-20 12:48 ` Antti Palosaari
2008-02-20 13:53 ` Albert Comerma
2008-02-20 15:29 ` Antti Palosaari
2008-02-26 21:54 ` Albert Comerma
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47BA011D.9060003@iki.fi \
--to=crope@iki.fi \
--cc=albert.comerma@gmail.com \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox