From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.wnex.hu ([87.229.43.150] ident=postfix) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1JTxV3-00028E-Sx for linux-dvb@linuxtv.org; Tue, 26 Feb 2008 11:57:29 +0100 Received: from localhost (localhost [127.0.0.1]) by mail.wnex.hu (Postfix) with ESMTP id 336511A9D352 for ; Tue, 26 Feb 2008 11:57:26 +0100 (CET) Received: from mail.wnex.hu ([127.0.0.1]) by localhost (mail.wnex.hu [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id QkGKFhKeNRpG for ; Tue, 26 Feb 2008 11:57:23 +0100 (CET) Received: from [152.66.146.156] (dhcp-156.i.wlan.bme.hu [152.66.146.156]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by mail.wnex.hu (Postfix) with ESMTP id 215CB1A9D34D for ; Tue, 26 Feb 2008 11:57:23 +0100 (CET) Message-ID: <47C3F093.9030902@bytestorm.hu> Date: Tue, 26 Feb 2008 11:57:23 +0100 From: =?ISO-8859-2?Q?Fr=FChwald_Szabolcs?= MIME-Version: 1.0 To: linux-dvb@linuxtv.org Subject: [linux-dvb] cx88-input: leadtek tv200xp global List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: hi there, i've a leadtek tv2000xp global pci card it's running OK (with some errors, but works) with current developement v4l-dvb branch i tried to enable it's IR remote control too in cx88-input.c just copied tv2000xp expert switch entry: case CX88_BOARD_WINFAST2000XP_EXPERT: ir_codes = ir_codes_winfast; ir->gpio_addr = MO_GP0_IO; ir->mask_keycode = 0x8f8; ir->mask_keyup = 0x100; ir->polling = 1; /* ms */ break; but the result of this was: IR recognized well by kernel, dev/input device attached but when i pressed a button on remote, it printed its character, waited a sec and started to repeat this character forever so, i pressed '6', out was: 6<1sec_delay>666666666666666666666666666666666666666666666666666 .... etc.. could anybody help me to correct this? it would be cool if i could paste a patch to the mailing list to enable this functionality for this card i figured out the main problem is with "ir->mask_keyup=0x100", so maybe it isn't there... but i didnt find it at 0x60,0x80 too and don't know where could it be?? ps: I also tried to comment out this line of code (as i saw some other entrys without this option), the repeats are stopped but when i pressed a button more than once it's only showed up once. So, i pressed 6, printed 6 but when i pressed 6 again, it didnt print anything. After i pressed other button (printed once too), and pressed again 6, prints 6 again). Thanks for your help... bye, Szab _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb