Re: [linux-dvb] cx88-input: leadtek tv200xp global - ??

["Frühwald Szabolcs" <szab100@bytestorm.hu>]

anybody?? please..


Frühwald Szabolcs írta:
> hi there,
>
> i've a leadtek tv2000xp global pci card
> it's running OK (with some errors, but works) with current developement
> v4l-dvb branch
> i tried to enable it's IR remote control too in cx88-input.c
> just copied tv2000xp expert switch entry:
>
> case CX88_BOARD_WINFAST2000XP_EXPERT:
>                  ir_codes = ir_codes_winfast;
>                  ir->gpio_addr = MO_GP0_IO;
>                  ir->mask_keycode = 0x8f8;
>                  ir->mask_keyup = 0x100;
>                  ir->polling = 1; /* ms */
>                  break;
>
> but the result of this was: IR recognized well by kernel, dev/input
> device attached
> but when i pressed a button on remote, it printed its character, waited
> a sec and started to repeat this character forever
> so, i pressed '6', out was:
> 6<1sec_delay>666666666666666666666666666666666666666666666666666 .... etc..
> could anybody help me to correct this?
> it would be cool if i could paste a patch to the mailing list to enable
> this functionality for this card
> i figured out the main problem is with "ir->mask_keyup=0x100", so maybe
> it isn't there... but i didnt find it at 0x60,0x80 too and don't know
> where could it be??
>
> ps: I also tried to comment out this line of code (as i saw some other
> entrys without this option), the repeats are stopped but when i pressed
> a button more than once it's only showed up once. So, i pressed 6,
> printed 6 but when i pressed 6 again, it didnt print anything. After i
> pressed other button (printed once too), and pressed again 6, prints 6
> again).
>
> Thanks for your help...
>
> bye,
> Szab
>
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>   


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb