* [linux-dvb] make errors multiproto
@ 2008-02-20 8:02 Michael Curtis
0 siblings, 0 replies; 5+ messages in thread
From: Michael Curtis @ 2008-02-20 8:02 UTC (permalink / raw)
To: linux-dvb
Hi all
The following errors occurred during the 'make all' of the multiproto
install
The mercurial was the latest from jusste.de
I am using the TT3200 so the stb0899 errors will matter
/home/mythtv/dvb/multiproto/v4l/dvb_frontend.c: In function
'dvb_frontend_thread':
/home/mythtv/dvb/multiproto/v4l/dvb_frontend.c:1123: warning: unused
variable 'status'
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c: In function
'stb0899_diseqc_init':
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:834: warning: unused
variable 'ret_2'
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:833: warning: unused
variable 'ret_1'
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:832: warning: unused
variable 'trial'
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:830: warning: unused
variable 'i'
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:830: warning: unused
variable 'count'
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:826: warning: unused
variable 'rx_data'
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c: In function
'stb0899_sleep':
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:899: warning: unused
variable 'reg'
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c: In function
'stb0899_track':
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1935: warning: unused
variable 'internal'
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1932: warning: unused
variable 'lock_lost'
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c: At top level:
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1727: warning:
'stb0899_track_carrier' defined but not used
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1744: warning:
'stb0899_get_ifagc' defined but not used
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1761: warning:
'stb0899_get_s1fec' defined but not used
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1789: warning:
'stb0899_get_modcod' defined but not used
/home/mythtv/dvb/multiproto/v4l/radio-si470x.c: In function
'si470x_get_rds_registers':
/home/mythtv/dvb/multiproto/v4l/radio-si470x.c:562: warning: format '%d'
expects type 'int', but argument 3 has type 'long unsigned int'
Regards
Mike curtis
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [linux-dvb] make errors multiproto
@ 2008-02-26 13:01 Michael Curtis
2008-02-27 23:05 ` Manu Abraham
0 siblings, 1 reply; 5+ messages in thread
From: Michael Curtis @ 2008-02-26 13:01 UTC (permalink / raw)
To: linux-dvb
Can anyone help with this please?
-----Original Message-----
From: linux-dvb-bounces@linuxtv.org [mailto:linux-dvb-bounces@linuxtv.org] On Behalf Of Michael Curtis
Sent: 20 February 2008 08:03
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] make errors multiproto
Hi all
The following errors occurred during the 'make all' of the multiproto
install
The mercurial was from the above date
I am using the TT3200 so the stb0899 errors will matter
/home/mythtv/dvb/multiproto/v4l/dvb_frontend.c: In function
'dvb_frontend_thread':
/home/mythtv/dvb/multiproto/v4l/dvb_frontend.c:1123: warning: unused
variable 'status'
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c: In function
'stb0899_diseqc_init':
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:834: warning: unused
variable 'ret_2'
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:833: warning: unused
variable 'ret_1'
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:832: warning: unused
variable 'trial'
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:830: warning: unused
variable 'i'
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:830: warning: unused
variable 'count'
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:826: warning: unused
variable 'rx_data'
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c: In function
'stb0899_sleep':
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:899: warning: unused
variable 'reg'
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c: In function
'stb0899_track':
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1935: warning: unused
variable 'internal'
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1932: warning: unused
variable 'lock_lost'
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c: At top level:
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1727: warning:
'stb0899_track_carrier' defined but not used
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1744: warning:
'stb0899_get_ifagc' defined but not used
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1761: warning:
'stb0899_get_s1fec' defined but not used
/home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1789: warning:
'stb0899_get_modcod' defined but not used
/home/mythtv/dvb/multiproto/v4l/radio-si470x.c: In function
'si470x_get_rds_registers':
/home/mythtv/dvb/multiproto/v4l/radio-si470x.c:562: warning: format '%d'
expects type 'int', but argument 3 has type 'long unsigned int'
Regards
Mike curtis
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
--
This message has been scanned for viruses and
dangerous content by IC-MailScanner, and is
believed to be clean.
For queries or information please contact:-
=================================
Internet Central Technical Support
http://www.netcentral.co.uk
=================================
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.20.9/1294 - Release Date: 22/02/2008 18:39
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.21.1/1299 - Release Date: 26/02/2008 09:08
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [linux-dvb] make errors multiproto
2008-02-26 13:01 [linux-dvb] make errors multiproto Michael Curtis
@ 2008-02-27 23:05 ` Manu Abraham
0 siblings, 0 replies; 5+ messages in thread
From: Manu Abraham @ 2008-02-27 23:05 UTC (permalink / raw)
To: Michael Curtis; +Cc: linux-dvb
Michael Curtis wrote:
> Can anyone help with this please?
>
Disable that relevant module by using a custom config, such as
using make menuconfig, or make xconfig or whatever.
Regards,
Manu
> -----Original Message-----
> From: linux-dvb-bounces@linuxtv.org [mailto:linux-dvb-bounces@linuxtv.org] On Behalf Of Michael Curtis
> Sent: 20 February 2008 08:03
> To: linux-dvb@linuxtv.org
> Subject: [linux-dvb] make errors multiproto
>
> Hi all
>
> The following errors occurred during the 'make all' of the multiproto
> install
>
> The mercurial was from the above date
>
> I am using the TT3200 so the stb0899 errors will matter
>
>
> /home/mythtv/dvb/multiproto/v4l/dvb_frontend.c: In function
> 'dvb_frontend_thread':
> /home/mythtv/dvb/multiproto/v4l/dvb_frontend.c:1123: warning: unused
> variable 'status'
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c: In function
> 'stb0899_diseqc_init':
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:834: warning: unused
> variable 'ret_2'
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:833: warning: unused
> variable 'ret_1'
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:832: warning: unused
> variable 'trial'
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:830: warning: unused
> variable 'i'
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:830: warning: unused
> variable 'count'
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:826: warning: unused
> variable 'rx_data'
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c: In function
> 'stb0899_sleep':
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:899: warning: unused
> variable 'reg'
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c: In function
> 'stb0899_track':
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1935: warning: unused
> variable 'internal'
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1932: warning: unused
> variable 'lock_lost'
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c: At top level:
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1727: warning:
> 'stb0899_track_carrier' defined but not used
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1744: warning:
> 'stb0899_get_ifagc' defined but not used
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1761: warning:
> 'stb0899_get_s1fec' defined but not used
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1789: warning:
> 'stb0899_get_modcod' defined but not used
> /home/mythtv/dvb/multiproto/v4l/radio-si470x.c: In function
> 'si470x_get_rds_registers':
> /home/mythtv/dvb/multiproto/v4l/radio-si470x.c:562: warning: format '%d'
> expects type 'int', but argument 3 has type 'long unsigned int'
>
> Regards
>
> Mike curtis
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [linux-dvb] make errors multiproto
@ 2008-03-01 13:34 Michael Curtis
2008-03-02 6:25 ` Igor
0 siblings, 1 reply; 5+ messages in thread
From: Michael Curtis @ 2008-03-01 13:34 UTC (permalink / raw)
To: Manu Abraham; +Cc: linux-dvb
Manu, I do not understand your response
I am using the TT3200 and so the stb0899 module will be required
I cannot see how make menuconfig can disable the stb0899 module as it is not a recognised module in 2.6.23.137
Although if I ignore the errors, the modules appear to compile and then load
Output from lsmod
Module Size Used by
nls_utf8 10305 1
vfat 19009 1
fat 54513 1 vfat
rfcomm 50537 0
l2cap 36289 9 rfcomm
bluetooth 64453 4 rfcomm,l2cap
sunrpc 168009 1
cpufreq_ondemand 15569 1
loop 23493 0
dm_multipath 24401 0
ipv6 307273 18
osst 57193 0
st 43109 0
lnbp21 10240 1
stb6100 15748 1
stb0899 41728 1
saa7134_dvb 24076 0
videobuf_dvb 13316 1 saa7134_dvb
tda1004x 23300 2 saa7134_dvb
sr_mod 23397 1
cdrom 40553 1 sr_mod
snd_hda_intel 361577 3
snd_seq_dummy 11461 0
snd_seq_oss 37313 0
snd_seq_midi_event 15041 1 snd_seq_oss
snd_seq 56673 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 15061 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 45889 0
snd_mixer_oss 22721 1 snd_pcm_oss
snd_pcm 80201 2 snd_hda_intel,snd_pcm_oss
snd_timer 27721 2 snd_seq,snd_pcm
snd_page_alloc 16465 2 snd_hda_intel,snd_pcm
budget_ci 30980 0
budget_core 17668 1 budget_ci
saa7134 148572 1 saa7134_dvb
videodev 33664 1 saa7134
v4l1_compat 19460 1 videodev
compat_ioctl32 16128 1 saa7134
v4l2_common 26240 3 saa7134,videodev,compat_ioctl32
videobuf_dma_sg 19716 3 saa7134_dvb,videobuf_dvb,saa7134
videobuf_core 24196 3 videobuf_dvb,saa7134,videobuf_dma_sg
ir_kbd_i2c 16912 1 saa7134
snd_hwdep 16073 1 snd_hda_intel
dvb_core 89684 3 videobuf_dvb,budget_ci,budget_core
saa7146 23688 2 budget_ci,budget_core
ttpci_eeprom 10496 1 budget_core
firewire_ohci 25281 0
ir_common 41732 3 budget_ci,saa7134,ir_kbd_i2c
snd 60137 15
snd_hda_intel,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_o
ss,snd_pcm,snd_timer,snd_hwdep
nvidia 8895940 24
firewire_core 46337 1 firewire_ohci
crc_itu_t 10433 1 firewire_core
aic7xxx 133501 0
scsi_transport_spi 32577 1 aic7xxx
parport_pc 35177 0
tveeprom 24848 1 saa7134
soundcore 15073 1 snd
sg 40297 0
forcedeth 53321 0
parport 42317 1 parport_pc
pcspkr 11329 0
button 15969 0
pata_amd 20293 0
k8temp 13377 0
hwmon 11081 1 k8temp
i2c_nforce2 14017 0
usblp 20801 0
i2c_core 28865 14
lnbp21,stb6100,stb0899,saa7134_dvb,tda1004x,budget_ci,budget_core,saa713
4,v4l2_common,ir_kbd_i2c,ttpci_eeprom,nvidia,tveeprom,i2c_nforce2
usb_storage 87681 2
dm_snapshot 23049 0
dm_zero 10433 0
dm_mirror 27200 0
dm_mod 57905 9
dm_multipath,dm_snapshot,dm_zero,dm_mirror
ata_generic 14533 0
sata_nv 25285 2
libata 114288 3 pata_amd,ata_generic,sata_nv
sd_mod 33345 5
scsi_mod 146553 9
osst,st,sr_mod,aic7xxx,scsi_transport_spi,sg,usb_storage,libata,sd_mod
ext3 127569 2
jbd 64945 1 ext3
mbcache 15937 1 ext3
uhci_hcd 30689 0
ohci_hcd 27973 0
ehci_hcd 39245 0
But then the best I can get with with zapping using your modified szap is
status 00 | signal 0000 | snr 0004 | ber 00000000 | unc fffffffe | status 1e | signal 0136 | snr 005f | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1e | signal 0136 | snr 005f | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1e | signal 0136 | snr 0060 | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1e | signal 0136 | snr 005e | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1e | signal 0136 | snr 005e | ber 00000000 | unc fffffffe | FE_HAS_LOCK
I need to know if I am on the right track or those compile errors are having an influence on the performance of the TT3200 frontend
The signal strength should be >50-60% and quality >80%
Best Regards
Michael Curtis wrote:
> Can anyone help with this please?
>
Disable that relevant module by using a custom config, such as
using make menuconfig, or make xconfig or whatever.
Regards,
Manu
> -----Original Message-----
> From: linux-dvb-bounces@linuxtv.org [mailto:linux-dvb-bounces@linuxtv.org] On Behalf Of Michael Curtis
> Sent: 20 February 2008 08:03
> To: linux-dvb@linuxtv.org
> Subject: [linux-dvb] make errors multiproto
>
> Hi all
>
> The following errors occurred during the 'make all' of the multiproto
> install
>
> The mercurial was from the above date
>
> I am using the TT3200 so the stb0899 errors will matter
>
>
> /home/mythtv/dvb/multiproto/v4l/dvb_frontend.c: In function
> 'dvb_frontend_thread':
> /home/mythtv/dvb/multiproto/v4l/dvb_frontend.c:1123: warning: unused
> variable 'status'
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c: In function
> 'stb0899_diseqc_init':
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:834: warning: unused
> variable 'ret_2'
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:833: warning: unused
> variable 'ret_1'
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:832: warning: unused
> variable 'trial'
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:830: warning: unused
> variable 'i'
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:830: warning: unused
> variable 'count'
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:826: warning: unused
> variable 'rx_data'
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c: In function
> 'stb0899_sleep':
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:899: warning: unused
> variable 'reg'
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c: In function
> 'stb0899_track':
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1935: warning: unused
> variable 'internal'
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1932: warning: unused
> variable 'lock_lost'
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c: At top level:
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1727: warning:
> 'stb0899_track_carrier' defined but not used
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1744: warning:
> 'stb0899_get_ifagc' defined but not used
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1761: warning:
> 'stb0899_get_s1fec' defined but not used
> /home/mythtv/dvb/multiproto/v4l/stb0899_drv.c:1789: warning:
> 'stb0899_get_modcod' defined but not used
> /home/mythtv/dvb/multiproto/v4l/radio-si470x.c: In function
> 'si470x_get_rds_registers':
> /home/mythtv/dvb/multiproto/v4l/radio-si470x.c:562: warning: format '%d'
> expects type 'int', but argument 3 has type 'long unsigned int'
>
> Regards
>
> Mike curtis
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
--
This message has been scanned for viruses and
dangerous content by IC-MailScanner, and is
believed to be clean.
For queries or information please contact:-
=================================
Internet Central Technical Support
http://www.netcentral.co.uk
=================================
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.21.2/1305 - Release Date: 29/02/2008 18:32
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.5.516 / Virus Database: 269.21.2/1305 - Release Date: 29/02/2008 18:32
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [linux-dvb] make errors multiproto
2008-03-01 13:34 Michael Curtis
@ 2008-03-02 6:25 ` Igor
0 siblings, 0 replies; 5+ messages in thread
From: Igor @ 2008-03-02 6:25 UTC (permalink / raw)
To: Michael Curtis; +Cc: linux-dvb, Manu Abraham
> Manu, I do not understand your response
other words - you can forget about this warnings (not errors)
> I am using the TT3200 and so the stb0899 module will be required
>
> I cannot see how make menuconfig can disable the stb0899 module as it is not a recognised module in 2.6.23.137
>
> Although if I ignore the errors, the modules appear to compile and then load
fine.
> But then the best I can get with with zapping using your modified szap is
>
> status 00 | signal 0000 | snr 0004 | ber 00000000 | unc fffffffe | status 1e | signal 0136 | snr 005f | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1e | signal 0136 | snr 005f | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1e | signal 0136 | snr 0060 | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1e | signal 0136 | snr 005e | ber 00000000 | unc fffffffe | FE_HAS_LOCK status 1e | signal 0136 | snr 005e | ber 00000000 | unc fffffffe | FE_HAS_LOCK
>
> I need to know if I am on the right track or those compile errors are having an influence on the performance of the TT3200 frontend
yes, you on the right track and you can continue your tests wit TT3200
> The signal strength should be >50-60% and quality >80%
please mean - szap2 shows the dB in hex.
Igor
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2008-03-02 6:25 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-02-26 13:01 [linux-dvb] make errors multiproto Michael Curtis
2008-02-27 23:05 ` Manu Abraham
-- strict thread matches above, loose matches on Subject: below --
2008-03-01 13:34 Michael Curtis
2008-03-02 6:25 ` Igor
2008-02-20 8:02 Michael Curtis
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox