From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from vitalin.sorra.shikadi.net ([64.71.152.201]) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1JUgU1-0004fx-2i for linux-dvb@linuxtv.org; Thu, 28 Feb 2008 11:59:25 +0100 Message-ID: <47C69404.3040504@shikadi.net> Date: Thu, 28 Feb 2008 20:59:16 +1000 From: Adam Nielsen MIME-Version: 1.0 To: Martin Thompson References: <9FC6541BF8D049BB839E9F30F5258D64@LaptopPC> <47C67A3C.6050602@shikadi.net> <99BC16843B464C4C9081D5DF5DDA98BE@LaptopPC> In-Reply-To: <99BC16843B464C4C9081D5DF5DDA98BE@LaptopPC> Cc: linux-dvb@linuxtv.org Subject: Re: [linux-dvb] dvico dual digital 4 revision 2.0 List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: > nothing in dmesg > firmware in folder > chris asked me for a ssh box > is installed and ready to go > only thing loaded is chris's v4l tree > if you wanted to have a look ill email you the details If Chris is looking into it then that's good, I'm not exactly an expert in these sorts of things. > heres the lsusb > > Bus 005 Device 003: ID 0fe9:db98 DVICO > Bus 005 Device 002: ID 0fe9:db98 DVICO > > Note the hw id mine end in 98 yours in 78 If nothing is showing up in dmesg then the driver mustn't be trying to load the firmware - I suspect that getting the driver to load the firmware, and finding the right firmware, will be enough to get it to work - they don't usually change that much between hardware revisions. Cheers, Adam. _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb