Re: [linux-dvb] STB0899 users, please verify results was Re: TechniSat SkyStar HD: Problems scaning and zaping

[Seppo Ingalsuo <seppo.ingalsuo@iki.fi>]

Seppo Ingalsuo wrote:
> Manu Abraham wrote:
>   
>> Seppo Ingalsuo wrote:
>>     
>>> Simeon Simeonov wrote:
>>>       
>>>> Did you try changing line 250 in mantis_dvb.c to:
>>>>                 if (!lnbp21_attach(mantis->fe, &mantis->adapter, 
>>>> LNBP21_PCL, LNBP21_ISEL)) {
>>>>   
>>>>         
>>> I tried mantis-a9ecd19a37c9. Without the change success in 
>>> positioning was about 0% similarly as with multiproto-0448e5a6d8a6. 
>>> After this change the success in zapping between different satellite 
>>> positions increased to about 40% so it looks now promising and vdr 
>>> satellite channels are usable with some patience :^)
>>>       
>> You mean the LNBP21 attach line improved things for you by 40% ?
>>     
Now I've run original multiproto-8db34ae061ed driver for a day. It 
achives about similar success (my guess 40%) in driving my positioner 
motor as the edited mantis tree driver. As far as I understand the code 
the lnbp21_attach in ttpci/budget-ci.c is different from Simeon's 
proposed attach command for mantis. => I hope my comments are not 
confusing the development.

Excluding driving/commanding the motor, the current multiproto driver 
works well in DVB-S/DVB-S2 (and 2xDVB-T)  zapping.

BR,
Seppo


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb