From: Carl Karsten <carl@personnelware.com>
To: video4linux-list@redhat.com
Subject: Re: vivi.c stuck my CPU
Date: Sun, 02 Mar 2008 20:52:49 -0600 [thread overview]
Message-ID: <47CB6801.4060503@personnelware.com> (raw)
In-Reply-To: <47CB2689.3010707@personnelware.com>
Carl Karsten wrote:
> [2950.237132] BUG: soft lockup - CPU#0 stuck for 11s! [vivi:9709]
> any chance that is an application problem ?
>
CPU#0 stuck came from using transcode:
++ transcode -i /dev/video0 -x v4l2,null -g 640x480 --dv_yuy2_mode -V yuv422p -k
--encode_fields p
I rebooted, loaded vivi and tried xawtv. Didn't crash as hard, but none the
less, things aren't right.
juser@vaio:~$ sudo modprobe vivi
[ 184.053222] Linux video capture interface: v2.00
[ 184.070413] vivi: V4L2 device registered as /dev/video0
[ 184.070424] Video Technology Magazine Virtual Video Capture Board ver 0.5.0
successfully loaded.
juser@vaio:~$ xawtv
This is xawtv-3.95.dfsg.1, running on Linux/i686 (2.6.24-10-generic)
/dev/video0 [v4l2]: no overlay support
v4l-conf had some trouble, trying to continue anyway
Warning: Cannot convert string "-*-ledfixed-medium-r-*--39-*-*-*-c-*-*-*" to
type FontStruct
ioctl: VIDIOC_REQBUFS(count=2;type=VIDEO_CAPTURE;memory=MMAP): Success
ioctl: VIDIOC_DQBUF(index=0;type=VIDEO_CAPTURE;bytesused=0;flags=0x0
[];field=ANY;;timecode.type=0;timecode.flags=0;timecode.frames=0;timecode.seconds=0;timecode.minutes=0;timecode.hours=0;timecode.userbits="";sequence=0;memory=MMAP):
Input/output error
[ 251.821907] vivi: open called (minor=0)
[ 251.823664] vivi: open called (minor=0)
[ 251.824152] vivi: open called (minor=0)
[ 314.810130] vivi/0: [d7491a00/0] timeout
[ 314.810141] vivi/0: [d7491280/1] timeout
[ 251.821907] vivi: open called (minor=0)
[ 251.823664] vivi: open called (minor=0)
[ 251.824152] vivi: open called (minor=0)
[ 314.810130] vivi/0: [d7491a00/0] timeout
[ 314.810141] vivi/0: [d7491280/1] timeout
[ 586.440266] vivi: open called (minor=0)
[ 586.480991] vivi: open called (minor=0)
[ 650.181535] vivi/0: [d64dfd80/1] timeout
[ 650.181546] vivi/0: [d64dfe80/2] timeout
[ 650.181551] vivi/0: [d64df980/3] timeout
[ 650.181555] vivi/0: [d64dfe00/4] timeout
[ 650.181559] vivi/0: [d64df100/5] timeout
[ 650.181563] vivi/0: [d64df800/6] timeout
[ 650.181567] vivi/0: [d64dfd00/7] timeout
[ 650.181571] vivi/0: [d64dff80/8] timeout
[ 650.181575] vivi/0: [d64df680/9] timeout
[ 650.181579] vivi/0: [d791d380/10] timeout
[ 650.181583] vivi/0: [d7996d80/11] timeout
[ 650.181587] vivi/0: [d7996380/12] timeout
[ 650.181592] vivi/0: [d6d25e00/13] timeout
[ 650.181596] vivi/0: [d6d25e80/14] timeout
[ 650.181600] vivi/0: [d6d25f80/15] timeout
[ 650.181604] vivi/0: [d6d25f00/16] timeout
[ 650.181608] vivi/0: [d6d25300/17] timeout
[ 650.181612] vivi/0: [d6d25080/18] timeout
[ 650.181616] vivi/0: [d6d25400/19] timeout
[ 650.181620] vivi/0: [d6d25580/20] timeout
[ 650.181624] vivi/0: [d6d25d80/21] timeout
[ 650.181628] vivi/0: [d6d25d00/22] timeout
[ 650.181632] vivi/0: [d6d25c80/23] timeout
[ 650.181636] vivi/0: [d6d25b80/24] timeout
[ 650.181640] vivi/0: [d6d25700/25] timeout
[ 650.181644] vivi/0: [d6d25a00/26] timeout
[ 650.181648] vivi/0: [d6d25200/27] timeout
[ 650.181652] vivi/0: [d6d25800/28] timeout
[ 650.181656] vivi/0: [d6d25000/29] timeout
[ 650.181660] vivi/0: [d7491280/30] timeout
[ 650.181665] vivi/0: [d7491a00/31] timeout
[ 650.181671] vivi/0: [d64dfc80/0] timeout
If someone will point me in the right direction, I'll write a test app to
reproduce this.
And where is the right place to report bugs?
Carl K
ps hope ya'll don't get tired of my test quest.)
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
next prev parent reply other threads:[~2008-03-03 2:53 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-02 22:13 vivi.c stuck my CPU Carl Karsten
2008-03-03 2:52 ` Carl Karsten [this message]
2008-03-03 6:34 ` Carl Karsten
2008-03-03 18:08 ` Carl Karsten
2008-03-12 23:33 ` Brandon Philips
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47CB6801.4060503@personnelware.com \
--to=carl@personnelware.com \
--cc=video4linux-list@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox