public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: Hartmut Hackmann <hartmut.hackmann@t-online.de>
To: hermann pitton <hermann-pitton@arcor.de>
Cc: video4linux-list@redhat.com, linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] saa7134: Asus Tiger revision 1.0, subsys 1043:4857 improvements
Date: Thu, 06 Mar 2008 22:40:02 +0100	[thread overview]
Message-ID: <47D064B2.6010803@t-online.de> (raw)
In-Reply-To: <1204753679.6717.29.camel@pc08.localdom.local>

Hi, Hermann

hermann pitton schrieb:
> Hi, Harmut,
> 
> was able to purchase such a device recently.
> 
> For me it looks like they have been on OEM stuff only previously. 
> The panel for the internal connectors is soldered, the analog audio out
> is there too and fine.
> 
> For all what I could look up, it had never support for the PC-39 remote
> we added for revision 2.0, since all seen so far comes up with gpio init
> 0, the remote IRQ to sample from is never active.
> 
> Folks, please report if it comes with that RC5 style remote too.
> 
> It has a firmware eeprom.
> 
> It turns out, and some previous reports pointed to it without to become
> speficic, but contradictions on what the ms driver does on antenna input
> switching, that this one has only a male FM connector and a female RF
> connector.
> 
> So, currently we force people with that card to put the DVB-T antenna
> input on the male FM-connector, which might be quit inconvenient ...
> 
indeed ;-)

> If nobody disagrees, and also my thesis of the not ever delivered remote
> is right, we should change the auto detection to use card=81, the
> Philips Tiger reference design you developed on.
> 
> Cheers,
> Hermann
> 
> 
> Stuff currently in that machine. We have also one byte different in the
> eeprom here.
> 
> Linux video capture interface: v2.00
> saa7130/34: v4l2 driver version 0.2.14 loaded
> saa7133[0]: found at 0000:01:07.0, rev: 208, irq: 17, latency: 32, mmio: 0xe8000000
> saa7133[0]: subsystem: 1043:4857, board: Philips Tiger reference design [card=81,insmod option]
> saa7133[0]: board init: gpio is 0
> saa7133[0]: i2c eeprom 00: 43 10 57 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
> saa7133[0]: i2c eeprom 10: 00 01 20 00 ff 20 ff ff ff ff ff ff ff ff ff ff
> saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 cb ff ff ff ff
>                                                             ^^
<snip>
> tuner' 2-004b: chip found @ 0x96 (saa7133[0])
> tda829x 2-004b: setting tuner address to 61
> tda829x 2-004b: type set to tda8290+75a
> saa7133[0]: registered device video0 [v4l2]
> saa7133[0]: registered device vbi0
> saa7133[0]: registered device radio0
> saa7133[1]: found at 0000:01:08.0, rev: 208, irq: 19, latency: 32, mmio: 0xe8001000
> saa7133[1]: subsystem: 1043:4862, board: ASUSTeK P7131 Dual [card=78,autodetected]
> saa7133[1]: board init: gpio is 0   <------ remote sensor is broken, else 0x40000
> input: saa7134 IR (ASUSTeK P7131 Dual) as /class/input/input6
> tuner' 3-004b: chip found @ 0x96 (saa7133[1])
> tda829x 3-004b: setting tuner address to 61
> tda829x 3-004b: type set to tda8290+75a
> saa7133[1]: i2c eeprom 00: 43 10 62 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
> saa7133[1]: i2c eeprom 10: 00 01 20 00 ff 20 ff ff ff ff ff ff ff ff ff ff
> saa7133[1]: i2c eeprom 20: 01 40 01 02 03 01 01 03 08 ff 00 d6 ff ff ff ff
>                                                             ^^
<snip>

I guess you checked the entire eepron content ;-)
According to the documentation i have, there is no config byte describing the
assignment of antenna sockets. The document says that this byte is a checksum!!!
I will try to get some information.
I found one discrepancy:
The Tiger uses LINE1 for the audio baseband inputs while the ASUS uses LINE2.
Can you cross check this?

Best regards
  Hartmut


--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list

  reply	other threads:[~2008-03-06 21:40 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-03-05 21:47 saa7134: Asus Tiger revision 1.0, subsys 1043:4857 improvements hermann pitton
2008-03-06 21:40 ` Hartmut Hackmann [this message]
2008-03-06 23:21   ` [linux-dvb] " hermann pitton
2008-03-08  0:17     ` hermann pitton

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=47D064B2.6010803@t-online.de \
    --to=hartmut.hackmann@t-online.de \
    --cc=hermann-pitton@arcor.de \
    --cc=linux-dvb@linuxtv.org \
    --cc=video4linux-list@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox