From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mx3.redhat.com (mx3.redhat.com [172.16.48.32]) by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id m2ALN4CM031060 for ; Mon, 10 Mar 2008 17:23:04 -0400 Received: from mailout04.sul.t-online.com (mailout04.sul.t-online.de [194.25.134.18]) by mx3.redhat.com (8.13.8/8.13.8) with ESMTP id m2ALMUXe009020 for ; Mon, 10 Mar 2008 17:22:31 -0400 Message-ID: <47D5A68C.7070004@t-online.de> Date: Mon, 10 Mar 2008 22:22:20 +0100 From: Hartmut Hackmann MIME-Version: 1.0 To: tux@schweikarts-vom-dach.de References: <200801051252.18108.tux@schweikarts-vom-dach.de> <200802272151.19488.tux@schweikarts-vom-dach.de> <47CC8094.8000106@t-online.de> <200803101942.40158.tux@schweikarts-vom-dach.de> In-Reply-To: <200803101942.40158.tux@schweikarts-vom-dach.de> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8bit Cc: video4linux-list@redhat.com Subject: Re: DVB-S on quad TV tuner card from Medion PC MD8800 List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: video4linux-list-bounces@redhat.com Errors-To: video4linux-list-bounces@redhat.com List-ID: HI Tux schrieb: > Hello Hartmut, > > sorry that it has taken so long time to test it. I have tried it with option > use_frontend=1,1 and now it is posible to watch TV on the other > port. > > best regards > > Tux > > Am Montag, 3. März 2008 23:49:56 schrieben Sie: >> Hi >> >> Tux schrieb: >>> Hello Hartmut, >>> >>> i have tried the new driver. You are completely right, one port is >>> working perfectly. But the other one not. What Information do you need to >>> fix it ? >>> >>> >>> best regards >> >> >> in my personal repository: http://linuxtv.org/hg/~hhackmann/v4l-dvb/ >> i tried to make the 2nd section work too. I don't know which gpo is >> the right one to control the LNB supply, i need you to find out whether >> switching the polarization works. >> There are remaining restrictions: >> - the 2nd DVB-S section only works if the first is configured for DVB-S >> too. so "options saa7134-dvb use_frontend=0,1" won't work, but >> use_frontend=1,0 and use_frontend=1,1 should. >> - currently it is not possible to choose the higher LNB voltage (14v >> instead of 13v) - it is not possible to power down the 2nd LNB supply >> independently. These are due to the fact that it is not possible to access >> the LNB supply chip via the i2c bus fron the second section of the card. >> >> Happy testing >> Hartmut >> It's fully working? Great! I expected more trouble. I'd like to rework the code a bit before i ask Mauro to pull. May I ask you to test again in some days? Best regards Hartmut -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list