From: Antti Palosaari <crope@iki.fi>
To: Jarryd Beck <jarro.2783@gmail.com>
Cc: Michael Krufky <mkrufky@linuxtv.org>, linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] NXP 18211HDC1 tuner
Date: Fri, 14 Mar 2008 20:30:05 +0200 [thread overview]
Message-ID: <47DAC42D.7010306@iki.fi> (raw)
In-Reply-To: <47DA7008.8010404@linuxtv.org>
Michael Krufky wrote:
> 4.3 is not close enough to 3.8. If you don't know how to set the demod
> to 3.8, then we can do some hacks to make it work, but signal reception
> is likely to be very poor -- better off looking in his snoop log to see
> how the windows driver sets the demod to 3.8
OI have looked sniffs and tested linux driver and found that it is set
to 3800. There is 4300 kHz set in eeprom, it is ok for 8 MHz but not for
6 or 7. Looks like driver needs to do some quirks when this tuner is
used. Anyhow, patch attached is hardcoded to use 3.8 now.
Jarryd, please test. Also some changes to stick plug done, if it does
not work for you can fix it as earlier.
regards
Antti
--
http://palosaari.fi/
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next prev parent reply other threads:[~2008-03-14 18:30 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-10 1:36 [linux-dvb] NXP 18211HDC1 tuner Jarryd Beck
2008-03-10 1:46 ` Michael Krufky
[not found] ` <abf3e5070803092042q6f4e90d9h890efb0ea441419e@mail.gmail.com>
2008-03-10 4:28 ` Michael Krufky
2008-03-10 7:39 ` Jarryd Beck
2008-03-10 9:56 ` Antti Palosaari
2008-03-10 11:12 ` Jarryd Beck
2008-03-10 13:38 ` Michael Krufky
2008-03-10 21:15 ` Jarryd Beck
2008-03-10 21:59 ` Antti Palosaari
2008-03-11 21:05 ` Jarryd Beck
2008-03-11 23:25 ` Michael Krufky
2008-03-12 0:08 ` Jarryd Beck
2008-03-12 1:46 ` Michael Krufky
2008-03-12 2:02 ` Steven Toth
2008-03-12 3:06 ` Jarryd Beck
2008-03-12 12:49 ` Michael Krufky
2008-03-12 14:02 ` Antti Palosaari
2008-03-12 15:06 ` mkrufky
2008-03-12 20:36 ` Jarryd Beck
2008-03-12 20:54 ` Michael Krufky
2008-03-12 21:07 ` Jarryd Beck
2008-03-12 21:09 ` mkrufky
2008-03-12 21:12 ` Jarryd Beck
2008-03-12 21:14 ` mkrufky
2008-03-12 21:25 ` Jarryd Beck
2008-03-12 21:28 ` mkrufky
2008-03-12 23:11 ` Antti Palosaari
2008-03-13 2:20 ` Jarryd Beck
2008-03-13 23:07 ` Jarryd Beck
2008-03-14 0:13 ` Antti Palosaari
2008-03-14 2:53 ` Jarryd Beck
2008-03-14 3:19 ` Michael Krufky
2008-03-14 3:22 ` Jarryd Beck
2008-03-14 3:33 ` Jarryd Beck
2008-03-14 4:28 ` Michael Krufky
2008-03-14 4:40 ` Antti Palosaari
2008-03-14 5:37 ` Antti Palosaari
2008-03-14 12:31 ` Michael Krufky
2008-03-14 18:30 ` Antti Palosaari [this message]
2008-03-14 18:32 ` Antti Palosaari
2008-03-15 13:06 ` Jarryd Beck
2008-03-15 13:21 ` Jarryd Beck
2008-03-15 14:22 ` Antti Palosaari
2008-03-15 23:42 ` Jarryd Beck
2008-03-16 0:08 ` Antti Palosaari
2008-03-16 0:27 ` Jarryd Beck
2008-03-16 0:37 ` Antti Palosaari
2008-03-16 0:40 ` Jarryd Beck
2008-03-16 0:42 ` Michael Krufky
2008-03-16 0:47 ` Michael Krufky
2008-03-16 1:27 ` Jarryd Beck
2008-03-16 1:39 ` Antti Palosaari
2008-03-16 2:01 ` Jarryd Beck
2008-03-16 2:04 ` Antti Palosaari
2008-03-16 4:29 ` Michael Krufky
2008-03-16 2:04 ` Michael Krufky
2008-03-16 3:25 ` Jarryd Beck
2008-03-16 3:28 ` Michael Krufky
2008-03-18 2:14 ` Antti Palosaari
2008-03-20 2:01 ` Jarryd Beck
2008-03-20 2:29 ` Antti Palosaari
2008-03-20 2:39 ` Jarryd Beck
2008-03-24 5:32 ` Jarryd Beck
2008-03-24 5:35 ` Jarryd Beck
2008-03-24 11:58 ` Antti Palosaari
2008-03-24 11:59 ` Jarryd Beck
2008-03-24 11:56 ` Antti Palosaari
2008-03-14 4:33 ` Antti Palosaari
2008-03-14 4:26 ` Antti Palosaari
[not found] <mailman.135.1205356481.830.linux-dvb@linuxtv.org>
2008-03-13 0:02 ` ras243-dvb
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47DAC42D.7010306@iki.fi \
--to=crope@iki.fi \
--cc=jarro.2783@gmail.com \
--cc=linux-dvb@linuxtv.org \
--cc=mkrufky@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox