From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Message-ID: <47DBDB9F.5060107@iki.fi> Date: Sat, 15 Mar 2008 16:22:23 +0200 From: Antti Palosaari MIME-Version: 1.0 To: Jarryd Beck References: <47D9C33E.6090503@iki.fi> <47D9EED4.8090303@linuxtv.org> <47DA0F01.8010707@iki.fi> <47DA7008.8010404@linuxtv.org> <47DAC42D.7010306@iki.fi> <47DAC4BE.5090805@iki.fi> In-Reply-To: Cc: Michael Krufky , linux-dvb@linuxtv.org Subject: Re: [linux-dvb] NXP 18211HDC1 tuner List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: Jarryd Beck wrote: > > Michael's patch didn't produce any interesting dmesg output. I included > > dmesg for plugging in and tuning with antti's patch. First errors came from same situation as earlier, no_reconnect. But it finally still worked. > Just realised I didn't have debug enabled for Michael's patch. When > tuning I got lots of this: > > tda18271_set_standby_mode: sm = 0, sm_lt = 0, sm_xt = 0 > tda18271_init_regs: initializing registers for device @ 1-00c0 > tda18271_tune: freq = 219500000, ifc = 3800000, bw = 7000000, std = 0x1d > > My keyboard was fine this time (that was the point it normally responded > really slowly), and the driver loaded instantly instead of taking nearly > half a minute. > It looks like it might be a step in the right direction, but it's still > not tuning. > > Jarryd. Frequency control values of the demodulator seems to be ok now. Also adc and coeff looks correct. It is hard to say where is problem... Can you test if demodulator can detect TPS parameter automatically? You can do that inserting AUTO to initial tuning file, for example set FEC AUTO. And then "scan tuning-file" regards Antti -- http://palosaari.fi/ _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb