From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.hauppauge.com ([167.206.143.4]) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1Jagxw-0006yH-PR for linux-dvb@linuxtv.org; Sun, 16 Mar 2008 01:43:10 +0100 Message-ID: <47DC6D11.6010004@linuxtv.org> Date: Sat, 15 Mar 2008 20:42:57 -0400 From: Michael Krufky MIME-Version: 1.0 To: Jarryd Beck References: <47DAC42D.7010306@iki.fi> <47DAC4BE.5090805@iki.fi> <47DBDB9F.5060107@iki.fi> <47DC64F4.9070403@iki.fi> <47DC6BC6.4080307@iki.fi> In-Reply-To: Cc: Antti Palosaari , linux-dvb@linuxtv.org Subject: Re: [linux-dvb] NXP 18211HDC1 tuner List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: Jarryd Beck wrote: > On Sun, Mar 16, 2008 at 11:37 AM, Antti Palosaari wrote: > >> Jarryd Beck wrote: >> > Here's the first frequency it tuned to, as you can see the >> > one you set auto on is still auto, it didn't seem to autodetect >> > anything. It was the same for all the other frequencies as well. >> > >> >>>> tune to: 226500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_1_16:HIERARCHY_NONE >> > WARNING: >>> tuning failed!!! >> >>>> tune to: 226500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_AUTO:GUARD_INTERVAL_1_16:HIERARCHY_NONE >> > (tuning failed) >> > WARNING: >>> tuning failed!!! >> >> It does not matter what scan outputs as tuning parameters because it >> just shows same parameter that are set by used tuning file (at least >> when tuning fails). Driver will still try to auto detect correct >> parameters. In this case it still fails for reason or other that is not >> found yet. >> >> >> >> regards >> Antti >> -- >> http://palosaari.fi/ >> >> > > So the fact that it failed isn't actually telling us anything extra then? > Would it only have been useful if it had actually worked? > Also just to make sure I'm using the right drivers here, I'm using > Michael's patch and not Antti's patch. Since it kernel oopses with > both, Antti, do you want me to try with just your patch and not > Michael's? > > Jarryd. > You need to use that patch of mine because I dont think the af9015 i2c likes 39-byte i2c transfers. The patch that I sent to you breaks the tda182x1 register initialization into 16 register chunks. -Mike _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb