From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.hauppauge.com ([167.206.143.4]) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1JajXu-0007rX-4f for linux-dvb@linuxtv.org; Sun, 16 Mar 2008 04:28:31 +0100 Message-ID: <47DC93D0.3090904@linuxtv.org> Date: Sat, 15 Mar 2008 23:28:16 -0400 From: Michael Krufky MIME-Version: 1.0 To: Jarryd Beck References: <47DAC4BE.5090805@iki.fi> <47DBDB9F.5060107@iki.fi> <47DC64F4.9070403@iki.fi> <47DC6E0A.9000904@linuxtv.org> <47DC8012.3050809@linuxtv.org> In-Reply-To: Cc: Antti Palosaari , linux-dvb@linuxtv.org Subject: Re: [linux-dvb] NXP 18211HDC1 tuner List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: Jarryd Beck wrote: > On Sun, Mar 16, 2008 at 1:04 PM, Michael Krufky wrote: > >> Jarryd Beck wrote: >> > On Sun, Mar 16, 2008 at 11:47 AM, Michael Krufky wrote: >> >> Antti Palosaari wrote: >> >> > I have no idea how to debug more. Without device it is rather hard to >> >> > test many things. It will help a little if we know is tuner locked. >> >> > Mike, is it easy to add debug writing for tuner to indicate if tuner >> >> > is locked or not locked? I have used that method earlier with mt2060 >> >> > tuner... >> >> >> >> There is a lock bit in register 0x01[6] but I have not found it to be >> >> reliable, especially not on the c1 part. >> >> >> >> -Mike >> >> >> >> >> >> >> > >> > You won't believe this, but it worked. I think every time I tried both >> > patches together I left .no_reconnect in. I tried it again with both >> > patches applied, no other modifications, and it worked. >> > >> > Thanks for all your help, >> > Jarryd. >> >> This is great news! For an experiment, can you try once more without my patch applied? >> >> This will just confirm whether or not we can write all 39 registers at once. >> >> If the patch that I gave you is truly needed, then I will integrate it into the official driver. >> >> Regards, >> >> Mike >> >> > > Takes half a minute to load when plugging in, keyboard is slow to respond > when tuning, and I get lots of this: > > af9013_i2c_gate_ctrl: enable:0 > af9013_i2c_gate_ctrl: enable:1 > > Applied the patch again and it was all fine. > > Jarryd. > Thanks for the test, Jarryd. I will integrate this into the official tda18271 driver after testing again on my hardware here. I will probably make it an attach-time configurable option. Regards, Mike _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb