From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.gmx.net ([213.165.64.20]) by www.linuxtv.org with smtp (Exim 4.63) (envelope-from ) id 1JbrqL-0003h9-OW for linux-dvb@linuxtv.org; Wed, 19 Mar 2008 07:32:19 +0100 Message-ID: <47E0B346.2090701@gmx.net> Date: Wed, 19 Mar 2008 07:31:34 +0100 From: "P. van Gaans" MIME-Version: 1.0 To: Faruk A References: <854d46170803181612wa79a469m9faf56b929577583@mail.gmail.com> In-Reply-To: <854d46170803181612wa79a469m9faf56b929577583@mail.gmail.com> Cc: linux-dvb@linuxtv.org Subject: Re: [linux-dvb] TT Connect S2-3650 CI unsupported device but partially working List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: On 03/19/2008 12:12 AM, Faruk A wrote: > TechnoTrend TT-connect S2-3650 CI > Vendor ID: 0b48 > Product ID: 300a > http://www.technotrend.de/2715/TT-connect__S2-3650_CI.html > = > Hi > = > This my first DVB card i bought it two weeks ago and it works great in > windows, I knew it was unsupported in Linux but it was cheap and plus > CI :) i couldn't resist. > = > I saw Dominik Kuhlen's Pinnacle 452e and Andr=E9 Weidemann's TT-connect > S2-3600 patch and i thought why not try it and i did. All i did was > change product id from 3007 to 300a, downloaded the the source, > patched it and compiled. > = > cd v4l > insmod dvb-core.ko > insmod dvb-pll.ko > insmod stb6100.ko verbose=3D0 > insmod stb0899.ko verbose=3D0 > insmod lnbp22.ko > insmod dvb-usb.ko > insmod dvb-usb-pctv452e.ko > ............................................. > dmesg > = > dvb-usb: found a 'Technotrend TT connect S2-3600' in warm state. > pctv452e_power_ctrl: 1 > dvb-usb: will pass the complete MPEG2 transport stream to the software de= muxer. > DVB: registering new adapter (Technotrend TT connect S2-3600) > pctv452e_frontend_attach Enter > stb0899_write_regs [0xf1b6]: 02 > stb0899_write_regs [0xf1c2]: 00 > stb0899_write_regs [0xf1c3]: 00 > stb0899_write_regs [0xf141]: 02 > _stb0899_read_reg: Reg=3D[0xf000], data=3D82 > stb0899_get_dev_id: ID reg=3D[0x82] > stb0899_get_dev_id: Device ID=3D[8], Release=3D[2] > _stb0899_read_s2reg Device=3D[0xf3fc], Base address=3D[0x00000400], > Offset=3D[0xf334], Data=3D[0x444d4431] > _stb0899_read_s2reg Device=3D[0xf3fc], Base address=3D[0x00000400], > Offset=3D[0xf33c], Data=3D[0x00000001] > stb0899_get_dev_id: Demodulator Core ID=3D[DMD1], Version=3D[1] > _stb0899_read_s2reg Device=3D[0xfafc], Base address=3D[0x00000800], > Offset=3D[0xfa2c], Data=3D[0x46454331] > _stb0899_read_s2reg Device=3D[0xfafc], Base address=3D[0x00000800], > Offset=3D[0xfa34], Data=3D[0x00000001] > stb0899_get_dev_id: FEC Core ID=3D[FEC1], Version=3D[1] > stb0899_attach: Attaching STB0899 > lnbp22_set_voltage: 2 (18V=3D1 13V=3D0) > lnbp22_set_voltage: 0x60) > pctv452e_frontend_attach Leave Ok > DVB: registering frontend 0 (STB0899 Multistandard)... > pctv452e_tuner_attach Enter > stb6100_attach: Attaching STB6100 > pctv452e_tuner_attach Leave > input: IR-receiver inside an USB DVB receiver as > /devices/pci0000:00/0000:00:1d.7/usb5/5-4/input/input8 > dvb-usb: schedule remote query interval to 500 msecs. > pctv452e_power_ctrl: 0 > dvb-usb: Technotrend TT connect S2-3600 successfully initialized and conn= ected. > usbcore: registered new interface driver pctv452e > ................................................................. > = > ls /dev/dvb/adapter0/ > demux0 dvr0 frontend0 net0 > ......................................................................... > I can scan the channels using patched scan program but vdr format > output doesn't work, it just make > empty channels.conf file. The zap format works :) > = > I can lock to lnb1 (Thor 1W) lnb2 (Sirius 5E) lnb3 (Hotbird 13E) lnb4 > (Astra 19E) using the patched szap but when i wanna lock to channels > on different satellite i have to always first lock on lnb1 (Thor). > One more thing it doesn't lock with multiproto changeset 7208 and above. > = > No CI support and remote control is like 80% percent working. > .........................................................................= ........................................................ > I have tried vdr with this card not good at all :( or maybe its just > me. As i mentioned before the scan > program doesn't produce the vdr format. I had to use vdr settings from > this site http://www.linowsat.com. > = > When i start vdr it doesn't lock to any channels or satellite just > plain no signal, I have have to first szap -r "any channels on lnb1" > kill it and start vdr i can only get pictures from only 2 FTA channels > BBC World;Telenor:11325:hC78:S1.0W:24500:513:644=3Deng:577:0:1001:70:25:0 > Gospel Channel Europe;Telenor:11325:hC78:S1.0W:24500:514:648=3Deng:0:0:12= 9:70:25:0 > i can't switch to different satellite just plain no signal maybe wrong > diseqc settings? > = > This is what i have in diseqc.conf > # Input 1 - Thor - uncommited switch input 1 > = > S1W 11700 V 9750 t v W15 [E0 10 39 F0] W125 [E0 10 38 F0] W15 t > S1W 99999 V 10600 t v W15 [E0 10 39 F0] W125 [E0 10 38 F0] W15 T > S1W 11700 H 9750 t V W15 [E0 10 39 F0] W125 [E0 10 38 F0] W15 t > S1W 99999 H 10600 t V W15 [E0 10 39 F0] W125 [E0 10 38 F0] W15 T > = > # Input 2 - Sirius 5.0E - uncommited switch input 1 > = > S5E 11700 V 9750 t v W15 [E0 10 39 F0] W125 [E0 10 38 F4] W15 t > S5E 99999 V 10600 t v W15 [E0 10 39 F0] W125 [E0 10 38 F4] W15 T > S5E 11700 H 9750 t V W15 [E0 10 39 F0] W125 [E0 10 38 F4] W15 t > S5E 99999 H 10600 t V W15 [E0 10 39 F0] W125 [E0 10 38 F4] W15 T > = > # Input 3 - Hotbird - uncommited switch input 1 > = > S13E 11700 V 9750 t v W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 t > S13E 99999 V 10600 t v W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 T > S13E 11700 H 9750 t V W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 t > S13E 99999 H 10600 t V W15 [E0 10 39 F0] W125 [E0 10 38 F8] W15 T > = > # Input 4 Astra 1 19.2E - uncommited switch input 1 > = > S19.2E 11700 V 9750 t v W15 [E0 10 39 F0] W125 [E0 10 38 FC] W15 t > S19.2E 99999 V 10600 t v W15 [E0 10 39 F0] W125 [E0 10 38 FC] W15 T > S19.2E 11700 H 9750 t V W15 [E0 10 39 F0] W125 [E0 10 38 FC] W15 t > S19.2E 99999 H 10600 t V W15 [E0 10 39 F0] W125 [E0 10 38 FC] W15 T > .........................................................................= ............................................ > In Windows with Alt-DVB > = > Type: Commited LNB: 1 Raw command: E0 10 38 F0 > Type: Commited LNB: 2 Raw command: E0 10 38 F4 > Type: Commited LNB: 3 Raw command: E0 10 38 F8 > Type: Commited LNB: 4 Raw command: E0 10 38 FC > .........................................................................= ............................................. > = > = > Anybody wanna works on this this? I'd be willing to help in any way I can. > = > Best regards, > Faruk > = > = > ------------------------------------------------------------------------ > = > _______________________________________________ > linux-dvb mailing list > linux-dvb@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb I don't know diseqc.conf (VDR-specific?) or VDR, but the comment says = "uncommited switch input 1" everywhere and I see two DiSEqC messages = (most likely one for an uncommitted switch, and the other to switch the = committed switch behind that). You most likely have no uncommitted = switches, and if you did you wouldn't need any. You only have one simple = 4/1 committed switch. Uncommitted only comes in when you need more than = 4 LNBs and means you will use DiSEqC 1.1. You don't use or need that, = you only need DiSeqC 1.0. _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb