From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from fridge.mylittleisp.net ([82.70.254.25]) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1JdmPv-0006oh-GK for linux-dvb@linuxtv.org; Mon, 24 Mar 2008 14:08:51 +0100 Received: from macmini.mdsh.local (toaster.mylittleisp.net [82.70.254.29]) by fridge.mylittleisp.net (8.12.8/8.12.8) with ESMTP id m2OD8NZ7006509 for ; Mon, 24 Mar 2008 13:08:24 GMT Message-ID: <47E7A7C7.1050906@mdsh.com> Date: Mon, 24 Mar 2008 13:08:23 +0000 From: Mark Himsley MIME-Version: 1.0 To: linux-dvb@linuxtv.org Content-Type: multipart/mixed; boundary="------------050503050108000402070804" Subject: [linux-dvb] Nebula DigiTV USB slave DVB-T is not working List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: This is a multi-part message in MIME format. --------------050503050108000402070804 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Hi, I have two Nebula DigiTV master DVB-T USB devices and one slave device. All three worked in Windows in any combination (so long as a master was also attached if the slave was). In Linux the two masters work perfectly, I can make multiple recordings off two multiplexes in MythTV. I cannot make the slave work though. Attached is the output of `sudo lsusb -v > digiTV-slave-master-master.txt` - Bus 005 Device 008 is the slave and Bus 5 device 006 and 004 are the masters. Attached is also the end of /var/log/syslog showing the moment the slave is connected. I am interested that the slave device mentions an IR-receiver, I thought only the masters had that (perhaps the salve is only lacking the actual IR receiver component from the PCB). I can use tzap on all three devices and they achieve lock and report similar signal strength & snr and report ber & unc are both zero. Currently I have the two master devices plugged in first so they are /dev/dvb/adapter0 and 1, and the slave device plugged in last so it is dev/dvb/adapter2. The problem I am seeing is that I cannot get any data out of /dev/dvb/adapter2/dvr0. If I `tzap -a 2 -r 'BBC ONE'` in one terminal and `cat /dev/dvb/adapter2/dvr0 > temp.ts` for ten seconds I get a grand total of zero bytes. If I do the same to adapter 0 or 1 I get lots of bytes. I also have an issue when I unplug the slave device, /dev/dvb/adapter2/* does not disappear and I need to reboot, so I have also attached the end of /var/log/syslog when the device is removed. Is this a known issue or can I provide any further information to get this working. Thanks. --------------050503050108000402070804 Content-Type: text/plain; name="digiTV-slave-master-master.txt" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="digiTV-slave-master-master.txt" Bus 005 Device 008: ID 0547:0201 Anchor Chips, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0547 Anchor Chips, Inc. idProduct 0x0201 bcdDevice 0.00 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x40 (Missing must-be-set bit!) Self Powered MaxPower 400mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0002 (Bus Powered) Remote Wakeup Enabled Bus 005 Device 006: ID 0547:0201 Anchor Chips, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0547 Anchor Chips, Inc. idProduct 0x0201 bcdDevice 0.00 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x40 (Missing must-be-set bit!) Self Powered MaxPower 400mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0002 (Bus Powered) Remote Wakeup Enabled Bus 005 Device 004: ID 0547:0201 Anchor Chips, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0547 Anchor Chips, Inc. idProduct 0x0201 bcdDevice 0.00 iManufacturer 1 iProduct 2 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 39 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x40 (Missing must-be-set bit!) Self Powered MaxPower 400mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 3 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0002 (Bus Powered) Remote Wakeup Enabled Bus 005 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 1 Single TT bMaxPacketSize0 64 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.22-14-generic ehci_hcd iProduct 2 EHCI Host Controller iSerial 1 0000:00:1d.7 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 11 bDescriptorType 41 nNbrPorts 8 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 0x00 PortPwrCtrlMask 0xff 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0503 highspeed power enable connect Port 4: 0000.0503 highspeed power enable connect Port 5: 0000.0100 power Port 6: 0000.0100 power Port 7: 0000.0100 power Port 8: 0000.0503 highspeed power enable connect Device Status: 0x0003 Self Powered Remote Wakeup Enabled Bus 004 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed hub bMaxPacketSize0 64 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.22-14-generic uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:1d.3 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Bus 003 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed hub bMaxPacketSize0 64 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.22-14-generic uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:1d.2 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Bus 002 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed hub bMaxPacketSize0 64 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.22-14-generic uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:1d.1 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Bus 001 Device 001: ID 0000:0000 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 0 Full speed hub bMaxPacketSize0 64 idVendor 0x0000 idProduct 0x0000 bcdDevice 2.06 iManufacturer 3 Linux 2.6.22-14-generic uhci_hcd iProduct 2 UHCI Host Controller iSerial 1 0000:00:1d.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0002 1x 2 bytes bInterval 255 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 2 wHubCharacteristic 0x000a No power switching (usb 1.0) Per-port overcurrent protection bPwrOn2PwrGood 1 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled --------------050503050108000402070804 Content-Type: text/plain; name="syslog-insert" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="syslog-insert" Mar 24 11:48:22 bedroom kernel: [760308.452226] usb 5-8: new high speed USB device using ehci_hcd and address 7 Mar 24 11:48:22 bedroom kernel: [760308.584562] usb 5-8: configuration #1 chosen from 1 choice Mar 24 11:48:22 bedroom kernel: [760308.584630] dvb-usb: found a 'Nebula Electronics uDigiTV DVB-T USB2.0)' in cold state, will try to load a firmware Mar 24 11:48:22 bedroom NetworkManager: [1206359302.601952] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_547_201_noserial_1'). Mar 24 11:48:22 bedroom kernel: [760308.634520] dvb-usb: downloading firmware from file 'dvb-usb-digitv-02.fw' Mar 24 11:48:22 bedroom kernel: [760308.665416] usb 5-8: USB disconnect, address 7 Mar 24 11:48:22 bedroom kernel: [760308.668126] dvb-usb: generic DVB-USB module successfully deinitialized and disconnected. Mar 24 11:48:22 bedroom NetworkManager: [1206359302.932929] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_ffffffff_ffffffff_noserial'). Mar 24 11:48:22 bedroom NetworkManager: [1206359302.937207] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_ffffffff_ffffffff_noserial'). Mar 24 11:48:22 bedroom NetworkManager: [1206359302.944824] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_547_201_noserial_1'). Mar 24 11:48:24 bedroom kernel: [760310.419189] usb 5-8: new high speed USB device using ehci_hcd and address 8 Mar 24 11:48:24 bedroom kernel: [760310.551578] usb 5-8: string descriptor 0 read error: -22 Mar 24 11:48:24 bedroom kernel: [760310.551701] usb 5-8: string descriptor 0 read error: -22 Mar 24 11:48:24 bedroom kernel: [760310.551783] usb 5-8: configuration #1 chosen from 1 choice Mar 24 11:48:24 bedroom kernel: [760310.551976] dvb-usb: found a 'Nebula Electronics uDigiTV DVB-T USB2.0)' in warm state. Mar 24 11:48:24 bedroom kernel: [760310.551997] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. Mar 24 11:48:24 bedroom kernel: [760310.552091] DVB: registering new adapter (Nebula Electronics uDigiTV DVB-T USB2.0)). Mar 24 11:48:24 bedroom kernel: [760310.567197] DVB: registering frontend 2 (Zarlink MT352 DVB-T)... Mar 24 11:48:24 bedroom kernel: [760310.567616] input: IR-receiver inside an USB DVB receiver as /class/input/input8 Mar 24 11:48:24 bedroom kernel: [760310.567638] dvb-usb: schedule remote query interval to 1000 msecs. Mar 24 11:48:24 bedroom kernel: [760310.567641] dvb-usb: Nebula Electronics uDigiTV DVB-T USB2.0) successfully initialized and connected. Mar 24 11:48:24 bedroom NetworkManager: [1206359304.569962] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_547_201_noserial_1'). Mar 24 11:48:24 bedroom NetworkManager: [1206359304.627292] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_547_201_noserial_1_if0'). Mar 24 11:48:24 bedroom NetworkManager: [1206359304.693741] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_547_201_noserial_1_dvb'). Mar 24 11:48:24 bedroom NetworkManager: [1206359304.694330] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_547_201_noserial_1_dvb_0'). Mar 24 11:48:24 bedroom NetworkManager: [1206359304.694911] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_547_201_noserial_1_dvb_1'). Mar 24 11:48:24 bedroom NetworkManager: [1206359304.695472] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_547_201_noserial_1_dvb_2'). Mar 24 11:48:24 bedroom NetworkManager: [1206359304.724135] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_547_201_noserial_1_usbraw'). Mar 24 11:48:24 bedroom NetworkManager: [1206359304.819362] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_547_201_noserial_1_logicaldev_input'). --------------050503050108000402070804 Content-Type: text/plain; name="syslog-remove" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="syslog-remove" Mar 24 12:47:43 bedroom kernel: [763867.512043] usb 5-8: USB disconnect, address 8 Mar 24 12:47:43 bedroom kernel: [763867.523684] dvb-usb: recv bulk message failed: -22 Mar 24 12:47:43 bedroom kernel: [763867.523695] dvb-usb: bulk message failed: -22 (7/-1) Mar 24 12:47:43 bedroom kernel: [763867.523697] dvb-usb: bulk message failed: -22 (7/-1) Mar 24 12:47:43 bedroom kernel: [763867.523957] dvb-usb: bulk message failed: -22 (7/7) Mar 24 12:47:43 bedroom NetworkManager: [1206362863.397312] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/usb_device_547_201_noserial_1_logicaldev_input'). --------------050503050108000402070804 Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb --------------050503050108000402070804--