From: Steven Toth <stoth@linuxtv.org>
To: "Timothy D. Lenz" <tlenz@vorgon.com>
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] Correct drivers for HVR-1800
Date: Wed, 26 Mar 2008 10:08:07 -0400 [thread overview]
Message-ID: <47EA58C7.1010200@linuxtv.org> (raw)
In-Reply-To: <000b01c88f27$93923bf0$0a00a8c0@vorg>
Timothy D. Lenz wrote:
> Found out both the PCIe x1 slots on my motherboard seem to be bad. But the
> card does show up in the x16 slot which i'll using until I can get an RMA
> from Asus (hope they do cross shiping).
>
> I had to blacklist cx23885 so that the nexus drivers would work.
>
> I load driver cx23885 (after the nexus drivers) which then also loads
> compat_ioctl32 and videobuf_dvb. I also have tried loading ivtv which in
> turn loads cx2341x, but these seem to have no effect. I got the firmware
> from http://steventoth.net/linux/hvr1800/, ran the script and put the files
> in /lib/firmware which already has the firmware for my Nexus.
>
> I got dvb-apps but am having problems compiling it. I am able to compile
> just scan and used it to scan for atsc channels. There are 2 channels which
> it says it tunes that don't show up in the list it makes but it also says it
> won't include analog channels in the list :(.
>
> I patched VDR for atsc channels and added the atscepg plugin. I now have 2
> adapters but when I try to scan from the plugin, it says not atsc device
> found. I also tried seeding the channels.conf with a valid atsc channel
> using info posted about the patch/plugin, but I get channel not available
> even if I switch primary devices.
>
> I posted in the dvbn board about the problems with the plugin, but wanted to
> know if I missed any drivers I need to load.
Sounds OK generally. You don't normally have to do anything with with
the drivers to make ATSC or QAM work.
- Steve
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
prev parent reply other threads:[~2008-03-26 14:08 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-03-26 9:51 [linux-dvb] Correct drivers for HVR-1800 Timothy D. Lenz
2008-03-26 14:08 ` Steven Toth [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47EA58C7.1010200@linuxtv.org \
--to=stoth@linuxtv.org \
--cc=linux-dvb@linuxtv.org \
--cc=tlenz@vorgon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox