From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mta5.srv.hcvlny.cv.net ([167.206.4.200]) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1JeWJ2-0006Ob-6T for linux-dvb@linuxtv.org; Wed, 26 Mar 2008 15:08:45 +0100 Received: from steven-toths-macbook-pro.local (ool-18bac60f.dyn.optonline.net [24.186.198.15]) by mta5.srv.hcvlny.cv.net (Sun Java System Messaging Server 6.2-8.04 (built Feb 28 2007)) with ESMTP id <0JYC004L9CLKMJ71@mta5.srv.hcvlny.cv.net> for linux-dvb@linuxtv.org; Wed, 26 Mar 2008 10:08:09 -0400 (EDT) Date: Wed, 26 Mar 2008 10:08:07 -0400 From: Steven Toth In-reply-to: <000b01c88f27$93923bf0$0a00a8c0@vorg> To: "Timothy D. Lenz" Message-id: <47EA58C7.1010200@linuxtv.org> MIME-version: 1.0 References: <000b01c88f27$93923bf0$0a00a8c0@vorg> Cc: linux-dvb@linuxtv.org Subject: Re: [linux-dvb] Correct drivers for HVR-1800 List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: Timothy D. Lenz wrote: > Found out both the PCIe x1 slots on my motherboard seem to be bad. But the > card does show up in the x16 slot which i'll using until I can get an RMA > from Asus (hope they do cross shiping). > > I had to blacklist cx23885 so that the nexus drivers would work. > > I load driver cx23885 (after the nexus drivers) which then also loads > compat_ioctl32 and videobuf_dvb. I also have tried loading ivtv which in > turn loads cx2341x, but these seem to have no effect. I got the firmware > from http://steventoth.net/linux/hvr1800/, ran the script and put the files > in /lib/firmware which already has the firmware for my Nexus. > > I got dvb-apps but am having problems compiling it. I am able to compile > just scan and used it to scan for atsc channels. There are 2 channels which > it says it tunes that don't show up in the list it makes but it also says it > won't include analog channels in the list :(. > > I patched VDR for atsc channels and added the atscepg plugin. I now have 2 > adapters but when I try to scan from the plugin, it says not atsc device > found. I also tried seeding the channels.conf with a valid atsc channel > using info posted about the patch/plugin, but I get channel not available > even if I switch primary devices. > > I posted in the dvbn board about the problems with the plugin, but wanted to > know if I missed any drivers I need to load. Sounds OK generally. You don't normally have to do anything with with the drivers to make ATSC or QAM work. - Steve _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb