* [linux-dvb] [PATCH] new USB-ID for Leadtek Winfast DTV was: Re: New Leadtek Winfast DTV Dongle working - with mods but no RC
[not found] <e44ae5e0712172128p4e1428aao493d0a1725b6fcd3@mail.gmail.com>
@ 2008-03-28 0:29 ` Antti Palosaari
2008-03-29 0:31 ` ptay1685
2008-03-29 21:49 ` Patrick Boettcher
0 siblings, 2 replies; 6+ messages in thread
From: Antti Palosaari @ 2008-03-28 0:29 UTC (permalink / raw)
To: Patrick Boettcher, ptay1685, John; +Cc: linux-dvb, k.bannister
[-- Attachment #1: Type: text/plain, Size: 518 bytes --]
hello
USB-ID for Leadtek Winfast DTV
Signed-off-by: Antti Palosaari <crope@iki.fi>
Patch done against current development-tree at
http://linuxtv.org/hg/~pb/v4l-dvb/
Patrick, could you check and add it?
Could ptay1685 or John or some other test this?
Keith Bannister wrote:
> I hopped onto the IRC channel and crope` (thanks mate) advised me to
> change dvb-usb-ids.h to
>
> #define USB_PID_WINFAST_DTV_DONGLE_STK7700P 0x6f01
Sorry, I forgot make patch earlier...
regards
Antti
--
http://palosaari.fi/
[-- Attachment #2: Leadtek_Winfast_DTV_Dongle_6f01.patch --]
[-- Type: text/x-diff, Size: 1589 bytes --]
diff -r 3d252c252869 linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
--- a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c Sat Mar 22 23:19:38 2008 +0100
+++ b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c Fri Mar 28 02:15:01 2008 +0200
@@ -1115,6 +1115,8 @@ struct usb_device_id dib0700_usb_id_tabl
{ USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_EC372S) },
{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_EXPRESS) },
{ USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS) },
+ { USB_DEVICE(USB_VID_LEADTEK,
+ USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) },
{ 0 } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
@@ -1179,7 +1181,8 @@ struct dvb_usb_device_properties dib0700
{ NULL },
},
{ "Leadtek Winfast DTV Dongle (STK7700P based)",
- { &dib0700_usb_id_table[8], NULL },
+ { &dib0700_usb_id_table[8],
+ &dib0700_usb_id_table[34], NULL },
{ NULL },
},
{ "AVerMedia AVerTV DVB-T Express",
diff -r 3d252c252869 linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
--- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h Sat Mar 22 23:19:38 2008 +0100
+++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h Fri Mar 28 02:15:01 2008 +0200
@@ -180,6 +180,7 @@
#define USB_PID_WINFAST_DTV_DONGLE_COLD 0x6025
#define USB_PID_WINFAST_DTV_DONGLE_WARM 0x6026
#define USB_PID_WINFAST_DTV_DONGLE_STK7700P 0x6f00
+#define USB_PID_WINFAST_DTV_DONGLE_STK7700P_2 0x6f01
#define USB_PID_GENPIX_8PSK_REV_1_COLD 0x0200
#define USB_PID_GENPIX_8PSK_REV_1_WARM 0x0201
#define USB_PID_GENPIX_8PSK_REV_2 0x0202
[-- Attachment #3: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [linux-dvb] [PATCH] new USB-ID for Leadtek Winfast DTV was: Re: New Leadtek Winfast DTV Dongle working - with mods but no RC
2008-03-28 0:29 ` [linux-dvb] [PATCH] new USB-ID for Leadtek Winfast DTV was: Re: New Leadtek Winfast DTV Dongle working - with mods but no RC Antti Palosaari
@ 2008-03-29 0:31 ` ptay1685
2008-03-29 9:58 ` Antti Palosaari
2008-03-29 21:49 ` Patrick Boettcher
1 sibling, 1 reply; 6+ messages in thread
From: ptay1685 @ 2008-03-29 0:31 UTC (permalink / raw)
To: Antti Palosaari, Patrick Boettcher, John; +Cc: linux-dvb, k.bannister
Didnt work for me, sorry. Device still not detected.
Probably me not getting the sources correctly or something - i followed the
directions on linuxtv.org website.
Regards,
Phil T.
----- Original Message -----
From: "Antti Palosaari" <crope@iki.fi>
To: "Patrick Boettcher" <patrick.boettcher@desy.de>; "ptay1685"
<ptay1685@Bigpond.net.au>; "John" <bitumen.surfer@gmail.com>
Cc: <linux-dvb@linuxtv.org>; <k.bannister@ieee.org>
Sent: Friday, March 28, 2008 11:29 AM
Subject: [linux-dvb] [PATCH] new USB-ID for Leadtek Winfast DTV was: Re: New
Leadtek Winfast DTV Dongle working - with mods but no RC
> hello
> USB-ID for Leadtek Winfast DTV
>
> Signed-off-by: Antti Palosaari <crope@iki.fi>
>
> Patch done against current development-tree at
> http://linuxtv.org/hg/~pb/v4l-dvb/
> Patrick, could you check and add it?
>
> Could ptay1685 or John or some other test this?
>
> Keith Bannister wrote:
>> I hopped onto the IRC channel and crope` (thanks mate) advised me to
>> change dvb-usb-ids.h to
>>
>> #define USB_PID_WINFAST_DTV_DONGLE_STK7700P 0x6f01
>
> Sorry, I forgot make patch earlier...
>
> regards
> Antti
> --
> http://palosaari.fi/
>
--------------------------------------------------------------------------------
> diff -r 3d252c252869 linux/drivers/media/dvb/dvb-usb/dib0700_devices.c
> --- a/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c Sat Mar 22
> 23:19:38 2008 +0100
> +++ b/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c Fri Mar 28
> 02:15:01 2008 +0200
> @@ -1115,6 +1115,8 @@ struct usb_device_id dib0700_usb_id_tabl
> { USB_DEVICE(USB_VID_YUAN, USB_PID_YUAN_EC372S) },
> { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_HT_EXPRESS) },
> { USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_XXS) },
> + { USB_DEVICE(USB_VID_LEADTEK,
> + USB_PID_WINFAST_DTV_DONGLE_STK7700P_2) },
> { 0 } /* Terminating entry */
> };
> MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
> @@ -1179,7 +1181,8 @@ struct dvb_usb_device_properties dib0700
> { NULL },
> },
> { "Leadtek Winfast DTV Dongle (STK7700P based)",
> - { &dib0700_usb_id_table[8], NULL },
> + { &dib0700_usb_id_table[8],
> + &dib0700_usb_id_table[34], NULL },
> { NULL },
> },
> { "AVerMedia AVerTV DVB-T Express",
> diff -r 3d252c252869 linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
> --- a/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h Sat Mar 22 23:19:38
> 2008 +0100
> +++ b/linux/drivers/media/dvb/dvb-usb/dvb-usb-ids.h Fri Mar 28 02:15:01
> 2008 +0200
> @@ -180,6 +180,7 @@
> #define USB_PID_WINFAST_DTV_DONGLE_COLD 0x6025
> #define USB_PID_WINFAST_DTV_DONGLE_WARM 0x6026
> #define USB_PID_WINFAST_DTV_DONGLE_STK7700P 0x6f00
> +#define USB_PID_WINFAST_DTV_DONGLE_STK7700P_2 0x6f01
> #define USB_PID_GENPIX_8PSK_REV_1_COLD 0x0200
> #define USB_PID_GENPIX_8PSK_REV_1_WARM 0x0201
> #define USB_PID_GENPIX_8PSK_REV_2 0x0202
>
--------------------------------------------------------------------------------
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [linux-dvb] [PATCH] new USB-ID for Leadtek Winfast DTV was: Re: New Leadtek Winfast DTV Dongle working - with mods but no RC
2008-03-29 0:31 ` ptay1685
@ 2008-03-29 9:58 ` Antti Palosaari
0 siblings, 0 replies; 6+ messages in thread
From: Antti Palosaari @ 2008-03-29 9:58 UTC (permalink / raw)
To: ptay1685; +Cc: k.bannister, linux-dvb
ptay1685 wrote:
> Didnt work for me, sorry. Device still not detected.
>
> Probably me not getting the sources correctly or something - i followed the
> directions on linuxtv.org website.
hg clone http://linuxtv.org/hg/~pb/v4l-dvb/
cd v4l-dvb/
patch -p1 < ../Leadtek_Winfast_DTV_Dongle_6f01.patch
make
make install
Antti
--
http://palosaari.fi/
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [linux-dvb] [PATCH] new USB-ID for Leadtek Winfast DTV was: Re: New Leadtek Winfast DTV Dongle working - with mods but no RC
2008-03-28 0:29 ` [linux-dvb] [PATCH] new USB-ID for Leadtek Winfast DTV was: Re: New Leadtek Winfast DTV Dongle working - with mods but no RC Antti Palosaari
2008-03-29 0:31 ` ptay1685
@ 2008-03-29 21:49 ` Patrick Boettcher
2008-03-29 22:12 ` Antti Palosaari
1 sibling, 1 reply; 6+ messages in thread
From: Patrick Boettcher @ 2008-03-29 21:49 UTC (permalink / raw)
To: Antti Palosaari; +Cc: linux-dvb, ptay1685, k.bannister
Hi Antti,
Daryll Green was first - I committed his patch.
Sorry,
Patrick.
--
Mail: patrick.boettcher@desy.de
WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
On Fri, 28 Mar 2008, Antti Palosaari wrote:
> hello
> USB-ID for Leadtek Winfast DTV
>
> Signed-off-by: Antti Palosaari <crope@iki.fi>
>
> Patch done against current development-tree at
> http://linuxtv.org/hg/~pb/v4l-dvb/
> Patrick, could you check and add it?
>
> Could ptay1685 or John or some other test this?
>
> Keith Bannister wrote:
>> I hopped onto the IRC channel and crope` (thanks mate) advised me to
>> change dvb-usb-ids.h to
>>
>> #define USB_PID_WINFAST_DTV_DONGLE_STK7700P 0x6f01
>
> Sorry, I forgot make patch earlier...
>
> regards
> Antti
> --
> http://palosaari.fi/
>
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [linux-dvb] [PATCH] new USB-ID for Leadtek Winfast DTV was: Re: New Leadtek Winfast DTV Dongle working - with mods but no RC
2008-03-29 21:49 ` Patrick Boettcher
@ 2008-03-29 22:12 ` Antti Palosaari
2008-03-30 1:00 ` J
0 siblings, 1 reply; 6+ messages in thread
From: Antti Palosaari @ 2008-03-29 22:12 UTC (permalink / raw)
To: Patrick Boettcher; +Cc: linux-dvb, ptay1685, k.bannister
hello
Patrick Boettcher wrote:
> Hi Antti,
>
> Daryll Green was first - I committed his patch.
yes, his patch looks just fine, no problem. I did not see Darylls patch
earlier...
regards
Antti
>
> Sorry,
> Patrick.
>
> --
> Mail: patrick.boettcher@desy.de
> WWW: http://www.wi-bw.tfh-wildau.de/~pboettch/
>
> On Fri, 28 Mar 2008, Antti Palosaari wrote:
>
>> hello
>> USB-ID for Leadtek Winfast DTV
>>
>> Signed-off-by: Antti Palosaari <crope@iki.fi>
>>
>> Patch done against current development-tree at
>> http://linuxtv.org/hg/~pb/v4l-dvb/
>> Patrick, could you check and add it?
>>
>> Could ptay1685 or John or some other test this?
>>
>> Keith Bannister wrote:
>>> I hopped onto the IRC channel and crope` (thanks mate) advised me to
>>> change dvb-usb-ids.h to
>>>
>>> #define USB_PID_WINFAST_DTV_DONGLE_STK7700P 0x6f01
>> Sorry, I forgot make patch earlier...
>>
>> regards
>> Antti
>> --
>> http://palosaari.fi/
>>
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
--
http://palosaari.fi/
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: [linux-dvb] [PATCH] new USB-ID for Leadtek Winfast DTV was: Re: New Leadtek Winfast DTV Dongle working - with mods but no RC
2008-03-29 22:12 ` Antti Palosaari
@ 2008-03-30 1:00 ` J
0 siblings, 0 replies; 6+ messages in thread
From: J @ 2008-03-30 1:00 UTC (permalink / raw)
To: Antti Palosaari, Patrick Boettcher; +Cc: linux-dvb
Hi,
The proposed patch appears to do the job for me.
At least when I plug in the dongle I get this in my messages:
Mar 30 11:54:47 localhost kernel: usb 1-4: new high speed USB device
using ehci_hcd and address 8
Mar 30 11:54:47 localhost kernel: usb 1-4: configuration #1 chosen from
1 choice
Mar 30 11:54:47 localhost kernel: dib0700: loaded with support for 5
different device-types
Mar 30 11:54:47 localhost kernel: dvb-usb: found a 'Leadtek Winfast DTV
Dongle (STK7700P based)' in cold state, will try to load a firmware
Mar 30 11:54:47 localhost kernel: dvb-usb: downloading firmware from
file 'dvb-usb-dib0700-1.10.fw'
Mar 30 11:54:48 localhost kernel: dib0700: firmware started
successfully.
Mar 30 11:54:48 localhost kernel: dvb-usb: found a 'Leadtek Winfast DTV
Dongle (STK7700P based)' in warm state.
Mar 30 11:54:48 localhost kernel: dvb-usb: will pass the complete MPEG2
transport stream to the software demuxer.
Mar 30 11:54:48 localhost kernel: DVB: registering new adapter (Leadtek
Winfast DTV Dongle (STK7700P based))
Mar 30 11:54:48 localhost kernel: DVB: registering frontend 0 (DiBcom
7000PC)...
Mar 30 11:54:48 localhost kernel: MT2060: successfully identified (IF1 =
1220)
Mar 30 11:54:49 localhost kernel: input: IR-receiver inside an USB DVB
receiver as /class/input/input11
Mar 30 11:54:49 localhost kernel: dvb-usb: schedule remote query
interval to 150 msecs.
Mar 30 11:54:49 localhost kernel: dvb-usb: Leadtek Winfast DTV Dongle
(STK7700P based) successfully initialized and connected.
Mar 30 11:54:49 localhost kernel: usbcore: registered new interface
driver dvb_usb_dib0700
Thanks
J
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2008-03-30 1:00 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <e44ae5e0712172128p4e1428aao493d0a1725b6fcd3@mail.gmail.com>
2008-03-28 0:29 ` [linux-dvb] [PATCH] new USB-ID for Leadtek Winfast DTV was: Re: New Leadtek Winfast DTV Dongle working - with mods but no RC Antti Palosaari
2008-03-29 0:31 ` ptay1685
2008-03-29 9:58 ` Antti Palosaari
2008-03-29 21:49 ` Patrick Boettcher
2008-03-29 22:12 ` Antti Palosaari
2008-03-30 1:00 ` J
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox