public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: aldebaran <aldebx@yahoo.fr>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] cx23885 and Xc3028 frontend type (ATSC) is not compatible with requested tuning type (OFDM)
Date: Sat, 05 Apr 2008 16:53:27 +0200	[thread overview]
Message-ID: <47F79267.7060307@yahoo.fr> (raw)


[-- Attachment #1.1: Type: text/plain, Size: 3927 bytes --]

Dear linux-dvb developers,
I own an HP rebranded Hauppauge Express Card shipped with several HP 
laptops.
I know you recently added support for this device, however I cannot 
manage to make it work.
Specifically I cannot use the 'scan' utility to generate a channels.conf 
file usable with me-tv, thus I cannot use the tuner.
I had the same outcomes either with v4l-dvb and patched cx23885 drivers.
Thank you for your support!

here is the output of this tool:

    scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/fr-Paris
    using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
    initial transponder 810000000 0 2 1 3 1 0 0
    initial transponder 730000000 0 2 1 3 1 0 0
    initial transponder 626000000 0 2 1 3 1 0 0
    WARNING: frontend type (ATSC) is not compatible with requested
    tuning type (OFDM)
    WARNING: frontend type (ATSC) is not compatible with requested
    tuning type (OFDM)
    WARNING: frontend type (ATSC) is not compatible with requested
    tuning type (OFDM)
    ERROR: initial tuning failed
    dumping lists (0 services)
    Done.

here are my card specs:
HP Hauppauge WinTv 885
model 77001 rev d4c0 (Model 77xxx Analog/ATSC Hybrid, Xc3028)
tuner: Xceive xc3028 http://www.xceive.com/technology_XC3028.htm
audio tuner: stereo cx23885
decoder: cx23885 http://www.conexant.com/products/entry.jsp?id=393

The card seems correctly recognised, here is my dmesg output:

    [   34.715408] cx23885 driver version 0.0.1 loaded
    [   34.715478] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level,
    low) -> IRQ 17
    [   34.715495] CORE cx23885[0]: subsystem: 0070:7717, board:
    Hauppauge WinTV-HVR1500 [card=6,autodetected]
    [   34.717889] uvcvideo: disagrees about version of symbol video_devdata
    [   34.717891] uvcvideo: Unknown symbol video_devdata
    [   34.718209] uvcvideo: disagrees about version of symbol
    video_unregister_device
    [   34.718211] uvcvideo: Unknown symbol video_unregister_device
    [   34.718311] uvcvideo: disagrees about version of symbol
    video_device_alloc
    [   34.718313] uvcvideo: Unknown symbol video_device_alloc
    [   34.718380] uvcvideo: disagrees about version of symbol
    video_register_device
    [   34.718382] uvcvideo: Unknown symbol video_register_device
    [   34.718581] uvcvideo: disagrees about version of symbol
    video_device_release
    [   34.718582] uvcvideo: Unknown symbol video_device_release
    [   34.814851] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver
    for Linux, 1.2.25
    [   34.814854] iwl4965: Copyright(c) 2003-2007 Intel Corporation
    [   34.826010] cx23885[0]: i2c bus 0 registered
    [   34.826027] cx23885[0]: i2c bus 1 registered
    [   34.826041] cx23885[0]: i2c bus 2 registered
    [   34.853553] tveeprom 0-0050: Hauppauge model 77001, rev D4C0,
    serial #68766589
    [   34.853556] tveeprom 0-0050: MAC address is 00-0D-FE-23-A3-DB
    [   34.853558] tveeprom 0-0050: tuner model is Xceive XC3028 (idx
    120, type 71)
    [   34.853561] tveeprom 0-0050: TV standards NTSC(M) ATSC/DVB
    Digital (eeprom 0x88)
    [   34.853563] tveeprom 0-0050: audio processor is CX23885 (idx 39)
    [   34.853565] tveeprom 0-0050: decoder processor is CX23885 (idx 33)
    [   34.853567] tveeprom 0-0050: has no radio, has no IR receiver,
    has no IR transmitter
    [   34.853569] cx23885[0]: hauppauge eeprom: model=77001
    [   34.853571] cx23885[0]: cx23885 based dvb card
    [   34.980916] xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
    [   34.980921] DVB: registering new adapter (cx23885[0])
    [   34.980924] DVB: registering frontend 0 (Samsung S5H1409 QAM/8VSB
    Frontend)...
    [   34.981111] cx23885_dev_checkrevision() Hardware revision = 0xb0
    [   34.981120] cx23885[0]/0: found at 0000:04:00.0, rev: 2, irq: 17,
    latency: 0, mmio: 0xbc000000
    [   34.981128] PCI: Setting latency timer of device 0000:04:00.0 to 64


[-- Attachment #1.2: Type: text/html, Size: 4641 bytes --]

[-- Attachment #2: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

             reply	other threads:[~2008-04-05 14:54 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-04-05 14:53 aldebaran [this message]
2008-04-05 15:02 ` [linux-dvb] cx23885 and Xc3028 frontend type (ATSC) is not compatible with requested tuning type (OFDM) Michael Krufky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=47F79267.7060307@yahoo.fr \
    --to=aldebx@yahoo.fr \
    --cc=linux-dvb@linuxtv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox