Hi, Christoph

Christoph Honermann schrieb:
  

Hi, Hartmund

I have tested the following archives with my MD8800 und the DVB-S Card.

v4l-dvb-912856e2a0ce.tar.bz2 --> The DVB-S Input 1 works.
The module of the following archives are loaded with the option
"use_frontend=1,1" at the Shell or automatically:
    /etc/modprobe.d/saa7134-dvb   with the following line
   "options saa7134-dvb use_frontend=1,1"
v4l-dvb-1e295a94038e.tar.bz2;

    FATAL: Error inserting saa7134_dvb
    (/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7134/saa7134-dvb.ko):
    Unknown symbol in module, or unknown parameter (see dmesg)

    saa7134_dvb: disagrees about version of symbol saa7134_ts_register
    saa7134_dvb: Unknown symbol saa7134_ts_register
    saa7134_dvb: Unknown symbol videobuf_queue_sg_init
    saa7134_dvb: disagrees about version of symbol saa7134_set_gpio
    saa7134_dvb: Unknown symbol saa7134_set_gpio
    saa7134_dvb: disagrees about version of symbol saa7134_i2c_call_client
    saa7134_dvb: Unknown symbol saa7134_i2c_call_clients
    saa7134_dvb: disagrees about version of symbol saa7134_ts_unregister
    saa7134_dvb: Unknown symbol saa7134_ts_unregister


v4l-dvb-f98d28c21389.tar.bz2  and v4l-dvb-a06ac2bdeb3c.tar.bz2 -->

    FATAL: Error inserting saa7134_dvb
    (/lib/modules/2.6.22-14-generic/kernel/drivers/media/video/saa7134/saa7134-dvb.ko):
    Unknown symbol in module, or unknown parameter (see dmesg)

    dmesg | grep saa7134
    saa7134_dvb: Unknown symbol saa7134_tuner_callback
    saa7134_dvb: disagrees about version of symbol saa7134_ts_register
    saa7134_dvb: Unknown symbol saa7134_ts_register
    saa7134_dvb: Unknown symbol videobuf_queue_sg_init
    saa7134_dvb: disagrees about version of symbol saa7134_set_gpio
    saa7134_dvb: Unknown symbol saa7134_set_gpio

The Hardware ist working with Windows XP with both Input channels.

    

This occurs when you mix modules of different driver versions. You need to
replace all modules of the v4l-dvb subsystem.
So after you compiled and installed with
  make; make install
you need to unload all modules of the subsystem either with
  make rmmod
or reboot.
Afterwards, you can unload and reload a single module as you tried to do.

Hartmut