From: Antti Palosaari <crope@iki.fi>
To: Julien Rebetez <julien@fhtagn.net>
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] Yuan EC372S no frontend
Date: Tue, 08 Apr 2008 02:25:23 +0300 [thread overview]
Message-ID: <47FAAD63.80505@iki.fi> (raw)
In-Reply-To: <1207588024.14924.12.camel@silver-laptop>
[-- Attachment #1: Type: text/plain, Size: 627 bytes --]
Julien Rebetez wrote:
> Hello,
>
> I have some problems with a Yuan EC372S card. I am using the latest (rev
> 7499:1abbd650fe07) v4l-dvb from mercurial head.
>
> The card is correctly detected and the firmware loaded but no frontend
> is attached to it.
I just tested current master and it worked for me. Anyhow, tuning still
gives only filter timeouts (as earlier).
>
> I'm running kernel 2.6.22-14-generic on an Ubuntu Gutsy.
>
> I have attached the relevant output of dmesg and lsusb -v and of course
> I'll be glad to give more informations if needed.
>
> Regards,
> Julien
regards
Antti
--
http://palosaari.fi/
[-- Attachment #2: yuan_insert_log.txt --]
[-- Type: text/plain, Size: 1697 bytes --]
Apr 8 02:22:12 crope-laptop kernel: [ 910.108121] dib0700: loaded with support for 7 different device-types
Apr 8 02:22:12 crope-laptop kernel: [ 910.108154] usbcore: registered new interface driver dvb_usb_dib0700
Apr 8 02:22:20 crope-laptop kernel: [ 914.330737] usb 1-8: new high speed USB device using ehci_hcd and address 23
Apr 8 02:22:20 crope-laptop kernel: [ 914.382207] usb 1-8: configuration #1 chosen from 1 choice
Apr 8 02:22:20 crope-laptop kernel: [ 914.387576] FW GET_VERSION length: -32
Apr 8 02:22:20 crope-laptop kernel: [ 914.387581] cold: 1
Apr 8 02:22:20 crope-laptop kernel: [ 914.387583] dvb-usb: found a 'Yuan EC372S' in cold state, will try to load a firmware
Apr 8 02:22:20 crope-laptop kernel: [ 914.389666] dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
Apr 8 02:22:21 crope-laptop kernel: [ 914.474369] dib0700: firmware started successfully.
Apr 8 02:22:21 crope-laptop kernel: [ 914.759587] dvb-usb: found a 'Yuan EC372S' in warm state.
Apr 8 02:22:21 crope-laptop kernel: [ 914.759645] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
Apr 8 02:22:21 crope-laptop kernel: [ 914.759808] DVB: registering new adapter (Yuan EC372S)
Apr 8 02:22:21 crope-laptop kernel: [ 914.811947] ep 0 read error (status = -32)
Apr 8 02:22:21 crope-laptop kernel: [ 914.811955] I2C read failed on address 40
Apr 8 02:22:21 crope-laptop kernel: [ 914.980331] DVB: registering frontend 0 (DiBcom 7000PC)...
Apr 8 02:22:21 crope-laptop kernel: [ 914.984082] MT2266: successfully identified
Apr 8 02:22:21 crope-laptop kernel: [ 915.150087] dvb-usb: Yuan EC372S successfully initialized and connected.
[-- Attachment #3: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
prev parent reply other threads:[~2008-04-07 23:26 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-07 17:07 [linux-dvb] Yuan EC372S no frontend Julien Rebetez
2008-04-07 21:14 ` Albert Comerma
2008-04-07 23:25 ` Antti Palosaari [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=47FAAD63.80505@iki.fi \
--to=crope@iki.fi \
--cc=julien@fhtagn.net \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox