From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Message-ID: <47FF6971.70601@linuxtv.org> Date: Fri, 11 Apr 2008 09:36:49 -0400 From: Michael Krufky MIME-Version: 1.0 To: Steven Toth References: <47FF216F.6040207@anevia.com> <47FF67FA.80902@linuxtv.org> In-Reply-To: <47FF67FA.80902@linuxtv.org> Cc: linux-dvb@linuxtv.org Subject: Re: [linux-dvb] MPEG2TS and HVR-1300 List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: Steven Toth wrote: > Frederic CAND wrote: >> Hi all, >> >> we have here at our office an Hauppauge HVR 1300. It's working under >> Linux 2.6.24 but we've not been able to make MPEG2/TS work. MPEG2/PS is >> working fine though. >> >> From what I read, it looks like the Conexant CX23416 chipset should >> supports Transport Stream but we've not been able to use it. Are we >> missing something ? > > Last I heard transport mode was disabled in the firmware sometime ago by > Conexant, in favor of some other feature being enabled. > > If you can find really early firmware for the PVR150 then you might try > that. (Circa 3-4 years ago). > Please note: if you do find the older firmware, you will have to patch cx88-blackbird.c to allow firmware size 262144. If this works for you, please post your results. Regards, Mike _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb