From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Message-ID: <47FF6E6C.70008@anevia.com> Date: Fri, 11 Apr 2008 15:58:04 +0200 From: Frederic CAND MIME-Version: 1.0 To: Michael Krufky References: <47FF216F.6040207@anevia.com> <47FF67FA.80902@linuxtv.org> <47FF6971.70601@linuxtv.org> In-Reply-To: <47FF6971.70601@linuxtv.org> Cc: linux-dvb@linuxtv.org Subject: Re: [linux-dvb] MPEG2TS and HVR-1300 List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: Michael Krufky a =E9crit : > Steven Toth wrote: >> Frederic CAND wrote: >>> Hi all, >>> >>> we have here at our office an Hauppauge HVR 1300. It's working under = >>> Linux 2.6.24 but we've not been able to make MPEG2/TS work. MPEG2/PS is = >>> working fine though. >>> >>> From what I read, it looks like the Conexant CX23416 chipset should = >>> supports Transport Stream but we've not been able to use it. Are we = >>> missing something ? >> Last I heard transport mode was disabled in the firmware sometime ago by = >> Conexant, in favor of some other feature being enabled. >> >> If you can find really early firmware for the PVR150 then you might try = >> that. (Circa 3-4 years ago). >> > = > Please note: if you do find the older firmware, you will have to patch c= x88-blackbird.c to allow firmware size 262144. > = > If this works for you, please post your results. > = > Regards, > = > Mike > = Sure, I will. Regards. -- = CAND Frederic Product Manager ANEVIA _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb