* [linux-dvb] tda10086: Testers wanted
@ 2008-04-14 23:32 Hartmut Hackmann
2008-04-20 23:32 ` Oliver Endriss
0 siblings, 1 reply; 3+ messages in thread
From: Hartmut Hackmann @ 2008-04-14 23:32 UTC (permalink / raw)
To: LInux DVB, Oliver Endriss
Hi, folks
In my personal repository at
http://linuxtv.org/hg/~hhackmann/v4l-dvb/
there are 2 changes that affect all DVB-S cards with tda10086
- The reference frequency (crystal) of the tda10086 now is an option
of the tda10086_config struct. This is necessary i.e. for cards with the
SD1878 tuner.
I adapted the driver for these boards:
- TT Budget-S-1401
- Pinnacle 400e / Technotrend USB
- Lifeview Flydvb Trio
- Medion MD8800
- Lifeview Flydvbs LR300
- Philips Snake
- MD7134 (Bridge 2 - works now)
- The bandwidth of the tda826x baseband filter is now set according to the
expected symbol rate. The boards with this tuner now should work with
transponders providing a higher symbol rate than usual.
This patch was provided by Oliver Endriss.
I tried to make the changes backward compatibe but since i can't test these
cards, i need your feedback.
Oliver: there was no signature in your patch. But of corse i mentioned you
in the log. I hope that's ok for you.
Have fun
Hartmut
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [linux-dvb] tda10086: Testers wanted
2008-04-14 23:32 [linux-dvb] tda10086: Testers wanted Hartmut Hackmann
@ 2008-04-20 23:32 ` Oliver Endriss
2008-04-21 0:30 ` hermann pitton
0 siblings, 1 reply; 3+ messages in thread
From: Oliver Endriss @ 2008-04-20 23:32 UTC (permalink / raw)
To: Hartmut Hackmann; +Cc: LInux DVB
Hartmut Hackmann wrote:
> Hi, folks
>
> In my personal repository at
> http://linuxtv.org/hg/~hhackmann/v4l-dvb/
> there are 2 changes that affect all DVB-S cards with tda10086
> - The reference frequency (crystal) of the tda10086 now is an option
> of the tda10086_config struct. This is necessary i.e. for cards with the
> SD1878 tuner.
> I adapted the driver for these boards:
> - TT Budget-S-1401
> - Pinnacle 400e / Technotrend USB
> - Lifeview Flydvb Trio
> - Medion MD8800
> - Lifeview Flydvbs LR300
> - Philips Snake
> - MD7134 (Bridge 2 - works now)
>
> - The bandwidth of the tda826x baseband filter is now set according to the
> expected symbol rate. The boards with this tuner now should work with
> transponders providing a higher symbol rate than usual.
> This patch was provided by Oliver Endriss.
>
> I tried to make the changes backward compatibe but since i can't test these
> cards, i need your feedback.
Sorry, I have no hardware to test your patches.
> Oliver: there was no signature in your patch. But of corse i mentioned you
> in the log. I hope that's ok for you.
I don't care, but beware that the lawyers @LKML might send you to jail.
:D
CU
Oliver
--
----------------------------------------------------------------
VDR Remote Plugin 0.4.0: http://www.escape-edv.de/endriss/vdr/
----------------------------------------------------------------
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [linux-dvb] tda10086: Testers wanted
2008-04-20 23:32 ` Oliver Endriss
@ 2008-04-21 0:30 ` hermann pitton
0 siblings, 0 replies; 3+ messages in thread
From: hermann pitton @ 2008-04-21 0:30 UTC (permalink / raw)
To: linux-dvb; +Cc: Hartmut Hackmann
Am Montag, den 21.04.2008, 01:32 +0200 schrieb Oliver Endriss:
> Hartmut Hackmann wrote:
> > Hi, folks
> >
> > In my personal repository at
> > http://linuxtv.org/hg/~hhackmann/v4l-dvb/
> > there are 2 changes that affect all DVB-S cards with tda10086
> > - The reference frequency (crystal) of the tda10086 now is an option
> > of the tda10086_config struct. This is necessary i.e. for cards with the
> > SD1878 tuner.
> > I adapted the driver for these boards:
> > - TT Budget-S-1401
> > - Pinnacle 400e / Technotrend USB
> > - Lifeview Flydvb Trio
> > - Medion MD8800
> > - Lifeview Flydvbs LR300
> > - Philips Snake
> > - MD7134 (Bridge 2 - works now)
> >
> > - The bandwidth of the tda826x baseband filter is now set according to the
> > expected symbol rate. The boards with this tuner now should work with
> > transponders providing a higher symbol rate than usual.
> > This patch was provided by Oliver Endriss.
> >
> > I tried to make the changes backward compatibe but since i can't test these
> > cards, i need your feedback.
>
> Sorry, I have no hardware to test your patches.
>
> > Oliver: there was no signature in your patch. But of corse i mentioned you
> > in the log. I hope that's ok for you.
>
> I don't care, but beware that the lawyers @LKML might send you to jail.
> :D
>
> CU
> Oliver
>
Hi,
they won't, since we will take all away from them they seem to have :)
Seriously, Oliver, I have tested your patch previously and the highest
symbol rate is even only 28000 at the Hotbird crowd, so for me no
difference.
Hartmut, didn't care for the clock, _very_ unlikely a problem,
but if you prefer to have it tested explicitly, I come back with some
report.
Cheers,
Hermann
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-04-21 0:30 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-04-14 23:32 [linux-dvb] tda10086: Testers wanted Hartmut Hackmann
2008-04-20 23:32 ` Oliver Endriss
2008-04-21 0:30 ` hermann pitton
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox