From: Marko Ristola <marko.ristola@kolumbus.fi>
To: bas@kompasmedia.nl
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] Mantis 2033: tuning still fails
Date: Thu, 17 Apr 2008 23:11:24 +0300 [thread overview]
Message-ID: <4807AEEC.5040104@kolumbus.fi> (raw)
In-Reply-To: <da94aba5e3e1f0c3c823a33d94b32f9b@localhost>
Hi,
You could first try to use nonencrypted channels only by removing the CA,
to verify that it works without the CA.
Twinhan 2033 works for me wit jusst.de sources, although I haven't
tested the latest revision.
There exists remote control code also for 2033 although it hasn't been
applied into jusst.de.
Regards,
Marko Ristola
Bas v.d. Wiel wrote:
> Hello all,
> Slowly my Twinhan card is coming to life. Sadly though, tuning fails on all
> frequencies. I saw a post on this subject from a few weeks ago. Changing
> the tuner from tda10021 to tda10023 helped a lot in that case, but I have
> absolutely no idea how to do this. I looked over a lot of source code to
> see if I could find where the tuner chip gets determined, but to no avail.
> My C skills aren't good enough I fear.. The output of dmesg shows this:
>
> ACPI: PCI interrupt for device 0000:01:09.0 disabled
> ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [APC2] -> GSI 17 (level, low)
> -> IRQ 20
> irq: 20, latency: 32
> memory: 0xfdeff000, mmio: 0xde8c4000
> found a VP-2033 PCI DVB-C device on (01:09.0),
> Mantis Rev 1 [1822:0008], irq: 20, latency: 32
> memory: 0xfdeff000, mmio: 0xde8c4000
> MAC Address=[00:08:ca:1b:e8:b8]
> mantis_alloc_buffers (0): DMA=0x1d700000 cpu=0xdd700000 size=65536
> mantis_alloc_buffers (0): RISC=0x1cd56000 cpu=0xdcd56000 size=1000
> DVB: registering new adapter (Mantis dvb adapter)
> mantis_frontend_init (0): Probing for CU1216 (DVB-C)
> TDA10021: i2c-addr = 0x0c, id = 0x7d
> mantis_frontend_init (0): found Philips CU1216 DVB-C frontend (TDA10021) @
> 0x0c
> mantis_frontend_init (0): Mantis DVB-C Philips CU1216 frontend attach
> success
> DVB: registering frontend 0 (Philips TDA10021 DVB-C)...
> CA: Registering Mantis Adapter(0) Slot(0)
>
> Any help would be greatly appreciated!
>
> Bas
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
>
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
prev parent reply other threads:[~2008-04-17 20:11 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-14 9:06 [linux-dvb] Mantis 2033: tuning still fails Bas v.d. Wiel
2008-04-17 20:11 ` Marko Ristola [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4807AEEC.5040104@kolumbus.fi \
--to=marko.ristola@kolumbus.fi \
--cc=bas@kompasmedia.nl \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox