From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mx3.redhat.com (mx3.redhat.com [172.16.48.32]) by int-mx1.corp.redhat.com (8.13.1/8.13.1) with ESMTP id m3OIiXqd024585 for ; Thu, 24 Apr 2008 14:44:33 -0400 Received: from mail.hauppauge.com (mail.hauppauge.com [167.206.143.4]) by mx3.redhat.com (8.13.8/8.13.8) with ESMTP id m3OIiEv4025959 for ; Thu, 24 Apr 2008 14:44:15 -0400 Message-ID: <4810D4EA.409@linuxtv.org> From: mkrufky@linuxtv.org To: greg@kroah.com Date: Thu, 24 Apr 2008 14:43:54 -0400 MIME-Version: 1.0 in-reply-to: <20080424182147.GA28661@kroah.com> Content-Type: multipart/mixed; boundary="----_=_NextPart_000_01C8A63A.BE3C5C80" Cc: video4linux-list@redhat.com, kristen.c.accardi@intel.com Subject: Re: [BUG] HVR-1500 Hot swap causes lockup List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: video4linux-list-bounces@redhat.com Errors-To: video4linux-list-bounces@redhat.com List-ID: This message is in MIME format. Since your mail reader does not understand this format, some or all of this message may not be legible. ------_=_NextPart_000_01C8A63A.BE3C5C80 Content-Type: text/plain; charset="iso-8859-1" Greg KH wrote: > On Thu, Apr 24, 2008 at 02:10:47PM -0400, mkrufky@linuxtv.org wrote: > >> Greg KH wrote: >> >>> On Thu, Apr 24, 2008 at 10:40:24AM -0400, Michael Krufky wrote: >>> >>> >>>> On Thu, Apr 24, 2008 at 10:32 AM, Jon Lowe wrote: >>>> >>>> >>>>> While not exactly the same, this bug MAY be related to my hot swap >>>>> >> poblem: >> >> https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.15/+bug/12519 >> >>>>> >>>>> >>>> No relation. Also, we're in 2.6.26 development, most 2.6.15 bugs are >>>> entirely irrelevant. >>>> >>>> The problem is PCIe hotplugging -- it doesn't work in Linux, at >>>> least, not with Expresscards. This issue is not specific to the >>>> HVR1500 -- you'll see it on other similar Expresscards as well. >>>> >>>> >>> Huh? We had expresscard hotplugging working in Linux before any other >>> operating system ever did. It works for me just fine here on many >>> machines, and does so for many thousands of users. >>> >>> >>> >>>> I can only get the HVR1500 / HVR1500Q / HVR1400 to come up properly if >>>> it is installed in the system when I boot up the PC. Inserting it >>>> after boot does absolutely nothing, and removing it after you booted >>>> the system with it installed will leave the system unstable. >>>> >>>> >>> Have you actually loaded the pci hotplug controller driver that is >>> needed to get hotplugging of express cards to work properly? :) >>> >>> >> This is what I see upon insertion of an HVR1500 with pciehp loaded: >> >> [ 122.798217] pciehp: HPC vendor_id 8086 device_id 2a01 ss_vid 0 ss_did 0 >> [ 122.798457] Evaluate _OSC Set fails. Status = 0x0005 >> [ 122.798492] Evaluate _OSC Set fails. Status = 0x0005 >> [ 122.798514] pciehp: Cannot get control of hotplug hardware for pci 0000:00:01.0 >> [ 122.798662] pciehp: HPC vendor_id 8086 device_id 283f ss_vid 0 ss_did 0 >> [ 122.798705] Evaluate _OSC Set fails. Status = 0x0005 >> [ 122.798735] Evaluate _OSC Set fails. Status = 0x0005 >> [ 122.798758] pciehp: Cannot get control of hotplug hardware for pci 0000:00:1c.0 >> > > This really looks like your BIOS does not support PCI Hotplug of your > express cards. > > But I'm adding Kristen to the CC: as she is the PCI Hotplug maintainer > of the kernel, and she knows this way better than I do. > > Also, have you tried the acpiphp driver? That might be the one your > hardware needs instead. > > thanks, > > greg k-h > acpiphp gives me the following: [ 264.251609] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 264.282563] acpiphp_glue: can't get bus number, assuming 0 [ 264.282729] decode_hpp: Could not get hotplug parameters. Use defaults [ 264.282783] acpiphp: Slot [1] registered [ 265.125349] cx23885 driver version 0.0.1 loaded I loaded the cx23885 driver, but it did not pick up on the hardware, nor do I see the expresscard listed in lspci. The BIOS on my laptop definitely does support hotplug of my expresscards. It works in Windows Vista (yuck) To get a better idea about my Dell Latitude D830 laptop configuration, I've included full dmesg dump (please see attached) Thank you for looking into this. Regards, Mike ------_=_NextPart_000_01C8A63A.BE3C5C80 Content-Type: text/plain; name="dmesg.txt" Content-Transfer-Encoding: quoted-printable Content-Disposition: attachment; filename="dmesg.txt" [ 0.000000] Linux version 2.6.22-14-generic (buildd@king) (gcc = version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP = Tue Feb 12 02:46:46 UTC 2008 (Ubuntu 2.6.22-14.52-generic) [ 0.000000] Command line: = root=3DUUID=3D7e14049f-e649-4bf3-a0ac-19849626e313 ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 = (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fe80400 (usable) [ 0.000000] BIOS-e820: 000000007fe80400 - 0000000080000000 = (reserved) [ 0.000000] BIOS-e820: 00000000f4000000 - 00000000f8000000 = (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 = (reserved) [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1c000 = (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000fed90000 = (reserved) [ 0.000000] BIOS-e820: 00000000feda0000 - 00000000feda6000 = (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee10000 = (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 = (reserved) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 = used [ 0.000000] Entering add_active_range(0, 256, 523904) 1 entries of = 3200 used [ 0.000000] end_pfn_map =3D 1048576 [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xFFFF8100000FBB00 checksum 0 [ 0.000000] ACPI: RSDP 000FBB00, 0024 (r2 DELL ) [ 0.000000] ACPI: XSDT 7FE81E00, 0064 (r1 DELL M08 27D70607 = ASL 61) [ 0.000000] ACPI: FACP 7FE81C9C, 00F4 (r4 DELL M08 27D70607 = ASL 61) [ 0.000000] ACPI: DSDT 7FE82400, 63C0 (r2 INT430 SYSFexxx 1001 = INTL 20050624) [ 0.000000] ACPI: FACS 7FE90C00, 0040 [ 0.000000] ACPI: HPET 7FE81F00, 0038 (r1 DELL M08 1 = ASL 61) [ 0.000000] ACPI: APIC 7FE82000, 0068 (r1 DELL M08 27D70607 = ASL 47) [ 0.000000] ACPI: ASF! 7FE81C00, 007E (r32 DELL M08 27D70607 = ASL 61) [ 0.000000] ACPI: MCFG 7FE81FC0, 003E (r16 DELL M08 27D70607 = ASL 61) [ 0.000000] ACPI: SLIC 7FE8209C, 0176 (r1 DELL M08 27D70607 = ASL 61) [ 0.000000] ACPI: TCPA 7FE82300, 0032 (r1 0 = ASL 0) [ 0.000000] ACPI: SSDT 7FE806EF, 04CC (r1 PmRef CpuPm 3000 = INTL 20050624) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000007fe80000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 = used [ 0.000000] Entering add_active_range(0, 256, 523904) 1 entries of = 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000007fe80000 [ 0.000000] No mptable found. [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1048576 [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 523904 [ 0.000000] On node 0 totalpages: 523807 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 1125 pages reserved [ 0.000000] DMA zone: 2818 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 7106 pages used for memmap [ 0.000000] DMA32 zone: 512702 pages, LIFO batch:31 [ 0.000000] Normal zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 (Bootup-CPU) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high = level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] swsusp: Registered nosave memory region: = 000000000009f000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: = 00000000000a0000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 88000000 (gap: = 80000000:74000000) [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 34696 bytes of per cpu data [ 0.000000] Built 1 zonelists. Total pages: 515520 [ 0.000000] Kernel command line: = root=3DUUID=3D7e14049f-e649-4bf3-a0ac-19849626e313 ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] Extended CMOS year: 2000 [ 17.924002] time.c: Detected 1995.001 MHz processor. [ 17.926557] Console: colour VGA+ 80x25 [ 17.926574] Checking aperture... [ 17.926586] Calgary: detecting Calgary via BIOS EBDA area [ 17.926588] Calgary: Unable to locate Rio Grande table in EBDA - = bailing! [ 17.946403] Memory: 2054676k/2095616k available (2274k kernel code, = 40552k reserved, 1185k data, 296k init) [ 17.946445] SLUB: Genslabs=3D23, HWalign=3D64, Order=3D0-1, = MinObjects=3D4, CPUs=3D2, Nodes=3D1 [ 18.025820] Calibrating delay using timer specific routine.. 3994.55 = BogoMIPS (lpj=3D7989109) [ 18.025850] Security Framework v1.0.0 initialized [ 18.025857] SELinux: Disabled at boot. [ 18.026054] Dentry cache hash table entries: 262144 (order: 9, = 2097152 bytes) [ 18.027279] Inode-cache hash table entries: 131072 (order: 8, = 1048576 bytes) [ 18.027864] Mount-cache hash table entries: 256 [ 18.027994] CPU: L1 I cache: 32K, L1 D cache: 32K [ 18.027998] CPU: L2 cache: 4096K [ 18.028000] CPU 0/0 -> Node 0 [ 18.028002] using mwait in idle threads. [ 18.028004] CPU: Physical Processor ID: 0 [ 18.028005] CPU: Processor Core ID: 0 [ 18.028011] CPU0: Thermal monitoring enabled (TM2) [ 18.028021] SMP alternatives: switching to UP code [ 18.028271] Early unpacking initramfs... done [ 18.359216] ACPI: Core revision 20070126 [ 18.359259] ACPI: Looking for DSDT in initramfs... error, file = /DSDT.aml not found. [ 18.404648] Using local APIC timer interrupts. [ 18.454749] result 12468753 [ 18.454750] Detected 12.468 MHz APIC timer. [ 18.457629] SMP alternatives: switching to SMP code [ 18.457706] Booting processor 1/2 APIC 0x1 [ 18.468205] Initializing CPU#1 [ 18.545528] Calibrating delay using timer specific routine.. 3990.08 = BogoMIPS (lpj=3D7980171) [ 18.545534] CPU: L1 I cache: 32K, L1 D cache: 32K [ 18.545536] CPU: L2 cache: 4096K [ 18.545538] CPU 1/1 -> Node 0 [ 18.545540] CPU: Physical Processor ID: 0 [ 18.545541] CPU: Processor Core ID: 1 [ 18.545547] CPU1: Thermal monitoring enabled (TM2) [ 18.546038] Intel(R) Core(TM)2 Duo CPU T7300 @ 2.00GHz stepping = 0a [ 18.546125] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 18.569527] Brought up 2 CPUs [ 18.644019] migration_cost=3D11 [ 18.644180] NET: Registered protocol family 16 [ 18.644252] ACPI: bus type pci registered [ 18.644259] PCI: Using configuration type 1 [ 18.651112] ACPI: EC: Look up EC in DSDT [ 18.712285] ACPI: SSDT 7FE90C80, 0043 (r1 LMPWR DELLLOM 1001 = INTL 20050624) [ 18.712452] ACPI: Interpreter enabled [ 18.712455] ACPI: (supports S0 S3 S4 S5) [ 18.712470] ACPI: Using IOAPIC for interrupt routing [ 18.757163] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 18.757173] PCI: Probing PCI hardware (bus 00) [ 18.759216] PCI: Transparent bridge - 0000:00:1e.0 [ 18.759374] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 18.759844] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT] [ 18.760010] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 18.760107] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 18.760228] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 18.760347] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT] [ 18.760465] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT] [ 18.777109] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 11) *5 [ 18.777218] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10 [ 18.777313] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *0, = disabled. [ 18.777445] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3 [ 18.777553] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 = 12 14 15) [ 18.777661] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 = 12 14 15) [ 18.777768] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 = 12 14 15) [ 18.777865] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 = 12 14 15) *0, disabled. [ 18.777972] Linux Plug and Play Support v0.97 (c) Adam Belay [ 18.777982] pnp: PnP ACPI init [ 18.777990] ACPI: bus type pnp registered [ 18.836418] pnp: PnP ACPI: found 14 devices [ 18.836420] ACPI: ACPI bus type pnp unregistered [ 18.836462] PCI: Using ACPI for IRQ routing [ 18.836464] PCI: If a device doesn't work, try "pci=3Drouteirq". If = it helps, post a report [ 18.836614] NET: Registered protocol family 8 [ 18.836616] NET: Registered protocol family 20 [ 18.836630] PCI-GART: No AMD northbridge found. [ 18.836636] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 18.836640] hpet0: 3 64-bit timers, 14318180 Hz [ 18.837685] pnp: 00:05: ioport range 0xc80-0xcaf has been reserved [ 18.837688] pnp: 00:05: ioport range 0xcc0-0xcff could not be = reserved [ 18.837693] pnp: 00:08: iomem range 0xfed00000-0xfed003ff has been = reserved [ 18.837698] pnp: 00:0a: ioport range 0xcb0-0xcbb has been reserved [ 18.837701] pnp: 00:0a: iomem range 0xfed40000-0xfed44fff could not = be reserved [ 18.837707] pnp: 00:0b: ioport range 0x900-0x97f has been reserved [ 18.837709] pnp: 00:0b: ioport range 0x4d0-0x4d1 has been reserved [ 18.837712] pnp: 00:0b: ioport range 0x1000-0x1005 has been reserved [ 18.837714] pnp: 00:0b: ioport range 0x1008-0x100f has been reserved [ 18.837718] pnp: 00:0c: ioport range 0xf400-0xf4fe has been reserved [ 18.837721] pnp: 00:0c: ioport range 0x1006-0x1007 has been reserved [ 18.837723] pnp: 00:0c: ioport range 0x100a-0x1059 could not be = reserved [ 18.837726] pnp: 00:0c: ioport range 0x1060-0x107f has been reserved [ 18.837728] pnp: 00:0c: ioport range 0x1080-0x10bf has been reserved [ 18.837731] pnp: 00:0c: ioport range 0x10c0-0x10df has been reserved [ 18.837733] pnp: 00:0c: ioport range 0x1010-0x102f has been reserved [ 18.837737] pnp: 00:0d: iomem range 0x0-0x9efff could not be = reserved [ 18.837740] pnp: 00:0d: iomem range 0x9f000-0x9ffff could not be = reserved [ 18.837742] pnp: 00:0d: iomem range 0xc0000-0xcffff has been = reserved [ 18.837745] pnp: 00:0d: iomem range 0xe0000-0xfffff has been = reserved [ 18.838003] PCI: Bridge: 0000:00:01.0 [ 18.838006] IO window: e000-efff [ 18.838010] MEM window: fa000000-feafffff [ 18.838013] PREFETCH window: e0000000-efffffff [ 18.838016] PCI: Bridge: 0000:00:1c.0 [ 18.838017] IO window: disabled. [ 18.838023] MEM window: disabled. [ 18.838027] PREFETCH window: disabled. [ 18.838033] PCI: Bridge: 0000:00:1c.1 [ 18.838034] IO window: disabled. [ 18.838040] MEM window: f9f00000-f9ffffff [ 18.838044] PREFETCH window: disabled. [ 18.838050] PCI: Bridge: 0000:00:1c.3 [ 18.838053] IO window: d000-dfff [ 18.838059] MEM window: f9c00000-f9efffff [ 18.838064] PREFETCH window: f0000000-f01fffff [ 18.838069] PCI: Bridge: 0000:00:1c.5 [ 18.838071] IO window: disabled. [ 18.838077] MEM window: f9b00000-f9bfffff [ 18.838081] PREFETCH window: disabled. [ 18.838093] PCI: Bus 4, cardbus bridge: 0000:03:01.0 [ 18.838094] IO window: 00002000-000020ff [ 18.838099] IO window: 00002400-000024ff [ 18.838104] PREFETCH window: 88000000-8bffffff [ 18.838110] MEM window: 8c000000-8fffffff [ 18.838115] PCI: Bridge: 0000:00:1e.0 [ 18.838118] IO window: 2000-2fff [ 18.838124] MEM window: f9a00000-f9afffff [ 18.838128] PREFETCH window: 88000000-8bffffff [ 18.838143] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, = low) -> IRQ 16 [ 18.838148] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 18.838170] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, = low) -> IRQ 16 [ 18.838176] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 18.838199] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, = low) -> IRQ 17 [ 18.838205] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 18.838228] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, = low) -> IRQ 19 [ 18.838234] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 18.838256] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, = low) -> IRQ 17 [ 18.838262] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 18.838276] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 18.838293] PCI: Enabling device 0000:03:01.0 (0000 -> 0003) [ 18.838296] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, = low) -> IRQ 19 [ 18.838311] NET: Registered protocol family 2 [ 18.841367] Time: tsc clocksource has been installed. [ 18.877411] IP route cache hash table entries: 65536 (order: 7, = 524288 bytes) [ 18.878072] TCP established hash table entries: 262144 (order: 10, = 6291456 bytes) [ 18.880647] TCP bind hash table entries: 65536 (order: 8, 1048576 = bytes) [ 18.881207] TCP: Hash tables configured (established 262144 bind = 65536) [ 18.881209] TCP reno registered [ 18.893477] checking if image is initramfs... it is [ 19.546316] Freeing initrd memory: 7199k freed [ 19.549865] audit: initializing netlink socket (disabled) [ 19.549884] audit(1209045280.568:1): initialized [ 19.551651] VFS: Disk quotas dquot_6.5.1 [ 19.551695] Dquot-cache hash table entries: 512 (order 0, 4096 = bytes) [ 19.551773] io scheduler noop registered [ 19.551775] io scheduler anticipatory registered [ 19.551777] io scheduler deadline registered [ 19.551856] io scheduler cfq registered (default) [ 19.555700] Boot video device is 0000:01:00.0 [ 19.555820] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 19.555853] assign_interrupt_mode Found MSI capability [ 19.555856] Allocate Port Service[0000:00:01.0:pcie00] [ 19.555888] Allocate Port Service[0000:00:01.0:pcie02] [ 19.555957] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 19.556015] assign_interrupt_mode Found MSI capability [ 19.556017] Allocate Port Service[0000:00:1c.0:pcie00] [ 19.556041] Allocate Port Service[0000:00:1c.0:pcie02] [ 19.556134] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 19.556192] assign_interrupt_mode Found MSI capability [ 19.556193] Allocate Port Service[0000:00:1c.1:pcie00] [ 19.556220] Allocate Port Service[0000:00:1c.1:pcie02] [ 19.556313] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 19.556371] assign_interrupt_mode Found MSI capability [ 19.556373] Allocate Port Service[0000:00:1c.3:pcie00] [ 19.556399] Allocate Port Service[0000:00:1c.3:pcie02] [ 19.556494] PCI: Setting latency timer of device 0000:00:1c.5 to 64 [ 19.556552] assign_interrupt_mode Found MSI capability [ 19.556554] Allocate Port Service[0000:00:1c.5:pcie00] [ 19.556581] Allocate Port Service[0000:00:1c.5:pcie02] [ 19.573980] Real Time Clock Driver v1.12ac [ 19.574108] hpet_resources: 0xfed00000 is busy [ 19.574163] Linux agpgart interface v0.102 (c) Dave Jones [ 19.574166] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ = sharing enabled [ 19.574292] serial8250: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A [ 19.574801] 00:09: ttyS0 at I/O 0x3f8 (irq =3D 4) is a 16550A [ 19.575322] RAMDISK driver initialized: 16 RAM disks of 65536K size = 1024 blocksize [ 19.575433] input: Macintosh mouse button emulation as = /class/input/input0 [ 19.575499] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at = 0x60,0x64 irq 1,12 [ 19.578914] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 19.578918] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 19.579056] mice: PS/2 mouse device common for all mice [ 19.579160] TCP cubic registered [ 19.579216] NET: Registered protocol family 1 [ 19.579395] = /build/buildd/linux-source-2.6.22-2.6.22/drivers/rtc/hctosys.c: unable = to open rtc device (rtc0) [ 19.579402] Freeing unused kernel memory: 296k freed [ 19.582462] input: AT Translated Set 2 keyboard as = /class/input/input1 [ 20.729897] AppArmor: AppArmor = initialized<5>audit(1209045281.748:2): type=3D1505 info=3D"AppArmor = initialized" pid=3D1286 [ 20.734084] fuse init (API version 7.8) [ 20.737343] Failure registering capabilities with primary security = module. [ 20.773735] ACPI: SSDT 7FE810F6, 0286 (r1 PmRef Cpu0Ist 3000 = INTL 20050624) [ 20.773929] ACPI: SSDT 7FE80BBB, 04B6 (r1 PmRef Cpu0Cst 3001 = INTL 20050624) [ 20.774179] Monitor-Mwait will be used to enter C-1 state [ 20.774182] Monitor-Mwait will be used to enter C-2 state [ 20.774184] Monitor-Mwait will be used to enter C-3 state [ 20.774187] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 20.774191] ACPI: Processor [CPU0] (supports 8 throttling states) [ 20.774386] ACPI: SSDT 7FE8137C, 00C4 (r1 PmRef Cpu1Ist 3000 = INTL 20050624) [ 20.774564] ACPI: SSDT 7FE81071, 0085 (r1 PmRef Cpu1Cst 3000 = INTL 20050624) [ 20.774854] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 20.774859] ACPI: Processor [CPU1] (supports 8 throttling states) [ 20.776309] Marking TSC unstable due to possible TSC halt in C2 [ 20.776315] Time: hpet clocksource has been installed. [ 20.778809] ACPI: Thermal Zone [THM] (37 C) [ 21.149658] usbcore: registered new interface driver usbfs [ 21.149680] usbcore: registered new interface driver hub [ 21.149702] usbcore: registered new device driver usb [ 21.150297] USB Universal Host Controller Interface driver v3.0 [ 21.150382] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, = low) -> IRQ 20 [ 21.150394] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 21.150398] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 21.150528] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned = bus number 1 [ 21.150561] uhci_hcd 0000:00:1a.0: irq 20, io base 0x00006f20 [ 21.150659] usb usb1: configuration #1 chosen from 1 choice [ 21.150681] hub 1-0:1.0: USB hub found [ 21.150687] hub 1-0:1.0: 2 ports detected [ 21.222662] SCSI subsystem initialized [ 21.226513] libata version 2.21 loaded. [ 21.234551] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, = low) -> IRQ 21 [ 21.234567] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 21.234572] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 21.234600] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned = bus number 2 [ 21.234637] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00006f00 [ 21.234720] usb usb2: configuration #1 chosen from 1 choice [ 21.234741] hub 2-0:1.0: USB hub found [ 21.234746] hub 2-0:1.0: 2 ports detected [ 21.254415] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, = low) -> IRQ 20 [ 21.254428] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 21.254433] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 21.254458] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned = bus number 3 [ 21.254487] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00006f80 [ 21.254578] usb usb3: configuration #1 chosen from 1 choice [ 21.254597] hub 3-0:1.0: USB hub found [ 21.254602] hub 3-0:1.0: 2 ports detected [ 21.274446] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, = low) -> IRQ 21 [ 21.274457] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 21.274462] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 21.274489] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned = bus number 4 [ 21.274518] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00006f60 [ 21.274604] usb usb4: configuration #1 chosen from 1 choice [ 21.274623] hub 4-0:1.0: USB hub found [ 21.274628] hub 4-0:1.0: 2 ports detected [ 21.294624] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, = low) -> IRQ 22 [ 21.294636] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 21.294640] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 21.294666] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned = bus number 5 [ 21.294698] uhci_hcd 0000:00:1d.2: irq 22, io base 0x00006f40 [ 21.294790] usb usb5: configuration #1 chosen from 1 choice [ 21.294809] hub 5-0:1.0: USB hub found [ 21.294813] hub 5-0:1.0: 2 ports detected [ 21.315122] tg3.c:v3.77 (May 31, 2007) [ 21.315145] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, = low) -> IRQ 17 [ 21.315155] PCI: Setting latency timer of device 0000:09:00.0 to 64 [ 21.316236] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, = low) -> IRQ 22 [ 21.317084] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 21.317090] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 21.317136] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned = bus number 6 [ 21.317175] ehci_hcd 0000:00:1a.7: debug port 1 [ 21.317182] PCI: cache line size of 32 is not supported by device = 0000:00:1a.7 [ 21.317191] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xfed1c400 [ 21.321071] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, = driver 10 Dec 2004 [ 21.321159] usb usb6: configuration #1 chosen from 1 choice [ 21.321182] hub 6-0:1.0: USB hub found [ 21.321189] hub 6-0:1.0: 4 ports detected [ 21.334326] eth0: Tigon3 [partno(BCM95755m) rev a002 PHY(5755)] (PCI = Express) 10/100/1000Base-T Ethernet 00:1c:23:97:ba:67 [ 21.334332] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] = WireSpeed[1] TSOcap[1] [ 21.334334] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 21.365007] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, = low) -> IRQ 20 [ 21.366209] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 21.366216] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 21.366263] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned = bus number 7 [ 21.366298] ehci_hcd 0000:00:1d.7: debug port 1 [ 21.366305] PCI: cache line size of 32 is not supported by device = 0000:00:1d.7 [ 21.366312] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfed1c000 [ 21.370210] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, = driver 10 Dec 2004 [ 21.370288] usb usb7: configuration #1 chosen from 1 choice [ 21.370312] hub 7-0:1.0: USB hub found [ 21.370318] hub 7-0:1.0: 6 ports detected [ 21.390872] ACPI: PCI Interrupt 0000:03:01.4[A] -> GSI 19 (level, = low) -> IRQ 19 [ 21.442051] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=3D[19] = MMIO=3D[f9aff000-f9aff7ff] Max Packet=3D[2048] IR/IT contexts=3D[8/8] [ 21.444129] ata_piix 0000:00:1f.1: version 2.11 [ 21.444147] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, = low) -> IRQ 16 [ 21.444179] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 21.444717] scsi0 : ata_piix [ 21.444864] scsi1 : ata_piix [ 21.446651] ata1: PATA max UDMA/100 cmd 0x00000000000101f0 ctl = 0x00000000000103f6 bmdma 0x0000000000016fa0 irq 14 [ 21.446654] ata2: PATA max UDMA/100 cmd 0x0000000000010170 ctl = 0x0000000000010376 bmdma 0x0000000000016fa8 irq 15 [ 21.496955] ata2: port disabled. ignoring. [ 21.497039] ahci 0000:00:1f.2: version 2.2 [ 21.497060] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, = low) -> IRQ 17 [ 21.497935] ahci 0000:00:1f.2: nr_ports (3) and implemented port map = (0x5) don't match [ 21.622928] usb 5-1: new full speed USB device using uhci_hcd and = address 2 [ 21.652503] usb 5-1: configuration #1 chosen from 1 choice [ 21.653781] hub 5-1:1.0: USB hub found [ 21.656714] hub 5-1:1.0: 4 ports detected [ 21.711150] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 = Gbps 0x5 impl SATA mode [ 21.711156] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum = part=20 [ 21.711163] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 21.711295] scsi2 : ahci [ 21.711355] scsi3 : ahci [ 21.711384] scsi4 : ahci [ 21.711624] ata3: SATA max UDMA/133 cmd 0xffffc20000ad4900 ctl = 0x0000000000000000 bmdma 0x0000000000000000 irq 17 [ 21.711627] ata4: DUMMY [ 21.711630] ata5: SATA max UDMA/133 cmd 0xffffc20000ad4a00 ctl = 0x0000000000000000 bmdma 0x0000000000000000 irq 17 [ 21.729538] ieee1394: Host added: ID:BUS[0-00:1023] = GUID[4a4fc00039d5cd81] [ 21.735266] usb 5-2: new full speed USB device using uhci_hcd and = address 3 [ 21.787388] usb 5-2: configuration #1 chosen from 1 choice [ 21.862762] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 21.863658] ata3.00: ATA-8: Hitachi HTS722012K9A300, DCCOC54P, max = UDMA/133 [ 21.863663] ata3.00: 234441648 sectors, multi 8: LBA48 NCQ (depth = 31/32) [ 21.864744] ata3.00: configured for UDMA/133 [ 21.890895] usb 5-1.2: new full speed USB device using uhci_hcd and = address 4 [ 21.949112] usb 5-1.2: configuration #1 chosen from 1 choice [ 21.984711] ata5: SATA link down (SStatus 0 SControl 300) [ 21.984836] scsi 2:0:0:0: Direct-Access ATA Hitachi = HTS72201 DCCO PQ: 0 ANSI: 5 [ 21.990614] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors = (120034 MB) [ 21.990624] sd 2:0:0:0: [sda] Write Protect is off [ 21.990626] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 21.990639] sd 2:0:0:0: [sda] Write cache: enabled, read cache: = enabled, doesn't support DPO or FUA [ 21.990677] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors = (120034 MB) [ 21.990684] sd 2:0:0:0: [sda] Write Protect is off [ 21.990686] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 21.990698] sd 2:0:0:0: [sda] Write cache: enabled, read cache: = enabled, doesn't support DPO or FUA [ 21.990701] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 > [ 22.066330] sd 2:0:0:0: [sda] Attached SCSI disk [ 22.069762] sd 2:0:0:0: Attached scsi generic sg0 type 0 [ 22.379804] kjournald starting. Commit interval 5 seconds [ 22.379815] EXT3-fs: mounted filesystem with ordered data mode. [ 30.462381] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 30.472357] shpchp: Standard Hot Plug PCI Controller Driver version: = 0.4 [ 30.570309] input: PC Speaker as /class/input/input2 [ 30.673059] Yenta: CardBus bridge found at 0000:03:01.0 [1028:01fe] [ 30.673086] Yenta O2: res at 0x94/0xD4: 00/ea [ 30.673088] Yenta O2: enabling read prefetch/write burst [ 30.749307] iwl4965: Intel(R) Wireless WiFi Link 4965AGN driver for = Linux, 1.1.0 [ 30.749310] iwl4965: Copyright(c) 2003-2007 Intel Corporation [ 30.802784] Yenta: ISA IRQ mask 0x0cb8, PCI irq 19 [ 30.802789] Socket status: 30000006 [ 30.802792] Yenta: Raising subordinate bus# of parent bus (#03) from = #04 to #07 [ 30.802800] pcmcia: parent PCI bridge I/O window: 0x2000 - 0x2fff [ 30.802803] pcmcia: parent PCI bridge Memory window: 0xf9a00000 - = 0xf9afffff [ 30.802805] pcmcia: parent PCI bridge Memory window: 0x88000000 - = 0x8bffffff [ 30.803468] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, = low) -> IRQ 17 [ 30.803501] PCI: Setting latency timer of device 0000:0c:00.0 to 64 [ 30.805213] iwl4965: Detected Intel Wireless WiFi Link 4965AGN [ 30.808268] nvidia: module license 'NVIDIA' taints kernel. [ 31.112385] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, = low) -> IRQ 16 [ 31.112397] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 31.112464] NVRM: loading NVIDIA UNIX x86_64 Kernel Module = 100.14.19 Wed Sep 12 14:08:38 PDT 2007 [ 31.261434] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, = low) -> IRQ 21 [ 31.262365] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 31.355533] input: PS/2 Mouse as /class/input/input3 [ 31.356500] iwl4965: Tunable channels: 11 802.11bg, 13 802.11a = channels [ 31.356678] wmaster0: Selected rate control algorithm 'iwl-4965-rs' [ 31.375734] input: AlpsPS/2 ALPS GlidePoint as /class/input/input4 [ 32.584886] lp: driver loaded but no devices found [ 33.145691] EXT3 FS on sda7, internal journal [ 33.842394] kjournald starting. Commit interval 5 seconds [ 33.842677] EXT3 FS on sda8, internal journal [ 33.842682] EXT3-fs: mounted filesystem with ordered data mode. [ 34.978585] ACPI: ACPI Dock Station Driver=20 [ 34.988090] input: Lid Switch as /class/input/input5 [ 34.988114] ACPI: Lid Switch [LID] [ 34.988148] input: Power Button (CM) as /class/input/input6 [ 34.988164] ACPI: Power Button (CM) [PBTN] [ 34.988197] input: Sleep Button (CM) as /class/input/input7 [ 34.988211] ACPI: Sleep Button (CM) [SBTN] [ 35.021820] ACPI: AC Adapter [AC] (on-line) [ 35.046072] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: found ejectable bay [ 35.046077] ACPI: \_SB_.PCI0.IDE0.SEC0.MAST: Adding notify handler [ 35.046105] ACPI: Bay [\_SB_.PCI0.IDE0.SEC0.MAST] Added [ 35.046117] ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: found ejectable bay [ 35.046120] ACPI: \_SB_.PCI0.IDE1.PRI_.MAST: Adding notify handler [ 35.046131] ACPI: Error installing bay notify handler [ 35.046134] ACPI: Bay [\_SB_.PCI0.IDE1.PRI_.MAST] Added [ 35.076789] ACPI: Battery Slot [BAT0] (battery present) [ 35.098930] ACPI: Battery Slot [BAT1] (battery present) [ 35.139000] ACPI: Video Device [VID] (multi-head: yes rom: no = post: no) [ 35.139431] ACPI: Video Device [VID1] (multi-head: yes rom: no = post: no) [ 35.139500] ACPI: Video Device [VID2] (multi-head: yes rom: no = post: no) [ 36.256092] PM: Writing back config space on device 0000:09:00.0 at = offset c (was ff770000, writing 0) [ 36.585316] NET: Registered protocol family 10 [ 36.585392] lo: Disabled Privacy Extensions [ 36.585426] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 36.585454] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 36.722272] Failure registering capabilities with primary security = module. [ 36.926026] ppdev: user-space parallel port driver [ 37.207112] audit(1209059700.837:3): type=3D1503 = operation=3D"inode_permission" requested_mask=3D"a" denied_mask=3D"a" = name=3D"/dev/tty" pid=3D5365 profile=3D"/usr/sbin/cupsd" [ 38.056620] Bluetooth: Core ver 2.11 [ 38.056707] NET: Registered protocol family 31 [ 38.056711] Bluetooth: HCI device and connection manager initialized [ 38.056717] Bluetooth: HCI socket layer initialized [ 38.091581] Bluetooth: L2CAP ver 2.8 [ 38.091588] Bluetooth: L2CAP socket layer initialized [ 38.158883] Bluetooth: RFCOMM socket layer initialized [ 38.159047] Bluetooth: RFCOMM TTY layer initialized [ 38.159052] Bluetooth: RFCOMM ver 1.8 [ 38.449190] tg3: eth0: Link is up at 1000 Mbps, full duplex. [ 38.449201] tg3: eth0: Flow control is on for TX and on for RX. [ 38.455411] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 40.427837] lirc_dev: IR Remote Control driver registered, at major = 61=20 [ 40.614560] Linux video capture interface: v2.00 [ 40.759473] bttv: driver version 0.9.17 loaded [ 40.759479] bttv: using 8 buffers with 2080k (520 pages) each for = capture [ 40.853330] ivtv: Start initialization, version 1.2.0 [ 40.853401] ivtv: End initialization [ 40.909895] cx88/0: cx2388x v4l2 driver version 0.0.6 loaded [ 41.310448] NET: Registered protocol family 17 [ 44.874818] eth0: no IPv6 routers present [ 74.245771] ata3.00: exception Emask 0x2 SAct 0x3f2 SErr 0x0 action = 0x2 frozen [ 74.245784] ata3.00: (spurious completions during NCQ issue=3D0x0 = SAct=3D0x3f2 FIS=3D005040a1:00000001) [ 74.245798] ata3.00: cmd 60/28:08:70:35:c6/00:00:07:00:00/40 tag 1 = cdb 0x0 data 20480 in [ 74.245801] res 50/00:d8:d8:35:c6/00:00:07:00:00/40 Emask = 0x2 (HSM violation) [ 74.245813] ata3.00: cmd 60/20:20:78:a3:c5/00:00:07:00:00/40 tag 4 = cdb 0x0 data 16384 in [ 74.245817] res 50/00:d8:d8:35:c6/00:00:07:00:00/40 Emask = 0x2 (HSM violation) [ 74.245829] ata3.00: cmd 60/08:28:b8:08:c6/00:00:07:00:00/40 tag 5 = cdb 0x0 data 4096 in [ 74.245832] res 50/00:d8:d8:35:c6/00:00:07:00:00/40 Emask = 0x2 (HSM violation) [ 74.245843] ata3.00: cmd 60/18:30:00:2c:c6/00:00:07:00:00/40 tag 6 = cdb 0x0 data 12288 in [ 74.245847] res 50/00:d8:d8:35:c6/00:00:07:00:00/40 Emask = 0x2 (HSM violation) [ 74.245858] ata3.00: cmd 60/18:38:58:35:c6/00:00:07:00:00/40 tag 7 = cdb 0x0 data 12288 in [ 74.245862] res 50/00:d8:d8:35:c6/00:00:07:00:00/40 Emask = 0x2 (HSM violation) [ 74.245874] ata3.00: cmd 60/00:40:e8:62:bf/01:00:07:00:00/40 tag 8 = cdb 0x0 data 131072 in [ 74.245877] res 50/00:d8:d8:35:c6/00:00:07:00:00/40 Emask = 0x2 (HSM violation) [ 74.245889] ata3.00: cmd 60/d8:48:d8:35:c6/00:00:07:00:00/40 tag 9 = cdb 0x0 data 110592 in [ 74.245892] res 50/00:d8:d8:35:c6/00:00:07:00:00/40 Emask = 0x2 (HSM violation) [ 74.268073] ata3: soft resetting port [ 74.276039] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 74.278111] ata3.00: configured for UDMA/133 [ 74.278143] ata3: EH complete [ 74.278663] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors = (120034 MB) [ 74.278997] sd 2:0:0:0: [sda] Write Protect is off [ 74.279004] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 74.279536] sd 2:0:0:0: [sda] Write cache: enabled, read cache: = enabled, doesn't support DPO or FUA [ 95.546148] ata3.00: exception Emask 0x2 SAct 0x77f7f SErr 0x0 = action 0x2 frozen [ 95.546160] ata3.00: (spurious completions during NCQ issue=3D0x0 = SAct=3D0x77f7f FIS=3D005040a1:00008000) [ 95.546173] ata3.00: cmd 61/08:00:f7:be:56/00:00:0b:00:00/40 tag 0 = cdb 0x0 data 4096 out [ 95.546177] res 50/00:10:8f:c0:56/00:00:0b:00:00/40 Emask = 0x2 (HSM violation) [ 95.546189] ata3.00: cmd 61/20:08:f7:bd:56/00:00:0b:00:00/40 tag 1 = cdb 0x0 data 16384 out [ 95.546192] res 50/00:10:8f:c0:56/00:00:0b:00:00/40 Emask = 0x2 (HSM violation) [ 95.546204] ata3.00: cmd 61/78:10:1f:be:56/00:00:0b:00:00/40 tag 2 = cdb 0x0 data 61440 out [ 95.546207] res 50/00:10:8f:c0:56/00:00:0b:00:00/40 Emask = 0x2 (HSM violation) [ 95.546219] ata3.00: cmd 61/60:18:9f:bf:56/00:00:0b:00:00/40 tag 3 = cdb 0x0 data 49152 out [ 95.546222] res 50/00:10:8f:c0:56/00:00:0b:00:00/40 Emask = 0x2 (HSM violation) [ 95.546234] ata3.00: cmd 61/18:20:07:c0:56/00:00:0b:00:00/40 tag 4 = cdb 0x0 data 12288 out [ 95.546238] res 50/00:10:8f:c0:56/00:00:0b:00:00/40 Emask = 0x2 (HSM violation) [ 95.546249] ata3.00: cmd 61/08:28:5f:bd:56/00:00:0b:00:00/40 tag 5 = cdb 0x0 data 4096 out [ 95.546252] res 50/00:10:8f:c0:56/00:00:0b:00:00/40 Emask = 0x2 (HSM violation) [ 95.546264] ata3.00: cmd 61/40:30:7f:bd:56/00:00:0b:00:00/40 tag 6 = cdb 0x0 data 32768 out [ 95.546268] res 50/00:10:8f:c0:56/00:00:0b:00:00/40 Emask = 0x2 (HSM violation) [ 95.546279] ata3.00: cmd 61/08:40:c7:bd:56/00:00:0b:00:00/40 tag 8 = cdb 0x0 data 4096 out [ 95.546283] res 50/00:10:8f:c0:56/00:00:0b:00:00/40 Emask = 0x2 (HSM violation) [ 95.546294] ata3.00: cmd 61/10:48:07:bf:56/00:00:0b:00:00/40 tag 9 = cdb 0x0 data 8192 out [ 95.546298] res 50/00:10:8f:c0:56/00:00:0b:00:00/40 Emask = 0x2 (HSM violation) [ 95.546310] ata3.00: cmd 61/18:50:d7:bd:56/00:00:0b:00:00/40 tag 10 = cdb 0x0 data 12288 out [ 95.546313] res 50/00:10:8f:c0:56/00:00:0b:00:00/40 Emask = 0x2 (HSM violation) [ 95.546325] ata3.00: cmd 61/60:58:1f:bf:56/00:00:0b:00:00/40 tag 11 = cdb 0x0 data 49152 out [ 95.546328] res 50/00:10:8f:c0:56/00:00:0b:00:00/40 Emask = 0x2 (HSM violation) [ 95.546340] ata3.00: cmd 61/08:60:9f:be:56/00:00:0b:00:00/40 tag 12 = cdb 0x0 data 4096 out [ 95.546343] res 50/00:10:8f:c0:56/00:00:0b:00:00/40 Emask = 0x2 (HSM violation) [ 95.546355] ata3.00: cmd 61/60:68:27:c0:56/00:00:0b:00:00/40 tag 13 = cdb 0x0 data 49152 out [ 95.546358] res 50/00:10:8f:c0:56/00:00:0b:00:00/40 Emask = 0x2 (HSM violation) [ 95.546370] ata3.00: cmd 61/08:70:87:bf:56/00:00:0b:00:00/40 tag 14 = cdb 0x0 data 4096 out [ 95.546374] res 50/00:10:8f:c0:56/00:00:0b:00:00/40 Emask = 0x2 (HSM violation) [ 95.546385] ata3.00: cmd 61/10:80:8f:c0:56/00:00:0b:00:00/40 tag 16 = cdb 0x0 data 8192 out [ 95.546389] res 50/00:10:8f:c0:56/00:00:0b:00:00/40 Emask = 0x2 (HSM violation) [ 95.546400] ata3.00: cmd 61/50:88:07:bd:56/00:00:0b:00:00/40 tag 17 = cdb 0x0 data 40960 out [ 95.546404] res 50/00:10:8f:c0:56/00:00:0b:00:00/40 Emask = 0x2 (HSM violation) [ 95.546416] ata3.00: cmd 61/30:90:bf:be:56/00:00:0b:00:00/40 tag 18 = cdb 0x0 data 24576 out [ 95.546419] res 50/00:10:8f:c0:56/00:00:0b:00:00/40 Emask = 0x2 (HSM violation) [ 95.585353] ata3: soft resetting port [ 95.605625] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 95.607709] ata3.00: configured for UDMA/133 [ 95.607762] ata3: EH complete [ 95.607883] sd 2:0:0:0: [sda] 234441648 512-byte hardware sectors = (120034 MB) [ 95.607905] sd 2:0:0:0: [sda] Write Protect is off [ 95.607911] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 95.607942] sd 2:0:0:0: [sda] Write cache: enabled, read cache: = enabled, doesn't support DPO or FUA [ 122.798217] pciehp: HPC vendor_id 8086 device_id 2a01 ss_vid 0 = ss_did 0 [ 122.798457] Evaluate _OSC Set fails. Status =3D 0x0005 [ 122.798492] Evaluate _OSC Set fails. Status =3D 0x0005 [ 122.798514] pciehp: Cannot get control of hotplug hardware for pci = 0000:00:01.0 [ 122.798662] pciehp: HPC vendor_id 8086 device_id 283f ss_vid 0 = ss_did 0 [ 122.798705] Evaluate _OSC Set fails. Status =3D 0x0005 [ 122.798735] Evaluate _OSC Set fails. Status =3D 0x0005 [ 122.798758] pciehp: Cannot get control of hotplug hardware for pci = 0000:00:1c.0 [ 122.798798] pciehp: HPC vendor_id 8086 device_id 2841 ss_vid 0 = ss_did 0 [ 122.798832] Evaluate _OSC Set fails. Status =3D 0x0005 [ 122.798859] Evaluate _OSC Set fails. Status =3D 0x0005 [ 122.798881] pciehp: Cannot get control of hotplug hardware for pci = 0000:00:1c.1 [ 122.798919] pciehp: HPC vendor_id 8086 device_id 2845 ss_vid 0 = ss_did 0 [ 122.798953] Evaluate _OSC Set fails. Status =3D 0x0005 [ 122.798979] Evaluate _OSC Set fails. Status =3D 0x0005 [ 122.799000] pciehp: Cannot get control of hotplug hardware for pci = 0000:00:1c.3 [ 122.799038] pciehp: HPC vendor_id 8086 device_id 2849 ss_vid 0 = ss_did 0 [ 122.799070] Evaluate _OSC Set fails. Status =3D 0x0005 [ 122.799096] Evaluate _OSC Set fails. Status =3D 0x0005 [ 122.799117] pciehp: Cannot get control of hotplug hardware for pci = 0000:00:1c.5 [ 122.799135] pciehp: PCI Express Hot Plug Controller Driver version: = 0.4 [ 128.803669] pciehp: PCI Express Hot Plug Controller Driver version: = 0.4 unloaded [ 129.685050] pciehp: HPC vendor_id 8086 device_id 2a01 ss_vid 0 = ss_did 0 [ 129.685304] Evaluate _OSC Set fails. Status =3D 0x0005 [ 129.685338] Evaluate _OSC Set fails. Status =3D 0x0005 [ 129.685361] pciehp: Cannot get control of hotplug hardware for pci = 0000:00:01.0 [ 129.685838] pciehp: HPC vendor_id 8086 device_id 283f ss_vid 0 = ss_did 0 [ 129.685874] Evaluate _OSC Set fails. Status =3D 0x0005 [ 129.685900] Evaluate _OSC Set fails. Status =3D 0x0005 [ 129.685932] pciehp: Cannot get control of hotplug hardware for pci = 0000:00:1c.0 [ 129.686565] pciehp: HPC vendor_id 8086 device_id 2841 ss_vid 0 = ss_did 0 [ 129.686603] Evaluate _OSC Set fails. Status =3D 0x0005 [ 129.686629] Evaluate _OSC Set fails. Status =3D 0x0005 [ 129.686650] pciehp: Cannot get control of hotplug hardware for pci = 0000:00:1c.1 [ 129.687956] pciehp: HPC vendor_id 8086 device_id 2845 ss_vid 0 = ss_did 0 [ 129.687998] Evaluate _OSC Set fails. Status =3D 0x0005 [ 129.688026] Evaluate _OSC Set fails. Status =3D 0x0005 [ 129.688047] pciehp: Cannot get control of hotplug hardware for pci = 0000:00:1c.3 [ 129.689434] pciehp: HPC vendor_id 8086 device_id 2849 ss_vid 0 = ss_did 0 [ 129.689476] Evaluate _OSC Set fails. Status =3D 0x0005 [ 129.689505] Evaluate _OSC Set fails. Status =3D 0x0005 [ 129.689526] pciehp: Cannot get control of hotplug hardware for pci = 0000:00:1c.5 [ 129.689983] pciehp: PCI Express Hot Plug Controller Driver version: = 0.4 [ 132.339937] cx23885 driver version 0.0.1 loaded [ 261.664368] pciehp: PCI Express Hot Plug Controller Driver version: = 0.4 unloaded [ 264.251609] acpiphp: ACPI Hot Plug PCI Controller Driver version: = 0.5 [ 264.282563] acpiphp_glue: can't get bus number, assuming 0 [ 264.282729] decode_hpp: Could not get hotplug parameters. Use = defaults [ 264.282783] acpiphp: Slot [1] registered [ 265.125349] cx23885 driver version 0.0.1 loaded ------_=_NextPart_000_01C8A63A.BE3C5C80 Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline -- video4linux-list mailing list Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe https://www.redhat.com/mailman/listinfo/video4linux-list ------_=_NextPart_000_01C8A63A.BE3C5C80--