From: mkrufky@linuxtv.org
To: mchehab@infradead.org
Cc: video4linux-list@redhat.com, linux-dvb@linuxtv.org,
gert.vervoort@hccnet.nl
Subject: Re: Hauppauge WinTV regreession from 2.6.24 to 2.6.25
Date: Fri, 25 Apr 2008 11:06:57 -0400 [thread overview]
Message-ID: <4811F391.1070207@linuxtv.org> (raw)
In-Reply-To: <20080425114526.434311ea@gaivota>
Mauro Carvalho Chehab wrote:
> On Fri, 25 Apr 2008 10:40:14 -0400
> "Michael Krufky" <mkrufky@linuxtv.org> wrote:
>
>
>> On Fri, Apr 25, 2008 at 9:56 AM, Mauro Carvalho Chehab
>> <mchehab@infradead.org> wrote:
>>
>>> On Thu, 24 Apr 2008 05:55:28 +0200
>>> hermann pitton <hermann-pitton@arcor.de> wrote:
>>>
>>> > > > >>>> I am testing a kernel upgrade from 2.6.24.to 2.6.25, and the
drivers
>>> > > > >>>> for the Hauppauge WinTV appear to have suffered some
regression
>>> > > > >>>> between the two kernel versions.
>>>
>>>
>>>
>>>> do you see the auto detection issue?
>>>>
>>> >
>>> > Either tell it is just nothing, what I very seriously doubt, or
please
>>> > comment.
>>> >
>>> > I don't like to end up on LKML again getting told that written rules
>>> > don't exist ;)
>>>
>>> Sorry for now answer earlier. Too busy here, due to the merge window.
>>>
>>> This seems to be an old bug. On several cases, tuner_type information
came from
>>> some sort of autodetection schema, but the proper setup is not sent to
tuner.
>>>
>>> Please test the enclosed patch. It warrants that TUNER_SET_TYPE_ADDR is
called
>>> at saa7134_board_init2() for all those boards:
>>>
>>> SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331
>>> SAA7134_BOARD_ASUS_EUROPA2_HYBRID
>>> SAA7134_BOARD_ASUSTeK_P7131_DUAL
>>> SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA
>>> SAA7134_BOARD_AVERMEDIA_SUPER_007
>>> SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM
>>> SAA7134_BOARD_BMK_MPEX_NOTUNER
>>> SAA7134_BOARD_BMK_MPEX_TUNER
>>> SAA7134_BOARD_CINERGY_HT_PCI
>>> SAA7134_BOARD_CINERGY_HT_PCMCIA
>>> SAA7134_BOARD_CREATIX_CTX953
>>> SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS
>>> SAA7134_BOARD_FLYDVB_TRIO
>>> SAA7134_BOARD_HAUPPAUGE_HVR1110
>>> SAA7134_BOARD_KWORLD_ATSC110
>>> SAA7134_BOARD_KWORLD_DVBT_210
>>> SAA7134_BOARD_MD7134
>>> SAA7134_BOARD_MEDION_MD8800_QUADRO
>>> SAA7134_BOARD_PHILIPS_EUROPA
>>> SAA7134_BOARD_PHILIPS_TIGER
>>> SAA7134_BOARD_PHILIPS_TIGER_S
>>> SAA7134_BOARD_PINNACLE_PCTV_310i
>>> SAA7134_BOARD_TEVION_DVBT_220RF
>>> SAA7134_BOARD_TWINHAN_DTV_DVB_3056
>>> SAA7134_BOARD_VIDEOMATE_DVBT_200
>>> SAA7134_BOARD_VIDEOMATE_DVBT_200A
>>> SAA7134_BOARD_VIDEOMATE_DVBT_300
>>>
>>> It is important to test the above boards, to be sure that no regression
is
>>> caused.
>>>
>>> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
>>>
>>> diff -r 60110897e86a linux/drivers/media/video/saa7134/saa7134-cards.c
>>> --- a/linux/drivers/media/video/saa7134/saa7134-cards.c Fri Apr 25
08:04:54 2008 -0300
>>> +++ b/linux/drivers/media/video/saa7134/saa7134-cards.c Fri Apr 25
10:44:16 2008 -0300
>>>
>> Mauro,
>>
>> I didn't review your patch yet, and it needs to be tested, however,
>> the bug reported in this thread deals with the same regression that
>> you are attempting to repair, but on the cx88 driver -- not the
>> saa7134 driver.
>>
>
> Hmm... it seems that people merged two similar issues together, on
different
> drivers. At least, part of the reports at the thread were with saa7134
driver.
>
> I'll investigate if this solution will also work for cx88.
Mauro,
"...people merged two similar issues together, on different drivers..."
It was you -- did you forget?
cx88: http://linuxtv.org/hg/v4l-dvb/rev/2eb392c86745
saa7134: http://linuxtv.org/hg/v4l-dvb/rev/e7668fc3666c
I'm surprised that you don't remember this -- you pushed this to Linus
late in the 2.6.25-rcX, after I had strongly advised against this -- I
warned you that this may create regressions, needed thorough testing,
and was too risky a change to push into the middle of 2.6.25-rc
I hate to say, "I told you so" .... but.............
;-)
Lets get your fixes tested ASAP so we can fix 2.6.25-stable.
Regards,
Mike
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
next prev parent reply other threads:[~2008-04-25 15:07 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-04-19 20:57 Hauppauge WinTV regreession from 2.6.24 to 2.6.25 Ian Pickworth
2008-04-20 0:47 ` hermann pitton
2008-04-20 9:15 ` Ian Pickworth
2008-04-20 11:20 ` Gert Vervoort
2008-04-20 12:26 ` Ian Pickworth
2008-04-20 13:06 ` hermann pitton
2008-04-20 16:18 ` Gert Vervoort
2008-04-20 21:16 ` hermann pitton
2008-04-24 3:55 ` hermann pitton
2008-04-25 13:56 ` Mauro Carvalho Chehab
2008-04-25 14:40 ` Michael Krufky
2008-04-25 14:45 ` Mauro Carvalho Chehab
2008-04-25 15:06 ` mkrufky [this message]
2008-04-25 21:48 ` hermann pitton
2008-04-25 23:41 ` hermann pitton
2008-04-26 11:59 ` Mauro Carvalho Chehab
2008-04-26 12:58 ` Ian Pickworth
2008-04-26 14:06 ` Mauro Carvalho Chehab
2008-04-26 22:10 ` hermann pitton
2008-04-26 23:19 ` Mauro Carvalho Chehab
2008-04-27 20:15 ` hermann pitton
2008-04-27 21:18 ` [linux-dvb] " Hartmut Hackmann
2008-04-28 1:01 ` hermann pitton
2008-04-28 14:21 ` Mauro Carvalho Chehab
2008-04-28 14:14 ` Mauro Carvalho Chehab
2008-04-25 15:03 ` Mauro Carvalho Chehab
2008-04-25 16:55 ` Gert Vervoort
2008-04-25 17:02 ` Gert Vervoort
[not found] ` <20080426090725.4a0fdcd4@gaivota>
2008-04-26 14:23 ` Gert Vervoort
2008-04-26 15:38 ` Mauro Carvalho Chehab
2008-04-26 16:59 ` Gert Vervoort
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4811F391.1070207@linuxtv.org \
--to=mkrufky@linuxtv.org \
--cc=gert.vervoort@hccnet.nl \
--cc=linux-dvb@linuxtv.org \
--cc=mchehab@infradead.org \
--cc=video4linux-list@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox