From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from ns1019.yellis.net ([213.246.41.159] helo=vds19s01.yellis.net) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1Jqomu-0002Ek-Fx for linux-dvb@linuxtv.org; Tue, 29 Apr 2008 14:18:25 +0200 Received: from goliath.anevia.com (cac94-10-88-170-236-224.fbx.proxad.net [88.170.236.224]) by vds19s01.yellis.net (Postfix) with ESMTP id E9A552FAA13 for ; Tue, 29 Apr 2008 14:18:27 +0200 (CEST) Received: from [10.0.1.25] (fcand.anevia.com [10.0.1.25]) by goliath.anevia.com (Postfix) with ESMTP id A59DA1300236 for ; Tue, 29 Apr 2008 14:18:18 +0200 (CEST) Message-ID: <48171207.8080602@anevia.com> Date: Tue, 29 Apr 2008 14:18:15 +0200 From: Frederic CAND MIME-Version: 1.0 To: linux-dvb@linuxtv.org References: <4816E5DA.7010204@anevia.com> <1209467866.3247.45.camel@pc10.localdom.local> In-Reply-To: <1209467866.3247.45.camel@pc10.localdom.local> Subject: Re: [linux-dvb] KNC TV Station DVR Tuner Sound Issue List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: hermann pitton a =E9crit : > Hi Frederic, > = > Am Dienstag, den 29.04.2008, 11:09 +0200 schrieb Frederic CAND: >> Dear all, >> >> I recently had to change v4l drivers to support my WinTV HVR 1300. >> I have issues making my HVR work but that's not the point here. >> My problem is that since I updated kernel + drivers, I can't manage to = >> make sound work when I'm using the tuner input. Sound jack input works = >> when I'm using SVideo or Composite Video, but not when I'm using tuner. >> >> Here are the options I'm using >> tuner : port2=3D0 >> saa7134: oss=3D1 disable_ir=3D1 >> saa7134-oss: rate=3D48000 > = > the rate=3D48000 is only valid for external analog input and disables > sound from tuner. Have a look at the saa7134-oss mixer under such > conditions. > = > You must use default rate of 32000 for dma sound from tuner. > = > The saa7134-oss is also soon deprecated and replaced by saa7134-alsa. > = > If you are considering using recent v4l-dvb mercurial stuff, which > should be best for the HVR1300 and reporting bugs on saa7134-empress, > you might still have your old saa7134-oss module around and some others > like the old video_buf now loaded, since not deleted on upgrade. > = > After make rmmod and rminstall with current v4l-dvb you should delete > such remaining modules on older kernels too before make install. > = > Cheers, > Hermann hum I used to set rate to 48000 with my old 2005 july snapshot and it = was working even with tuner ... but ok I'll try 32000 i've tried alsa and I had the same results, that is no sound with tuner = but line in sound with composite and svideo do I need some special stuffs compiled in my kernel except from config_snd ? about old modules still loaded this can't be since I build my system = from scratch each time i try a new kernel / driver into an ext2 file, = which I put on a 32MB flash disk and boot on it ... so I'm sure I'm not = using my old v4l snapshot, but the 2.6.22.19 v4l drivers I'll let you know if I can make it work -- = CAND Frederic Product Manager ANEVIA _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb