From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.hauppauge.com ([167.206.143.4]) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1JrMXl-0005Z4-LZ for linux-dvb@linuxtv.org; Thu, 01 May 2008 02:21:40 +0200 Message-ID: <48190CDB.3080307@linuxtv.org> Date: Wed, 30 Apr 2008 20:20:43 -0400 From: Michael Krufky MIME-Version: 1.0 To: Eric Cronin References: <37219a840804301134q68a86301y2373329d2fef5a2f@mail.gmail.com> <37219a840804301136r71b240afi16dcf75b5442fe1b@mail.gmail.com> In-Reply-To: Cc: linux-dvb@linuxtv.org Subject: Re: [linux-dvb] HVR-1800 failing to detect any QAM256 channels List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: Eric Cronin wrote: > > On Apr 30, 2008, at 2:36 PM, Michael Krufky wrote: > >>> >>> Eric, >>> >>> When you use the scan command to scan for QAM channels, you must >>> specify -a2, to signify that you are scanning digital cable. >>> >>> Try that -- does that work? >> >> >> My bad -- I meant, "-A 2" (capitol A, space, 2) scan -A 2 -vvv dvb-apps/util/scan/atsc/us-Cable-Standard-whatever > channels.conf Is THAT what you're doing to scan ? It looks like what you were doing was scan a tuned frequency for pids. If you want to do THAT, then you must actually be tuned to the given frequency. you need to azap SOME_CHANNEL -r, and keep that running before attempting to run 'scan -c' ... I think you should try the scan command that I mentioned above. HTH, Mike _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb