From: pjama <pjama@optusnet.com.au>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] probs with af901x on mythbuntu
Date: Mon, 05 May 2008 12:40:25 +1000 [thread overview]
Message-ID: <481E7399.1040909@optusnet.com.au> (raw)
Hi,
I have a DigitalNow TinyTwin DVB-T Receiver which I believe to be a Afatech 9015 (9013?) TV card on a USB stick. It works just fine in Windoze but I'm trying to get it going in MythBuntu 8.04.
I've compiled and installed the bleeding edge af9015-74e494a9496 drivers from http://linuxtv.org/hg/~anttip/af9015 and dvb-usb-af9015.fw ver 4.95.0 from http://www.otit.fi/~crope/v4l-dvb/af9015/af9015_firmware_cutter/firmware_files/
however I cant get it to find any TV stations with kaffeine or scan. Kaffiene just doesn't find anything, scan gives me:
peter@SunU20:~$ sudo scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/au-Brisbane
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/au-Brisbane
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
main:2247: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 16 Device or resource busy
peter@SunU20:~$
Relevant stuff from dmesg
[ 33.795048] input: Afatech DVB-T 2 as /devices/pci0000:00/0000:00:02.1/usb1/1-2/1-2:1.1/input/input1
[ 33.807958] input,hidraw0: USB HID v1.01 Keyboard [Afatech DVB-T 2] on usb-0000:00:02.1-2
....
[ 6666.511668] af9015_usb_probe: interface:0
[ 6666.513096] af9015_identify_state: reply:02
[ 6666.513101] dvb-usb: found a 'DigitalNow TinyTwin DVB-T Receiver' in warm state.
[ 6666.513517] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 6666.514236] DVB: registering new adapter (DigitalNow TinyTwin DVB-T Receiver)
[ 6666.514982] af9015_eeprom_dump:
[ 6666.546073] 00: 2a 88 9b 0b 00 00 00 00 d3 13 26 32 00 02 01 02
[ 6666.578049] 10: 03 80 00 fa fa 10 40 ef 01 30 31 30 31 30 39 31
[ 6666.610025] 20: 34 30 36 30 30 30 30 31 ff ff ff ff ff ff ff ff
[ 6666.642003] 30: 00 01 3a 01 00 08 02 00 da 11 00 00 1e ff ff ff
[ 6666.673980] 40: ff ff ff ff ff 08 02 00 da 11 00 00 1e ff ff ff
[ 6666.705956] 50: ff ff ff ff ff 24 00 00 04 03 09 04 10 03 41 00
[ 6666.737931] 60: 66 00 61 00 74 00 65 00 63 00 68 00 10 03 44 00
[ 6666.769901] 70: 56 00 42 00 2d 00 54 00 20 00 32 00 20 03 30 00
[ 6666.801885] 80: 31 00 30 00 31 00 30 00 31 00 30 00 31 00 30 00
[ 6666.833861] 90: 36 00 30 00 30 00 30 00 30 00 31 00 00 ff ff ff
[ 6666.865838] a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6666.897814] b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6666.929790] c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6666.961767] d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6666.993743] e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6667.025712] f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 6667.027720] af9015_read_config: xtal:2 set adc_clock:28000
[ 6667.031717] af9015_read_config: IF1:4570
[ 6667.035715] af9015_read_config: MT2060 IF1:0
[ 6667.037704] af9015_read_config: tuner id1:30
[ 6667.039708] af9015_read_config: spectral inversion:0
[ 6667.045704] af9013: firmware version:4.73.0
[ 6667.045926] DVB: registering frontend 0 (Afatech AF9013 DVB-T)...
[ 6667.046223] af9015_tuner_attach:
[ 6667.046228] af9015_set_gpio: gpio:1 gpioval:03
[ 6667.087916] mxl500x_attach: Attaching ...
[ 6667.087924] mxl500x_attach: MXL500x tuner succesfully attached
[ 6667.087929] dvb-usb: DigitalNow TinyTwin DVB-T Receiver successfully initialized and connected.
[ 6667.087933] af9015_init:
[ 6667.087936] af9015_init_endpoint: USB speed:3
[ 6667.109656] af9015_download_ir_table:
[ 6667.361511] usbcore: registered new interface driver dvb_usb_af9015
peter@SunU20:~$ sudo lsusb -v
[sudo] password for peter:
Bus 002 Device 002: ID 13d3:3226 IMC Networks
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x13d3 IMC Networks
idProduct 0x3226
bcdDevice 2.00
iManufacturer 1 Afatech
iProduct 2 DVB-T 2
iSerial 3 010101010600001
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 71
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 500mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 4
bInterfaceClass 255 Vendor Specific Class
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x84 EP 4 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x85 EP 5 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.01
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 65
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 16
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
Any assistance appreciated.
WARNING: I'm not all that familiar with TV cards/sticks in general please write slowly ;)
Peter
--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next reply other threads:[~2008-05-05 2:40 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-05 2:40 pjama [this message]
2008-05-05 4:49 ` [linux-dvb] probs with af901x on mythbuntu Bastiaan Wentink
2008-05-05 8:03 ` pjama
2008-05-05 9:06 ` Antti Palosaari
2008-05-05 10:32 ` pjama
2008-05-05 10:52 ` Antti Palosaari
2008-05-05 11:48 ` pjama
2008-05-05 15:48 ` Antti Palosaari
2008-05-11 7:03 ` pjama
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=481E7399.1040909@optusnet.com.au \
--to=pjama@optusnet.com.au \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox