public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: pjama <pjama@optusnet.com.au>
To: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] probs with af901x on mythbuntu
Date: Mon, 05 May 2008 18:03:47 +1000	[thread overview]
Message-ID: <481EBF63.2050601@optusnet.com.au> (raw)
In-Reply-To: <481E91D8.7010404@wentink.de>



Bastiaan Wentink wrote:
> Hi :)
> 
> have you stopped mythtvbackend?
> Command is afaik /etc/init.d/mythtvbackend stop.
> I had the same thing with mythbuntu
> 

Hi Bastiann,
Thanks for the reply. You are exactly right. Mythbuntu has locked the cardfor it's own selfish use. "sudo /etc/init.d/mythtv-backend stop" will kill it.

OK next problem. I now get:
peter@SunU20:~$ sudo scan /usr/share/doc/dvb-utils/examples/scan/dvb-t/au-Brisbane
scanning /usr/share/doc/dvb-utils/examples/scan/dvb-t/au-Brisbane
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 226500000 1 3 9 3 1 1 0
initial transponder 177500000 1 2 9 3 1 2 0
initial transponder 191625000 1 3 9 3 1 1 0
initial transponder 219500000 1 3 9 3 1 1 0
initial transponder 585625000 1 2 9 3 1 2 0
>>> tune to: 226500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE
WARNING: >>> tuning failed!!!
>>> tune to: 226500000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE (tuning failed)

< repeated several times with a different channel but similar failed message >

WARNING: >>> tuning failed!!!
>>> tune to: 585625000:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_8:HIERARCHY_NONE (tuning failed)
WARNING: >>> tuning failed!!!
ERROR: initial tuning failed
dumping lists (0 services)
Done.
peter@SunU20:~$


Now (while donning my flame proof suit), I must confess that I hadn't thoroughly gone through the mailing list (google failed me) but since posting I've discovered a few things....

1) in dmesg where it says "af9013: firmware version:4.73.0" Does this mean it found version 4.73.0 on the device or in the /lib/firmware/kernel<blah>/dvb_usb_af9015 file? I believe I installed version 4.95.0 (but being a binary file it's hard to confirm). Should they match, Can I upgrade the device or should I downgrade the dvb_usb_af9015 file?

2) A post from Antti back in the beginning of April (http://www.linuxtv.org/pipermail/linux-dvb/2008-April/025267.html) says the driver works but tuning fails because of the MXL5005 tuner. Bummer! 
Antti, did you get the usb sniff that you were after? If not, can you recommend an application that can dump a suitable file?

Cheers
peter

-- 
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.


_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

  reply	other threads:[~2008-05-05  8:04 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-05-05  2:40 [linux-dvb] probs with af901x on mythbuntu pjama
2008-05-05  4:49 ` Bastiaan Wentink
2008-05-05  8:03   ` pjama [this message]
2008-05-05  9:06     ` Antti Palosaari
2008-05-05 10:32       ` pjama
2008-05-05 10:52         ` Antti Palosaari
2008-05-05 11:48           ` pjama
2008-05-05 15:48             ` Antti Palosaari
2008-05-11  7:03               ` pjama

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=481EBF63.2050601@optusnet.com.au \
    --to=pjama@optusnet.com.au \
    --cc=linux-dvb@linuxtv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox