From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from ppp196-18.static.internode.on.net ([59.167.196.18] helo=jumpgate.rods.id.au) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1Jtsoc-0006Qq-6t for linux-dvb@linuxtv.org; Thu, 08 May 2008 01:13:01 +0200 Received: from jumpgate.rods.id.au (localhost [127.0.0.1]) by jumpgate.rods.id.au (Postfix) with ESMTP id E10305E79CD for ; Thu, 8 May 2008 08:34:53 +1000 (EST) Received: from [192.168.3.44] (shadow.rods.id.au [192.168.3.44]) by jumpgate.rods.id.au (Postfix) with ESMTP id A45035E79CC for ; Thu, 8 May 2008 08:34:53 +1000 (EST) Message-ID: <48222E8D.3040409@Rods.id.au> Date: Thu, 08 May 2008 08:34:53 +1000 From: Rod MIME-Version: 1.0 To: linux-dvb@linuxtv.org Content-Type: multipart/mixed; boundary="------------050703060509090508070803" Subject: [linux-dvb] [Fwd: Re: Try to Make DVB-T part of Compro VideoMate T750 Work] List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: This is a multi-part message in MIME format. --------------050703060509090508070803 Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Repost as I think I fell off the list ;o( --------------050703060509090508070803 Content-Type: message/rfc822; name="Re: Try to Make DVB-T part of Compro VideoMate T750 Work.eml" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename*0="Re: Try to Make DVB-T part of Compro VideoMate T750 Work.eml" Return-Path: X-Original-To: rod@rods.id.au Delivered-To: rod@rods.id.au Received: from jumpgate.rods.id.au (localhost [127.0.0.1]) by jumpgate.rods.id.au (Postfix) with ESMTP id 47F2B5B02E5 for ; Thu, 8 May 2008 00:54:37 +1000 (EST) Received: from www.linuxtv.org (www.linuxtv.org [212.227.166.180]) by jumpgate.rods.id.au (Postfix) with ESMTP id 0C1DC5062DA for ; Thu, 8 May 2008 00:54:36 +1000 (EST) Received: from localhost ([127.0.0.1] helo=www.linuxtv.org) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1Jtl1s-0001U9-9r for rod@rods.id.au; Wed, 07 May 2008 16:54:00 +0200 Subject: Re: Try to Make DVB-T part of Compro VideoMate T750 Work From: linux-dvb-owner@linuxtv.org To: rod@rods.id.au MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="===============0100337353==" Message-ID: Date: Wed, 07 May 2008 16:53:58 +0200 Precedence: bulk X-BeenThere: linux-dvb@linuxtv.org X-Mailman-Version: 2.1.9 List-Id: Linux DVB drivers X-List-Administrivia: yes Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+rod=rods.id.au@linuxtv.org X-Virus-Scanned: ClamAV using ClamSMTP X-DSPAM-Result: Innocent X-DSPAM-Processed: Thu May 8 00:54:51 2008 X-DSPAM-Confidence: 0.9993 X-DSPAM-Probability: 0.0000 X-DSPAM-Signature: 4821c2bb110341336712104 X-DSPAM-Factors: 27, it+>, 0.00011, >+Hi, 0.00012, >+Thanks, 0.00014, DVB, 0.00017, DVB, 0.00017, frontend, 0.00026, Hi+>, 0.00026, Thanks+>, 0.00035, version+0, 0.00039, as+>, 0.00041, DVB+T, 0.00049, DVB+T, 0.00049, 2+>, 0.00050, >+My, 0.00053, ALSA, 0.00055, dvb, 0.00061, dvb, 0.00061, i2c, 0.00065, i2c, 0.00065, v4l, 0.00080, v4l, 0.00080, this?+>, 0.00090, X-Mailman-Version*2.1.9, 0.00092, channels+>, 0.00097, >+[, 0.00097, >+[, 0.00097, Errors-To*bounces+rod=rods.id.au, 0.00100 --===============0100337353== Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit You are not allowed to post to this mailing list, and your message has been automatically rejected. If you think that your messages are being rejected in error, contact the mailing list owner at linux-dvb-owner@linuxtv.org. --===============0100337353== Content-Type: message/rfc822 MIME-Version: 1.0 Received: from ppp196-18.static.internode.on.net ([59.167.196.18] helo=jumpgate.rods.id.au) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1Jtl18-0001KR-RT for linux-dvb@linuxtv.org; Wed, 07 May 2008 16:53:57 +0200 Received: from jumpgate.rods.id.au (localhost [127.0.0.1]) by jumpgate.rods.id.au (Postfix) with ESMTP id 727EF5B5A56; Wed, 7 May 2008 22:23:38 +1000 (EST) Received: from [192.168.3.44] (shadow.rods.id.au [192.168.3.44]) by jumpgate.rods.id.au (Postfix) with ESMTP id 3F01F5B02E5; Wed, 7 May 2008 22:23:38 +1000 (EST) Message-ID: <48219F49.9090709@Rods.id.au> Disposition-Notification-To: Rod Date: Wed, 07 May 2008 22:23:37 +1000 From: Rod User-Agent: Thunderbird 2.0.0.12 (X11/20080316) MIME-Version: 1.0 To: lin CC: linux-dvb@linuxtv.org Subject: Re: Try to Make DVB-T part of Compro VideoMate T750 Work References: <200805071307.15982.b87605214@ntu.edu.tw> In-Reply-To: <200805071307.15982.b87605214@ntu.edu.tw> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit X-Virus-Scanned: ClamAV using ClamSMTP X-LSpam-Score: -1.9 (-) X-LSpam-Report: No, score=-1.9 required=5.0 tests=AWL=-0.648,BAYES_00=-2.599,WEIRD_QUOTING=1.396 autolearn=no Hi, what I2C addresses are you using for each device? lin wrote: > Hi: > > At preseant, I'm trying to make DVB-T work on Compro T750 (an digital/analog > hybrid TV capture card) while analog part has already been implemented by > Newbigin. Since I can only recieve DVB-T signal, I'll mainly focus on DVB-T > part implementation. > > First of all, I need to make sure the chips used on this card. They are... > Philips ""saa7135"" as main video audio decoder > Quantek ""qt1010"" as digital TV silicon tuner > Intel ""ce6353"" or Zarlink ""zl10353""??? as demodulator behind qt1010 > ( I'm not sure which one is the real demodulator adopted on this card. Does > anybody have further information?) > Xceive ""xc2028"" as analog TV silicon tuner > > My current v4l-dvb version is checked out from linuxtv Mercurial server > http://linuxtv.org/hg/v4l-dvb > (v4l-dvb-4c4fd6b8755c) > , and I manunally patch Newbigin's code on it > http://www.chrysocome.net/downloads/v4l-dvb-experimental-t750-0.2.diff > The firmware used by xc2028 driver are generated by extract_xc3028.pl pearl > scripts. After get all of this done, I can view several DVB-T TV channels > through Kaffeine, but the quality is unacceptable. The situation seems only > key frames are decode properly, and the other frames are simply > blocked "like" the antenna signal weak. So does the sound. > > The following is the dmesg related to v4l-dvb modules: > > [ 43.971924] Linux video capture interface: v2.00 > [ 44.042551] saa7130/34: v4l2 driver version 0.2.14 loaded > [ 44.042642] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 > (level, high) -> IRQ 20 > [ 44.042652] saa7133[0]: found at 0000:01:07.0, rev: 209, irq: 20, latency: > 32, mmio: 0xdf001000 > [ 44.042660] saa7133[0]: subsystem: 185b:c900, board: Compro VideoMate T750 > [card=139,autodetected] > [ 44.042670] saa7133[0]: board init: gpio is 849300 > [ 44.042767] input: saa7134 IR (Compro VideoMate T7 as /class/input/input4 > [ 44.204856] saa7133[0]: i2c eeprom 00: 5b 18 00 c9 54 20 1c 00 43 43 a9 1c > 55 d2 b2 92 > [ 44.204866] saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff > ff ff ff ff > [ 44.204874] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 03 01 08 ff 00 87 > ff ff ff ff > [ 44.204881] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff > [ 44.204888] saa7133[0]: i2c eeprom 40: ff d7 00 c4 86 1e 05 ff 02 c2 ff 01 > ff ff ff ff > [ 44.204895] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff cb > [ 44.204902] saa7133[0]: i2c eeprom 60: 35 ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff > [ 44.204914] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff > [ 44.204921] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff > [ 44.204928] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff > [ 44.204935] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff > [ 44.204942] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff > [ 44.204949] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff > [ 44.204956] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff > [ 44.204963] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff > [ 44.204970] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff > ff ff ff ff > [ 44.340757] tuner' 2-0061: chip found @ 0xc2 (saa7133[0]) > [ 44.348645] tuner' 2-0062: chip found @ 0xc4 (saa7133[0]) > [ 44.356706] tuner' 2-0063: chip found @ 0xc6 (saa7133[0]) > [ 44.369421] tuner' 2-0068: chip found @ 0xd0 (saa7133[0]) > [ 44.379813] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 20 > [ 44.379820] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 20 > (level, high) -> IRQ 18 > [ 44.379850] PCI: Setting latency timer of device 0000:00:06.0 to 64 > [ 44.419310] xc2028 2-0061: type set to XCeive xc2028/xc3028 tuner > [ 44.524079] xc2028 2-0061: Loading 80 firmware images from xc3028-v27.fw, > type: xc2028 firmware, ver 2.7 > [ 45.268105] xc2028 2-0061: Loading firmware for type=BASE F8MHZ MTS (7), id > 0000000000000000. > [ 46.024569] xc2028 2-0061: i2c output error: rc = -5 (should be 64) > [ 46.024573] xc2028 2-0061: -5 returned from send > [ 46.024577] xc2028 2-0061: Error -22 while loading base firmware > [ 46.082924] intel8x0_measure_ac97_clock: measured 59209 usecs > [ 46.082929] intel8x0: clocking to 47499 > [ 46.829573] xc2028 2-0061: Loading firmware for type=BASE F8MHZ MTS (7), id > 0000000000000000. > [ 47.573565] input: ImPS/2 Logitech Wheel Mouse as /class/input/input5 > [ 47.581186] xc2028 2-0061: i2c output error: rc = -5 (should be 64) > [ 47.581191] xc2028 2-0061: -5 returned from send > [ 47.581195] xc2028 2-0061: Error -22 while loading base firmware > [ 48.325117] xc2028 2-0061: Loading firmware for type=BASE F8MHZ MTS (7), id > 0000000000000000. > [ 49.112002] xc2028 2-0061: i2c output error: rc = -5 (should be 64) > [ 49.112007] xc2028 2-0061: -5 returned from send > [ 49.112012] xc2028 2-0061: Error -22 while loading base firmware > [ 49.911789] xc2028 2-0061: Loading firmware for type=BASE F8MHZ MTS (7), id > 0000000000000000. > [ 50.665031] xc2028 2-0061: i2c output error: rc = -5 (should be 64) > [ 50.665036] xc2028 2-0061: -5 returned from send > [ 50.665040] xc2028 2-0061: Error -22 while loading base firmware > [ 50.677464] saa7133[0]: registered device video0 [v4l2] > [ 50.679443] saa7133[0]: registered device vbi0 > [ 50.681560] saa7133[0]: registered device radio0 > [ 50.707733] Compro VideoMate T750 DVB setup > [ 50.740839] saa7134 ALSA driver for DMA sound loaded > [ 50.740875] saa7133[0]/alsa: saa7133[0] at 0xdf001000 irq 20 registered as > card -2 > [ 50.766307] Attaching pll > [ 50.802239] Quantek QT1010 successfully identified. > [ 50.802246] DVB: registering new adapter (saa7133[0]) > [ 50.802255] DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)... > > > > > Do you have any suggestion about this? > > Thanks > > > linleno > > > --===============0100337353==-- --------------050703060509090508070803 Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Disposition: inline _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb --------------050703060509090508070803--