Re: [linux-dvb] Technotrend S2-3200 Scanning

[Jelle De Loecker <skerit@kipdola.com>]

Hi Igor,

I've tried using a version from the repository, dvb-utils 1.1.1-3

I also tried to compile the originals from the source tree, unpatched, 
http://linuxtv.org/hg/dvb-apps

I tried to patch "scan" with this scan source: 
http://jusst.de/manu/scan.tar.bz2

And I tried to patch szap with this file:  
http://abraham.manu.googlepages.com/szap.c

But those patched versions won't compile, except for ONE time:

I finally got to compile the patched "scan" (but trying to recompile 
afterwards failed again, very strange) but it *still* didn't scan:

$ sudo scan -t 1 -s 1 dvb-s/Astra-19.2E > ~/channels.conf
scanning dvb-s/Astra-19.2E
using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
initial transponder 12551500 V 22000000 22000000
ioctl DVBFE_GET_INFO failed: Operation not supported
ERROR: initial tuning failed
dumping lists (0 services)
Done.



Igor schreef:
> which version of multiproto, szap2, scan did you use ?
>
> -----Original Message-----
> From: Jelle De Loecker <skerit@kipdola.com>
> To: linux-dvb@linuxtv.org
> Date: Fri, 16 May 2008 01:02:08 +0200
> Subject: [linux-dvb] Technotrend S2-3200 Scanning
>
>   
>> But now I'm stuck again, and it seems to me this is a problem which has 
>> been faced, and fixed, before - I just can't fix it now because 
>> apparently so much has changed that all the patches don't work on the 
>> new source files anymore: any hacked "scan" or "szap" program won't compile.
>>
>> (Keep in mind I'm using a switch between my S2-3200 card and my 4 LNBs - 
>> will this cause any problems?)
>>
>> This is the problem you've no doubt seen before.
>>
>> $ sudo scan /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-19.2E 
>>  >channels.conf
>>
>> scanning /usr/share/doc/dvb-utils/examples/scan/dvb-s/Astra-19.2E
>> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0'
>> initial transponder 12551500 V 22000000 5
>>  >>> tune to: 12551:v:0:22000
>> __tune_to_transponder:1491: ERROR: FE_READ_STATUS failed: 22 Invalid 
>> argument
>>  >>> tune to: 12551:v:0:22000
>> __tune_to_transponder:1491: ERROR: FE_READ_STATUS failed: 22 Invalid 
>> argument
>> ERROR: initial tuning failed
>> dumping lists (0 services)
>> Done

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb