From: Antti Palosaari <crope@iki.fi>
To: pjama@optusnet.com.au
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] IR for Afatech 901x
Date: Wed, 21 May 2008 14:40:25 +0300 [thread overview]
Message-ID: <48340A29.6030505@iki.fi> (raw)
In-Reply-To: <27514.203.9.185.254.1211343247.squirrel@pjama.net>
pjama wrote:
>> Load driver with debug=2 (rmmod dvb-usb-af9015; modprobe dvb-usb-af9015
>> debug=2) and tail -f /var/log/messages to see if there is now some bytes
>> coming from remote.
>
> As mentioned in an earlier response to this post, the above trashes the
> device /dev/input/event7. Is there any way I can boot with debug set?
1) unplug your device
2) make sure new drivers are installed
3) reboot your machine
4) modprobe dvb-usb-af9015 debug=2
5) tail -f /var/log/messages
6) plug stick (now it should start pushing lines to /var/log/messages
(or /var/log/debug) ?)
Remote buttons should now recognized in debug dumps.
> Doing evtest on /dev/input/event7 then pushing remote buttons give me
> nothing. I have confirmed remote/receiver works by booting into windows
> and using vendor supplied app.
It does not work because driver does not have mappings to your remote
controller buttons yet. You should find correct mappings from debug dump
described above.
Antti
--
http://palosaari.fi/
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next prev parent reply other threads:[~2008-05-21 11:41 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-05-19 22:47 [linux-dvb] IR for Afatech 901x pjama
2008-05-19 23:34 ` Antti Palosaari
2008-05-20 1:05 ` pjama
2008-05-20 1:12 ` Antti Palosaari
2008-05-20 2:08 ` Antti Palosaari
2008-05-20 4:02 ` pjama
2008-05-21 4:14 ` pjama
2008-05-21 11:40 ` Antti Palosaari [this message]
2008-05-22 21:53 ` pjama
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=48340A29.6030505@iki.fi \
--to=crope@iki.fi \
--cc=linux-dvb@linuxtv.org \
--cc=pjama@optusnet.com.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox