[linux-dvb] Multiproto annoying compilation error

[linux-dvb] Multiproto annoying compilation error

[Jelle De Loecker]

[-- Attachment #1.1: Type: text/plain, Size: 1174 bytes --]

Hi again,

I've recently declared success on installing the multiproto drivers on 
LinuxMCE 0710 (kubuntu 7.10)
After a lot of hard work, I created a guide which did it like a charm ( 
http://skerit.kipdola.com/?p=5&language=en )

My guide instructs you to use the older multiproto version, which makes 
scan work and all.

Now, I reinstalled linuxmce again, but I mistakenly installed the newer 
multiproto_plus version, like previously, nothing loaded:

    [   76.128799] saa7146: register extension 'budget_ci dvb'.
    [   76.238955] Linux video capture interface: v2.00
    [   76.671737] saa7146: register extension 'dvb'.


No bad, I expected it to load nothing.
So I remove all the modules, I delete every bit of source code, I try to 
use my own guide and I get *absolutely nothing*!

    [  192.299179] saa7146: register extension 'budget_ci dvb'.


I've rebooted so many times I've lost count! I've removed all the 
drivers again, rebooted, reinstalled, it just won't load again!

I refuse to reinstall linuxmce just so I can install the right drivers 
from the beginning.

Does anyone have *any* idea as to why it's not working? I'm really 
getting desperate.


[-- Attachment #1.2: Type: text/html, Size: 1566 bytes --]

[-- Attachment #2: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Multiproto annoying compilation error

[hermann pitton]

Am Freitag, den 23.05.2008, 00:09 +0200 schrieb Jelle De Loecker:
> Hi again,
> 
> I've recently declared success on installing the multiproto drivers on
> LinuxMCE 0710 (kubuntu 7.10)
> After a lot of hard work, I created a guide which did it like a charm
> ( http://skerit.kipdola.com/?p=5&language=en )
> 
> My guide instructs you to use the older multiproto version, which
> makes scan work and all.
> 
> Now, I reinstalled linuxmce again, but I mistakenly installed the
> newer multiproto_plus version, like previously, nothing loaded:
> 
>         [   76.128799] saa7146: register extension 'budget_ci dvb'.
>         [   76.238955] Linux video capture interface: v2.00
>         [   76.671737] saa7146: register extension 'dvb'.
> 
> No bad, I expected it to load nothing.
> So I remove all the modules, I delete every bit of source code, I try
> to use my own guide and I get *absolutely nothing*! 
> 
>         [  192.299179] saa7146: register extension 'budget_ci dvb'.
> 
> I've rebooted so many times I've lost count! I've removed all the
> drivers again, rebooted, reinstalled, it just won't load again! 
> 
> I refuse to reinstall linuxmce just so I can install the right drivers
> from the beginning.
> 
> Does anyone have *any* idea as to why it's not working? I'm really
> getting desperate.

to give something in between totally OT.

As expected, the lame old ATI stuff (the card was not cheap:) is far
beyond to display BBC HD under, oh well, for what we are serviced.

It was totally simple to get it with quite zero BER to the dish and disk
using the thumb, and concerning CPU load for that, a 266 can do I guess.

Are there known versions of mplayer dealing with that BBC HD, or what
one would have to set for the scaling, if the incoming spits errors on a
too small display ;) (comes as 1963x1080)

Cheers,
Hermann







_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

Re: [linux-dvb] Multiproto annoying compilation error

[Jelle De Loecker]

[-- Attachment #1.1: Type: text/plain, Size: 1276 bytes --]

Jelle De Loecker schreef:
> I've recently declared success on installing the multiproto drivers on 
> LinuxMCE 0710 (kubuntu 7.10)
> After a lot of hard work, I created a guide which did it like a charm 
> ( http://skerit.kipdola.com/?p=5&language=en )
> Now, I reinstalled linuxmce again, but I mistakenly installed the 
> newer multiproto_plus version, like previously, nothing loaded:
>
>     [   76.128799] saa7146: register extension 'budget_ci dvb'.
>     [   76.238955] Linux video capture interface: v2.00
>     [   76.671737] saa7146: register extension 'dvb'.
>
> No bad, I expected it to load nothing.
> So I remove all the modules, I delete every bit of source code, I try 
> to use my own guide and I get *absolutely nothing*!
>
>     [  192.299179] saa7146: register extension 'budget_ci dvb'.
>
> I've rebooted so many times I've lost count! I've removed all the 
> drivers again, rebooted, reinstalled, it just won't load again!
> Does anyone have *any* idea as to why it's not working? I'm really 
> getting desperate.
Very weird,

I let LinuxMCE reinstall on it's own tonight (as I don't really have a 
choice, and it goes quite fast, thank god)
and now I followed my own guide from the beginning and still nothing! I 
have NO idea where it's going wrong...

[-- Attachment #1.2: Type: text/html, Size: 1782 bytes --]

[-- Attachment #2: Type: text/plain, Size: 150 bytes --]

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb