Re: [linux-dvb] CAM of Mantis 2033 still not working

[Manu Abraham <abraham.manu@gmail.com>]

Ruediger Dohmhardt wrote:
> Manu Abraham schrieb:
>> Ruediger Dohmhardt wrote:
>>  
>>> Dear Manu,
>>>
>>> the code from
>>>
>>> http://jusst.de/hg/mantis (10.5.08)
>>>
>>> now works fine for the 2033 without the CAM (here Alphacrypt Light)
>>> inserted.
>>>
>>> When I insert the CAM, audio and video stop. I need to remove the CAM
>>> and  I must  reload the module with
>>>
>>>    modprobe -r mantis
>>>
>>> followed by
>>>
>>>    modprobe mantis
>>>
>>> Could you please look into the attached /var/log/messages file.
>>> Maybe it could provide a hint, what's still wrong.
>>>
>>> The verbose level is set to 3 (options mantis verbose=3)
>>>     
>>
>>
>> Applied some changes, couldn't test the changes while being away, but
>> only build tests. Please do test again, also feel free to play with the
>> individual changesets as to check for various stage tests.
>>   
> Dear Manu,
> 
> all changesets from Saturday night did not recognize the CAM.
> I could, though, keep the Alphacrypt-Light plugged, but vdr-1.4.7
> provided only TV from the unencrypted channels.
> vdr's CAM menu could not access the CAM.
> 
> changeset 7325b14e79e460fc (Monday evening):
> Unencrypted channels: ok:
> When I zap to an encrypted one, the drive hangs as shown below.
> Then I need to reboot the machine, because
>      modprobe -r mantis
> 
> could not really unload the module.


Can you please test again ?

Regards,
Manu

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb