public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: postfix@au-79.de
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] Problems with WinTV Nova T by Hauppauge USB-stick (id: 2040:7070)
Date: Sat, 31 May 2008 16:52:43 +0200	[thread overview]
Message-ID: <4841663B.5080105@au-79.de> (raw)

Hi,

a view days ago I bought a dvb-USB stick from Hauppauge (WinTV Nova T). 
I want to use this stick with linux, but I sill have some trubble.
After a google-search it is clear, that the correct driver is dib0700, 
and the firmware to use is  dvb-usb-dib0700-1.10.fw (md5: 
5878ebfcba2d8deb90b9120eb89b02da)
Kernel is 2.6.25

lsusb:
2040:7070 Hauppauge

If I want to tune to a channel (e.g. with kaffine) the dmesg-log is 
overcrowed with "DiB0070 I2C write failed" and there is no sucessfull 
tuning. The output of kaffeine while searching a channel is:

Using DVB device 0:0 "DiBcom 7000PC"
tuning DVB-T to 402000000 Hz
inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
. LOCKED.
Transponders: 1/63

Invalid section length or timeout: pid=17

Frontend closed
Using DVB device 0:0 "DiBcom 7000PC"
tuning DVB-T to 410000000 Hz
inv:2 bw:0 fecH:9 fecL:9 mod:6 tm:2 gi:4 hier:4
. LOCKED.
Transponders: 2/63

Invalid section length or timeout: pid=17
.... <and so on>

The output of dmesg while attaching the stick and searching with 
kaffeine and debug enabled is:

usb 1-6: new high speed USB device using ehci_hcd and address 6
usb 1-6: configuration #1 chosen from 1 choice
dvb-usb: found a 'Hauppauge Nova-T Stick' in cold state, will try to 
load a firmware
dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw'
dib0700: firmware started successfully.
dvb-usb: found a 'Hauppauge Nova-T Stick' in warm state.
i2c-adapter i2c-0: SMBus Quick command not supported, can't probe for chips
dvb-usb: will pass the complete MPEG2 transport stream to the software 
demuxer.
DVB: registering new adapter (Hauppauge Nova-T Stick)
i2c-adapter i2c-1: SMBus Quick command not supported, can't probe for chips
DVB: registering frontend 0 (DiBcom 7000PC)...
DiB0070: Revision: 3
DiB0070 I2C write failed
DiB0070 I2C write failed
DiB0070 I2C write failed
DiB0070: CTRL_LO5: 0x16a4
DiB0070 I2C write failed
DiB0070 I2C write failed
DiB0070 I2C write failed
DiB0070 I2C write failed
DiB0070 I2C read failed
DiB0070 I2C write failed
DiB0070: WBDStart = 0 (Vargen) - FF = 0
DiB0070: successfully identified
input: IR-receiver inside an USB DVB receiver as /class/input/input11
dvb-usb: schedule remote query interval to 150 msecs.
dvb-usb: Hauppauge Nova-T Stick successfully initialized and connected.
usb 1-6: New USB device found, idVendor=2040, idProduct=7070
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: Nova-T Stick
usb 1-6: Manufacturer: Hauppauge
usb 1-6: SerialNumber: 4030980792
DiB0070: Tuning for Band: 2 (402000 kHz)
DiB0070 I2C write failed
DiB0070 I2C read failed
DiB0070 I2C write failed
DiB0070: HFDIV code: 5
DiB0070: VCO = 1
DiB0070: VCOF in kHz: 4824000 ((6*402000) << 1))
DiB0070: REFDIV: 1, FREF: 12000
DiB0070: FBDIV: 67, Rest: 0
DiB0070: Num: 0, Den: 1, SD: 0
DiB0070 I2C write failed
DiB0070 I2C write failed
DiB0070 I2C write failed
DiB0070 I2C write failed
DiB0070 I2C write failed
DiB0070 I2C write failed
DiB0070 I2C write failed
DiB0070 I2C write failed
DiB0070 I2C read failed
DiB0070: CAPTRIM=64; ADC = 0 (ADC) & 0mV
DiB0070: CAPTRIM=64 is closer to target (400/3000)
DiB0070 I2C write failed
DiB0070 I2C read failed
DiB0070: CAPTRIM=96; ADC = 0 (ADC) & 0mV
<and so on...>

Here some more information about the stick:

lsusb -vvvv:

Bus 001 Device 006: ID 2040:7070 Hauppauge
Device Descriptor:
   bLength                18
   bDescriptorType         1
   bcdUSB               2.00
   bDeviceClass            0 (Defined at Interface level)
   bDeviceSubClass         0
   bDeviceProtocol         0
   bMaxPacketSize0        64
   idVendor           0x2040 Hauppauge
   idProduct          0x7070
   bcdDevice            1.00
   iManufacturer           1
   iProduct                2
   iSerial                 3
   bNumConfigurations      1
   Configuration Descriptor:
     bLength                 9
     bDescriptorType         2
     wTotalLength           46
     bNumInterfaces          1
     bConfigurationValue     1
     iConfiguration          0
     bmAttributes         0xa0
       (Bus Powered)
       Remote Wakeup
     MaxPower              500mA
     Interface Descriptor:
       bLength                 9
       bDescriptorType         4
       bInterfaceNumber        0
       bAlternateSetting       0
       bNumEndpoints           4
       bInterfaceClass       255 Vendor Specific Class
       bInterfaceSubClass      0
       bInterfaceProtocol      0
       iInterface              0
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x01  EP 1 OUT
         bmAttributes            2
           Transfer Type            Bulk
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0200  1x 512 bytes
         bInterval               1
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x81  EP 1 IN
         bmAttributes            2
           Transfer Type            Bulk
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0200  1x 512 bytes
         bInterval               1
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x82  EP 2 IN
         bmAttributes            2
           Transfer Type            Bulk
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0200  1x 512 bytes
         bInterval               1
       Endpoint Descriptor:
         bLength                 7
         bDescriptorType         5
         bEndpointAddress     0x83  EP 3 IN
         bmAttributes            2
           Transfer Type            Bulk
           Synch Type               None
           Usage Type               Data
         wMaxPacketSize     0x0200  1x 512 bytes
         bInterval               1
can't get device qualifier: Operation not permitted
can't get debug descriptor: Operation not permitted
cannot read device status, Operation not permitted (1)


Thanks for your assistance. If you need any further informations or 
tests, please let me know.

Best regards

Robert

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

             reply	other threads:[~2008-05-31 14:52 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-05-31 14:52 postfix [this message]
2008-07-11 15:17 ` [linux-dvb] Problems with WinTV Nova T by Hauppauge USB-stick (id: 2040:7070) postfix

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=4841663B.5080105@au-79.de \
    --to=postfix@au-79.de \
    --cc=linux-dvb@linuxtv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox