From: matthieu castet <castet.matthieu@free.fr>
To: linux-dvb@linuxtv.org
Subject: [linux-dvb] [PATCH] Support faulty USB IDs on DIBUSB_MC
Date: Sat, 07 Jun 2008 13:36:51 +0200 [thread overview]
Message-ID: <484A72D3.7070500@free.fr> (raw)
[-- Attachment #1: Type: text/plain, Size: 344 bytes --]
Hi,
I got a LITE-ON USB2.0 DVB-T Tuner that loose it's cold state vid/pid
and got FX2 dev kit one (0x04b4, 0x8613).
This patch introduce an option similar to the DVB_USB_DIBUSB_MB_FAULTY :
it add the FX2 dev kit ids to the DIBUSB_MC driver if
DVB_USB_DIBUSB_MC_FAULTY is selected.
Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
[-- Attachment #2: dib3000c_faulty_id --]
[-- Type: text/plain, Size: 2565 bytes --]
diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig
index f00a0eb..a656b9b 100644
--- a/drivers/media/dvb/dvb-usb/Kconfig
+++ b/drivers/media/dvb/dvb-usb/Kconfig
@@ -68,6 +68,12 @@ config DVB_USB_DIBUSB_MC
Say Y if you own such a device and want to use it. You should build it as
a module.
+config DVB_USB_DIBUSB_MC_FAULTY
+ bool "Support faulty USB IDs"
+ depends on DVB_USB_DIBUSB_MC
+ help
+ Support for faulty USB IDs due to an invalid EEPROM on some LITE-ON devices.
+
config DVB_USB_DIB0700
tristate "DiBcom DiB0700 USB DVB devices (see help for supported devices)"
depends on DVB_USB
diff --git a/drivers/media/dvb/dvb-usb/dibusb-mc.c b/drivers/media/dvb/dvb-usb/dibusb-mc.c
index 059cec9..ab5766a 100644
--- a/drivers/media/dvb/dvb-usb/dibusb-mc.c
+++ b/drivers/media/dvb/dvb-usb/dibusb-mc.c
@@ -42,6 +42,17 @@ static struct usb_device_id dibusb_dib3000mc_table [] = {
/* 11 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ARTEC_T14_WARM) },
/* 12 */ { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_COLD) },
/* 13 */ { USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_WARM) },
+/*
+ * XXX: Some LITE-ON devices seem to loose their id after some time. Bad EEPROM ???.
+ * We don't catch these faulty IDs (namely 'Cypress FX2 USB controller') that
+ * have been left on the device. If you don't have such a device but an LITE-ON
+ * device that's supposed to work with this driver but is not detected by it,
+ * free to enable CONFIG_DVB_USB_DIBUSB_MC_FAULTY via your kernel config.
+ */
+
+#ifdef CONFIG_DVB_USB_DIBUSB_MC_FAULTY
+/* 14 */ { USB_DEVICE(USB_VID_CYPRESS, USB_PID_ULTIMA_TVBOX_USB2_FX_COLD) },
+#endif
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, dibusb_dib3000mc_table);
@@ -88,7 +99,11 @@ static struct dvb_usb_device_properties dibusb_mc_properties = {
.generic_bulk_ctrl_endpoint = 0x01,
+#ifdef CONFIG_DVB_USB_DIBUSB_MC_FAULTY
+ .num_device_descs = 8,
+#else
.num_device_descs = 7,
+#endif
.devices = {
{ "DiBcom USB2.0 DVB-T reference design (MOD3000P)",
{ &dibusb_dib3000mc_table[0], NULL },
@@ -119,6 +134,13 @@ static struct dvb_usb_device_properties dibusb_mc_properties = {
{ &dibusb_dib3000mc_table[12], NULL },
{ &dibusb_dib3000mc_table[13], NULL },
},
+#ifdef CONFIG_DVB_USB_DIBUSB_MC_FAULTY
+ { "LITE-ON USB2.0 DVB-T Tuner (faulty USB IDs)",
+ /* Also rebranded as Intuix S800, Toshiba */
+ { &dibusb_dib3000mc_table[14], NULL },
+ { NULL },
+ },
+#endif
{ NULL },
}
};
[-- Attachment #3: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next reply other threads:[~2008-06-07 11:37 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-07 11:36 matthieu castet [this message]
2009-01-19 20:38 ` [PATCH] Support faulty USB IDs on DIBUSB_MC matthieu castet
2009-01-29 9:47 ` Mauro Carvalho Chehab
2009-01-29 10:19 ` Patrick Boettcher
2009-01-29 12:05 ` Mauro Carvalho Chehab
2009-01-29 13:08 ` Patrick Boettcher
2009-01-29 13:34 ` Mauro Carvalho Chehab
2009-01-29 20:05 ` matthieu castet
2009-01-29 20:46 ` matthieu castet
2009-02-09 19:40 ` matthieu castet
2009-02-09 19:44 ` [linux-dvb] " Devin Heitmueller
2009-02-09 20:16 ` matthieu castet
2009-02-09 20:32 ` Devin Heitmueller
2009-02-09 19:51 ` Devin Heitmueller
2009-05-16 13:08 ` [PATCH] DIBUSB_MC : fix i2c to not corrupt eeprom in case of strange read pattern matthieu castet
2009-05-20 8:42 ` Patrick Boettcher
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=484A72D3.7070500@free.fr \
--to=castet.matthieu@free.fr \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox