From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from aa011msr.fastwebnet.it ([85.18.95.71]) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1K8cWo-0004Hy-9H for linux-dvb@linuxtv.org; Tue, 17 Jun 2008 16:51:23 +0200 Received: from [192.168.0.12] (37.244.170.61) by aa011msr.fastwebnet.it (8.0.013.5) id 483216FE03985CC3 for linux-dvb@linuxtv.org; Tue, 17 Jun 2008 16:50:48 +0200 Message-ID: <4857CF5A.4030909@punkrockworld.it> Date: Tue, 17 Jun 2008 16:51:06 +0200 From: Francesco MIME-Version: 1.0 To: linux-dvb@linuxtv.org References: <485638CE.6020406@punkrockworld.it> In-Reply-To: <485638CE.6020406@punkrockworld.it> Subject: Re: [linux-dvb] Firmware error for Asus MyCinema P7131H (NXP) List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: Francesco ha scritto: > Hi, > I've a problem with new version of MyCinema 7131H, one with NXP chip > (saa7131E, tda10046A). > > On boot, system fail to load firmware for tda10046, showing a wrong > firmware revision number (normally 80, but sometimes other numbers). > > If I reboot (not shutdown & power up!), or if I unload all saa7134* > modules from memory and reload saa7134-dvb, firmware is loaded correctly > with revision 20... > > Note: I never had this problem with old Philips-brand Asus P7131H. > > > thanks in advance, > Francesco Ferrario > > IT Manager Chimera project > www.chimeratv.it After reading "unstable tda1004x firmware loading", I've found a little workaround (not a solution, but...) for this problem... Simply adding "saa7134-dvb" to /etc/modules, make a successful firmware loading on boot. (My system is an Ubuntu 7.10) Francesco Ferrario - Chimera project - - www.chimeratv.it - _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb