From: Antti Palosaari <crope@iki.fi>
To: Andrew Websdale <websdaleandrew@googlemail.com>
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] Dposh DVB-T USB2.0(ULi M9207) initialising OK but no response from scan
Date: Wed, 02 Jul 2008 14:51:14 +0300 [thread overview]
Message-ID: <486B6BB2.7060708@iki.fi> (raw)
In-Reply-To: <e37d7f810807020442q13107177n5a90b11faf51194d@mail.gmail.com>
terve Andrew,
Andrew Websdale wrote:
> Hi All,
>
> I've been trying to amend the M920x driver to cope with the MT2060
> tuner. My dmesg output looks encouraging :
> usb 5-1: new high speed USB device using ehci_hcd and address 5
> usb 5-1: configuration #1 chosen from 1 choice
> Probing for m920x device at interface 0
> dvb-usb: found a 'Dposh(mt2060 tuner) DVB-T USB2.0' in warm state.
> dvb-usb: will pass the complete MPEG2 transport stream to the software
> demuxer.
> DVB: registering new adapter (Dposh(mt2060 tuner) DVB-T USB2.0)
> m920x_mt352_frontend_attach
> DVB: registering frontend 0 (Zarlink MT352 DVB-T)...
> m920x_mt2060_tuner_attach
> MT2060: successfully identified (IF1 = 1220)
> dvb-usb: Dposh(mt2060 tuner) DVB-T USB2.0 successfully initialized and
> connected.
>
> but scanning produces no result. I thought it might be the firmware so I
> used USBSnoop ( ver 2.0 from here
> <http://www.pcausa.com/Utilities/UsbSnoop/SniffUSB-x86-2.0.0006.zip> ,
> I think its slightly easier to use than the original) and extracted a
> new firmware file (attached) . The firmware loaded without complaint,
> but still no scan result. I'm a bit stuck now, anyone got any
> suggestions as to how I should proceed?
I have following list to check:
1) firmware (you tested this one already)
2) demodulator (it is MT352 I think, but configuration / settings could
be wrong)
3) wrong endpoint used for mpeg ts
I can help if you take sniffs with usbsnoop, but hopefully you will find
error yourself.
http://benoit.papillault.free.fr/usbsnoop/
regards
Antti
--
http://palosaari.fi/
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next prev parent reply other threads:[~2008-07-02 11:51 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-02 11:42 [linux-dvb] Dposh DVB-T USB2.0(ULi M9207) initialising OK but no response from scan Andrew Websdale
2008-07-02 11:51 ` Antti Palosaari [this message]
2008-07-02 12:28 ` Andrew Websdale
2008-07-02 13:05 ` Antti Palosaari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=486B6BB2.7060708@iki.fi \
--to=crope@iki.fi \
--cc=linux-dvb@linuxtv.org \
--cc=websdaleandrew@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox