From: Hans de Goede <j.w.r.degoede@hhs.nl>
To: Jean-Francois Moine <moinejf@free.fr>
Cc: video4linux-list@redhat.com
Subject: PATCH: gspca-mercurial: fix debugging output
Date: Wed, 02 Jul 2008 23:25:49 +0200 [thread overview]
Message-ID: <486BF25D.5090005@hhs.nl> (raw)
[-- Attachment #1: Type: text/plain, Size: 142 bytes --]
Hi All,
This patch makes CONFIG_VIDEO_ADV_DEBUG actually work for gspca
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
Regards,
Hans
[-- Attachment #2: gspca-fix-debug.patch --]
[-- Type: text/x-patch, Size: 3355 bytes --]
Make CONFIG_VIDEO_ADV_DEBUG actually work for gspca
Signed-off-by: Hans de Goede <j.w.r.degoede@hhs.nl>
--- gspca-2bbb47f61a95/linux/drivers/media/video/gspca/gspca.c.dbg 2008-07-02 11:14:56.000000000 +0200
+++ gspca-2bbb47f61a95/linux/drivers/media/video/gspca/gspca.c 2008-07-02 20:02:12.000000000 +0200
@@ -50,7 +50,7 @@ static int video_nr = -1;
static int comp_fac = 30; /* Buffer size ratio when compressed in % */
-#ifdef VIDEO_ADV_DEBUG
+#ifdef CONFIG_VIDEO_ADV_DEBUG
int gspca_debug = D_ERR | D_PROBE;
EXPORT_SYMBOL(gspca_debug);
@@ -823,7 +823,7 @@ static int try_fmt_vid_cap(struct gspca_
/* (luvcview problem) */
if (fmt->fmt.pix.pixelformat == V4L2_PIX_FMT_MJPEG)
fmt->fmt.pix.pixelformat = V4L2_PIX_FMT_JPEG;
-#ifdef VIDEO_ADV_DEBUG
+#ifdef CONFIG_VIDEO_ADV_DEBUG
if (gspca_debug & D_CONF)
PDEBUG_MODE("try fmt cap", fmt->fmt.pix.pixelformat, w, h);
#endif
@@ -843,7 +843,7 @@ static int try_fmt_vid_cap(struct gspca_
/* no chance, return this mode */
fmt->fmt.pix.pixelformat =
gspca_dev->cam.cam_mode[mode].pixfmt;
-#ifdef VIDEO_ADV_DEBUG
+#ifdef CONFIG_VIDEO_ADV_DEBUG
if (gspca_debug & D_CONF) {
PDEBUG_MODE("new format",
fmt->fmt.pix.pixelformat,
@@ -958,7 +958,7 @@ static int dev_open(struct inode *inode,
}
gspca_dev->users++;
file->private_data = gspca_dev;
-#ifdef VIDEO_ADV_DEBUG
+#ifdef CONFIG_VIDEO_ADV_DEBUG
/* activate the v4l2 debug */
if (gspca_debug & D_V4L2)
gspca_dev->vdev.debug |= 3;
@@ -1231,7 +1231,7 @@ static int vidioc_streamon(struct file *
if (ret < 0)
goto out;
}
-#ifdef VIDEO_ADV_DEBUG
+#ifdef CONFIG_VIDEO_ADV_DEBUG
if (gspca_debug & D_STREAM) {
PDEBUG_MODE("stream on OK",
gspca_dev->pixfmt,
@@ -1986,7 +1986,7 @@ static void __exit gspca_exit(void)
module_init(gspca_init);
module_exit(gspca_exit);
-#ifdef VIDEO_ADV_DEBUG
+#ifdef CONFIG_VIDEO_ADV_DEBUG
module_param_named(debug, gspca_debug, int, 0644);
MODULE_PARM_DESC(debug,
"Debug (bit) 0x01:error 0x02:probe 0x04:config"
--- gspca-2bbb47f61a95/linux/drivers/media/video/gspca/gspca.h.dbg 2008-07-02 11:14:56.000000000 +0200
+++ gspca-2bbb47f61a95/linux/drivers/media/video/gspca/gspca.h 2008-07-02 20:10:16.000000000 +0200
@@ -28,7 +28,7 @@
#define V4L2_CID_SHARPNESS (V4L2_CID_BASE+27)
#endif
-#ifdef VIDEO_ADV_DEBUG
+#ifdef CONFIG_VIDEO_ADV_DEBUG
/* GSPCA our debug messages */
extern int gspca_debug;
#define PDEBUG(level, fmt, args...) \
--- gspca-2bbb47f61a95/linux/drivers/media/video/gspca/zc3xx.c.dbg 2008-07-02 11:14:56.000000000 +0200
+++ gspca-2bbb47f61a95/linux/drivers/media/video/gspca/zc3xx.c 2008-07-02 20:02:13.000000000 +0200
@@ -6436,7 +6436,7 @@ static void setcontrast(struct gspca_dev
0, Tgradient_1, Tgradient_2,
Tgradient_3, Tgradient_4, Tgradient_5, Tgradient_6
};
-#ifdef VIDEO_ADV_DEBUG
+#ifdef CONFIG_VIDEO_ADV_DEBUG
__u8 v[16];
#endif
@@ -6454,7 +6454,7 @@ static void setcontrast(struct gspca_dev
else if (g <= 0)
g = 1;
reg_w(dev, g, 0x0120 + i); /* gamma */
-#ifdef VIDEO_ADV_DEBUG
+#ifdef CONFIG_VIDEO_ADV_DEBUG
if (gspca_debug & D_CONF)
v[i] = g;
#endif
@@ -6474,7 +6474,7 @@ static void setcontrast(struct gspca_dev
g = 1;
}
reg_w(dev, g, 0x0130 + i); /* gradient */
-#ifdef VIDEO_ADV_DEBUG
+#ifdef CONFIG_VIDEO_ADV_DEBUG
if (gspca_debug & D_CONF)
v[i] = g;
#endif
[-- Attachment #3: Type: text/plain, Size: 164 bytes --]
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
reply other threads:[~2008-07-02 21:19 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=486BF25D.5090005@hhs.nl \
--to=j.w.r.degoede@hhs.nl \
--cc=moinejf@free.fr \
--cc=video4linux-list@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox