From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail.kapsi.fi ([217.30.184.167] ident=Debian-exim) by www.linuxtv.org with esmtp (Exim 4.63) (envelope-from ) id 1KEMie-0005Ja-CY for linux-dvb@linuxtv.org; Thu, 03 Jul 2008 13:11:21 +0200 Message-ID: <486CB3D2.3000702@iki.fi> Date: Thu, 03 Jul 2008 14:11:14 +0300 From: Antti Palosaari MIME-Version: 1.0 To: Alistair M References: <486B3617.3070702@iki.fi> In-Reply-To: Cc: linux-dvb@linuxtv.org Subject: Re: [linux-dvb] Leadtek WinFast DTV Dongle Gold Remote issues List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: linux-dvb-bounces@linuxtv.org Errors-To: linux-dvb-bounces+mchehab=infradead.org@linuxtv.org List-ID: Alistair M wrote: > Hello Antii, > > I've attached the usb snoop. I hope I did it correctly. It was correct :) I added IR-code table to the driver. Now we should find correct keys for those codes. 1) install driver from http://linuxtv.org/hg/~anttip/af9015-new/ (make & make install; make rmmod; tail -100f /var/log/messages) 2) it should print remote codes to the message log when you press remote keys. Write down which key gives which code. Here is example what it should output to the message-log when key is pressed; af9015_rc_query: 00 00 1e 00 00 00 00 00 af9015_rc_query: 00 00 1f 00 00 00 00 00 af9015_rc_query: 00 00 20 00 00 00 00 00 af9015_rc_query: 00 00 21 00 00 00 00 00 report like: number 1 = af9015_rc_query: 00 00 1f 00 00 00 00 00 channel up = af9015_rc_query: 00 00 1f 00 00 00 00 00 volume down = af9015_rc_query: 00 00 20 00 00 00 00 00 > Thank you so much for this. > > Regards, > Alistair. regards Antti -- http://palosaari.fi/ _______________________________________________ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb