public inbox for linux-media@vger.kernel.org
 help / color / mirror / Atom feed
From: Adam <sph3r3@internode.on.net>
To: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] DVICO FusionHDTV DVB-T Pro
Date: Fri, 04 Jul 2008 08:00:24 +0930	[thread overview]
Message-ID: <486D5300.5010901@internode.on.net> (raw)
In-Reply-To: <486A57A2.8060904@gimpelevich.san-francisco.ca.us>

Daniel Gimpelevich wrote:

[...snip...]

> OK, after applying the patch and replacing the card definition, please 
> try under Linux everything you did under Windows, so that you may report 
> back any observable differences between the two. While they might not 
> all be taken care of in the short term, a catalog of them now would be a 
> resource for future improvements.

Daniel,

I've updated to head, applied the patch and replaced the card 
definition.  The behaviour of failing to tune is still the same.  dmesg 
still says "cx88[0]: Error: Calling callback for tuner 4".

Trying to use vlc to view analog TV, composite or svideo resulted in 
messages similar to the following in dmesg:

> Jul  4 07:56:24 localhost kernel: cx88[0]: video y / packed - dma channel status dump
> Jul  4 07:56:24 localhost kernel: cx88[0]:   cmds: initial risc: 0x10901000
> Jul  4 07:56:24 localhost kernel: cx88[0]:   cmds: cdt base    : 0x00180440
> Jul  4 07:56:24 localhost kernel: cx88[0]:   cmds: cdt size    : 0x0000000c
> Jul  4 07:56:24 localhost kernel: cx88[0]:   cmds: iq base     : 0x00180400
> Jul  4 07:56:24 localhost kernel: cx88[0]:   cmds: iq size     : 0x00000010
> Jul  4 07:56:24 localhost kernel: cx88[0]:   cmds: risc pc     : 0x10901034
> Jul  4 07:56:24 localhost kernel: cx88[0]:   cmds: iq wr ptr   : 0x0000010d
> Jul  4 07:56:24 localhost kernel: cx88[0]:   cmds: iq rd ptr   : 0x00000101
> Jul  4 07:56:24 localhost kernel: cx88[0]:   cmds: cdt current : 0x00000448
> Jul  4 07:56:24 localhost kernel: cx88[0]:   cmds: pci target  : 0x00000000
> Jul  4 07:56:24 localhost kernel: cx88[0]:   cmds: line / byte : 0x00000000
> Jul  4 07:56:24 localhost kernel: cx88[0]:   risc0: 0x80008000 [ sync resync count=0 ]
> Jul  4 07:56:24 localhost kernel: cx88[0]:   risc1: 0x1c0003c0 [ write sol eol count=960 ]
> Jul  4 07:56:24 localhost kernel: cx88[0]:   risc2: 0x1088d000 [ arg #1 ]
> Jul  4 07:56:24 localhost kernel: cx88[0]:   risc3: 0x1c0003c0 [ write sol eol count=960 ]
> Jul  4 07:56:24 localhost kernel: cx88[0]:   iq 0: 0x80008000 [ sync resync count=0 ]
> Jul  4 07:56:24 localhost kernel: cx88[0]:   iq 1: 0x1c0003c0 [ write sol eol count=960 ]
> Jul  4 07:56:24 localhost kernel: cx88[0]:   iq 2: 0x1088d000 [ arg #1 ]
> Jul  4 07:56:24 localhost kernel: cx88[0]:   iq 3: 0x1c0003c0 [ write sol eol count=960 ]
> Jul  4 07:56:24 localhost kernel: cx88[0]:   iq 4: 0x1088d780 [ arg #1 ]
> Jul  4 07:56:24 localhost kernel: cx88[0]:   iq 5: 0x18000100 [ write sol count=256 ]
> Jul  4 07:56:24 localhost kernel: cx88[0]:   iq 6: 0x1088df00 [ arg #1 ]
> Jul  4 07:56:24 localhost kernel: cx88[0]:   iq 7: 0x140002c0 [ write eol count=704 ]
> Jul  4 07:56:24 localhost kernel: cx88[0]:   iq 8: 0x1088c000 [ arg #1 ]
> Jul  4 07:56:24 localhost kernel: cx88[0]:   iq 9: 0x1c0003c0 [ write sol eol count=960 ]
> Jul  4 07:56:24 localhost kernel: cx88[0]:   iq a: 0x1088c680 [ arg #1 ]
> Jul  4 07:56:24 localhost kernel: cx88[0]:   iq b: 0x18000200 [ write sol count=512 ]
> Jul  4 07:56:24 localhost kernel: cx88[0]:   iq c: 0x1088ce00 [ arg #1 ]
> Jul  4 07:56:24 localhost kernel: cx88[0]:   iq d: 0x7248ca28 [ jump irq2 22 19 resync 14 count=2600 ]
> Jul  4 07:56:24 localhost kernel: cx88[0]:   iq e: 0x72377f63 [ arg #1 ]
> Jul  4 07:56:24 localhost kernel: cx88[0]:   iq f: 0x03b40a5b [ INVALID irq2 irq1 23 21 20 18 count=2651 ]
> Jul  4 07:56:24 localhost kernel: cx88[0]: fifo: 0x00180c00 -> 0x183400
> Jul  4 07:56:24 localhost kernel: cx88[0]: ctrl: 0x00180400 -> 0x180460
> Jul  4 07:56:24 localhost kernel: cx88[0]:   ptr1_reg: 0x001812a8
> Jul  4 07:56:24 localhost kernel: cx88[0]:   ptr2_reg: 0x00180458
> Jul  4 07:56:24 localhost kernel: cx88[0]:   cnt1_reg: 0x00000064
> Jul  4 07:56:24 localhost kernel: cx88[0]:   cnt2_reg: 0x00000000
> Jul  4 07:56:24 localhost kernel: cx88[0]/0: [ebfe9e40/0] timeout - dma=0x10901000
> Jul  4 07:56:24 localhost kernel: cx88[0]/0: [ebfe99c0/1] timeout - dma=0x1097b000

Adam

_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb

  reply	other threads:[~2008-07-03 22:30 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-28  3:35 [linux-dvb] DVICO FusionHDTV DVB-T Pro Adam
     [not found] ` <486966E8.3050509@internode.on.net>
2008-07-01 16:13   ` Daniel Gimpelevich
2008-07-03 22:30     ` Adam [this message]
2008-07-05  8:53       ` Daniel Gimpelevich
  -- strict thread matches above, loose matches on Subject: below --
2008-06-27  1:16 Adam
2008-06-27  2:10 ` Daniel Gimpelevich

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=486D5300.5010901@internode.on.net \
    --to=sph3r3@internode.on.net \
    --cc=daniel@gimpelevich.san-francisco.ca.us \
    --cc=linux-dvb@linuxtv.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox