From: D <therealisttruest@gmail.com>
To: video4linux-list@redhat.com
Subject: Help with Chinese card
Date: Sat, 05 Jul 2008 14:10:16 -0800 [thread overview]
Message-ID: <486FF148.2060506@gmail.com> (raw)
Anyone,
Firstly, let me state I'm not a total noob to Linux, but have only
recompiled a kernel once or twice and then couldn't have done so without
a decent step by step guide. I'm a programmer, but not a good one yet as
I'm still learning a lot. So on to my problem.....
I was working on this for an associate of mine who is across the country
so I have somewhat limited access to the machine with the card on it. I
have tried a couple module recompilations with a possible addition for
this card, but with no real success.
It's a LE-8008A from Shenzhen Rare Numeral Science bought on EBay and it
appears to be an SAA7134 card. Based on a previous posting on the
mailing list, I've made changes to the saa7134-cards.c and saa7134.h
below, but with little success(the previous user evidently used RegSpy
in Windows, but I don't have access to that)--
[SAA7134_BOARD_AOP_8008A_16_PORT] = {/*added definition*/
.name = "AOPVision AOP-8008A 16CH/240fps Capture Card",
.audio_clock = 0x00187de7,
.tuner_type = TUNER_ABSENT,
.radio_type = UNSET,
.tuner_addr = ADDR_UNSET,
.radio_addr = ADDR_UNSET,
.inputs = {{
.name = name_comp1,
.gpio = 0xe3c00,
.vmux = 0,
},{
.name = name_comp2,
.gpio = 0xe3c00,
.vmux = 2,
}},
Here's some pertinent info-
lspci
04:08.0 Multimedia controller: Philips Semiconductors SAA7130 Video
Broadcast Decoder (rev 01)
04:09.0 Multimedia controller: Philips Semiconductors SAA7130 Video
Broadcast Decoder (rev 01)
04:0a.0 Multimedia controller: Philips Semiconductors SAA7130 Video
Broadcast Decoder (rev 01)
04:0b.0 Multimedia controller: Philips Semiconductors SAA7130 Video
Broadcast Decoder (rev 01)
04:0c.0 Multimedia controller: Philips Semiconductors SAA7130 Video
Broadcast Decoder (rev 01)
04:0d.0 Multimedia controller: Philips Semiconductors SAA7130 Video
Broadcast Decoder (rev 01)
04:0e.0 Multimedia controller: Philips Semiconductors SAA7130 Video
Broadcast Decoder (rev 01)
04:0f.0 Multimedia controller: Philips Semiconductors SAA7130 Video
Broadcast Decoder (rev 01)
lspci -vn
04:08.0 0480: 1131:7130 (rev 01)
Subsystem: 1131:0000
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [40] Power Management version 1
04:09.0 0480: 1131:7130 (rev 01)
Subsystem: 1131:0000
Flags: bus master, medium devsel, latency 64, IRQ 22
Memory at febff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [40] Power Management version 1
04:0a.0 0480: 1131:7130 (rev 01)
Subsystem: 1131:0000
Flags: bus master, medium devsel, latency 64, IRQ 17
Memory at febff400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [40] Power Management version 1
04:0b.0 0480: 1131:7130 (rev 01)
Subsystem: 1131:0000
Flags: bus master, medium devsel, latency 64, IRQ 23
Memory at febff000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [40] Power Management version 1
04:0c.0 0480: 1131:7130 (rev 01)
Subsystem: 1131:0000
Flags: bus master, medium devsel, latency 64, IRQ 21
Memory at febfec00 (32-bit, non-prefetchable) [size=1K]
Capabilities: [40] Power Management version 1
04:0d.0 0480: 1131:7130 (rev 01)
Subsystem: 1131:0000
Flags: bus master, medium devsel, latency 64, IRQ 22
Memory at febfe800 (32-bit, non-prefetchable) [size=1K]
Capabilities: [40] Power Management version 1
04:0e.0 0480: 1131:7130 (rev 01)
Subsystem: 1131:0000
Flags: bus master, medium devsel, latency 64, IRQ 17
Memory at febfe400 (32-bit, non-prefetchable) [size=1K]
Capabilities: [40] Power Management version 1
04:0f.0 0480: 1131:7130 (rev 01)
Subsystem: 1131:0000
Flags: bus master, medium devsel, latency 64, IRQ 23
Memory at febfe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [40] Power Management version 1
Any advice on what to do next or any questions for me to help clarify?
Thanks in advance!
Daniel
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
next reply other threads:[~2008-07-05 22:10 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-05 22:10 D [this message]
2008-07-05 22:48 ` Help with Chinese card hermann pitton
2008-07-05 23:15 ` D
2008-07-06 1:00 ` D
2008-07-06 11:30 ` hermann pitton
2008-07-07 1:10 ` D
2008-07-07 19:41 ` hermann pitton
2008-07-21 5:48 ` D
2008-07-30 6:03 ` D
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=486FF148.2060506@gmail.com \
--to=therealisttruest@gmail.com \
--cc=video4linux-list@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox