* [linux-dvb] Terratec Cinergy S PCI
@ 2008-07-03 9:21 Julian Picht
2008-07-13 13:52 ` Julian Picht
0 siblings, 1 reply; 3+ messages in thread
From: Julian Picht @ 2008-07-03 9:21 UTC (permalink / raw)
To: linux-dvb
Hi List.
I recently bought a Terratec Cinergy S PCI which uses a Conexant CX2388x
chip as it's PCI Interface and a Fujitsu MB86A16 as it's frontend.
I modified the cx88 files to recognize this card. Now I need a some
pointers how to attach the MB86A16 frontend (which is included in mantis
source, i think) to the cx88 and how to obtain the right i2c adresses etc.
Is there any documentation on how to do that?
I would be very happy to contribute to the great work you do and already
did.
--------------------------------------
# lspci -vvnn
04:01.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI
Video and Audio Decoder [14f1:8800] (rev 05)
Subsystem: TERRATEC Electronic GmbH Device [153b:117a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel driver in use: cx8800
Kernel modules: cx8800
04:01.2 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video
and Audio Decoder [MPEG Port] [14f1:8802] (rev 05)
Subsystem: TERRATEC Electronic GmbH Device [153b:117a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
Kernel modules: cx8802
04:01.4 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video
and Audio Decoder [IR Port] [14f1:8804] (rev 05)
Subsystem: TERRATEC Electronic GmbH Device [153b:117a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 5
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: <access denied>
--------------------------------------
# i2cdetect -l
i2c-0 smbus SMBus I801 adapter at 0400 SMBus adapter
i2c-1 i2c cx88[0] I2C adapter
# i2cdetect 1
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-1.
I will probe address range 0x03-0x77.
Continue? [Y/n]
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: -- -- -- -- -- 08 -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: UU -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --
--------------------------------------
Thanks in advance! Any help appreciated!
Julian Picht
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: [linux-dvb] Terratec Cinergy S PCI
2008-07-03 9:21 [linux-dvb] Terratec Cinergy S PCI Julian Picht
@ 2008-07-13 13:52 ` Julian Picht
0 siblings, 0 replies; 3+ messages in thread
From: Julian Picht @ 2008-07-13 13:52 UTC (permalink / raw)
To: linux-dvb
Hi List,
anyone with any information on how to start?
Any docs to look into?
Any Wiki Page?
Anyone responsible for, or with some knowledge about, the cx88 driver?
Regards,
J.Picht
Julian Picht schrieb:
> Hi List.
>
> I recently bought a Terratec Cinergy S PCI which uses a Conexant CX2388x
> chip as it's PCI Interface and a Fujitsu MB86A16 as it's frontend.
>
> I modified the cx88 files to recognize this card. Now I need a some
> pointers how to attach the MB86A16 frontend (which is included in mantis
> source, i think) to the cx88 and how to obtain the right i2c adresses etc.
>
> Is there any documentation on how to do that?
> I would be very happy to contribute to the great work you do and already
> did.
>
> --------------------------------------
> # lspci -vvnn
> 04:01.0 Multimedia video controller [0400]: Conexant CX23880/1/2/3 PCI
> Video and Audio Decoder [14f1:8800] (rev 05)
> Subsystem: TERRATEC Electronic GmbH Device [153b:117a]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 22
> Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
> Capabilities: <access denied>
> Kernel driver in use: cx8800
> Kernel modules: cx8800
>
> 04:01.2 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video
> and Audio Decoder [MPEG Port] [14f1:8802] (rev 05)
> Subsystem: TERRATEC Electronic GmbH Device [153b:117a]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (1500ns min, 22000ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
> Capabilities: <access denied>
> Kernel modules: cx8802
>
> 04:01.4 Multimedia controller [0480]: Conexant CX23880/1/2/3 PCI Video
> and Audio Decoder [IR Port] [14f1:8804] (rev 05)
> Subsystem: TERRATEC Electronic GmbH Device [153b:117a]
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr-
> Stepping- SERR- FastB2B- DisINTx-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
> <TAbort- <MAbort- >SERR- <PERR- INTx-
> Latency: 32 (1500ns min, 63750ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 5
> Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
> Capabilities: <access denied>
>
> --------------------------------------
> # i2cdetect -l
> i2c-0 smbus SMBus I801 adapter at 0400 SMBus adapter
> i2c-1 i2c cx88[0] I2C adapter
> # i2cdetect 1
> WARNING! This program can confuse your I2C bus, cause data loss and worse!
> I will probe file /dev/i2c-1.
> I will probe address range 0x03-0x77.
> Continue? [Y/n]
> 0 1 2 3 4 5 6 7 8 9 a b c d e f
> 00: -- -- -- -- -- 08 -- -- -- -- -- -- --
> 10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 50: UU -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
> 70: -- -- -- -- -- -- -- --
> --------------------------------------
>
> Thanks in advance! Any help appreciated!
>
> Julian Picht
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
>
>
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 3+ messages in thread
* [linux-dvb] Terratec Cinergy S PCI
@ 2008-12-16 20:54 Stefan Ubben
0 siblings, 0 replies; 3+ messages in thread
From: Stefan Ubben @ 2008-12-16 20:54 UTC (permalink / raw)
To: linux-dvb
[-- Attachment #1.1: Type: text/plain, Size: 398 bytes --]
Hi List,
I am searching for a kernel driver which supports the 'Terratec Cinergy S
PCI' card.
The card is based on the Conexant CX2388 Chip but it is not listed in the
CX88 hardware list.
Is there anybody working in this area ? I saw two posts from Julian Picht
regarding this issue.
Is there any progress resp. patch I could try ? If not, I would like to
start implementation ;-)
Thanks
Stefan
[-- Attachment #1.2: Type: text/html, Size: 543 bytes --]
[-- Attachment #2: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2008-12-16 20:54 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2008-07-03 9:21 [linux-dvb] Terratec Cinergy S PCI Julian Picht
2008-07-13 13:52 ` Julian Picht
-- strict thread matches above, loose matches on Subject: below --
2008-12-16 20:54 Stefan Ubben
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox