From: Antti Palosaari <crope@iki.fi>
To: tom <thomas@ickes-home.de>
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] Problems with MSI Digivox Duo DVB-T USB, Ubuntu 8.04
Date: Fri, 18 Jul 2008 21:21:41 +0300 [thread overview]
Message-ID: <4880DF35.8040505@iki.fi> (raw)
In-Reply-To: <1216403709.10841.20.camel@super-klappi>
tom wrote:
> Hello,
> since a few days I'm trying hard make this stick running. One basic problem is that I'm not able to find out which chipset is in this
> stick.
> I have tried af9015 driver and firmware, but it doesn't work.
It looks like AF9015 dual design. I think problem you have is missing
device USB-IDs. I will add those in a next few hours and you can test
then again.
> Does anybody have the same problem or even solved it?
:)
regards
Antti Palosaari
>
> dmesg | grep usb:
>
> [19614.849918] usb 3-3: USB disconnect, address 5
> [19618.108978] usb 3-3: new high speed USB device using ehci_hcd and address 6
> [19618.244872] usb 3-3: configuration #1 chosen from 1 choice
>
>
> lsusb -v :
>
> Bus 003 Device 005: ID 1462:8801 Micro Star International
> Device Descriptor:
> bLength 18
> bDescriptorType 1
> bcdUSB 2.00
> bDeviceClass 0 (Defined at Interface level)
> bDeviceSubClass 0
> bDeviceProtocol 0
> bMaxPacketSize0 64
> idVendor 0x1462 Micro Star International
> idProduct 0x8801
> bcdDevice 2.00
> iManufacturer 1 Afatech
> iProduct 2 DVB-T 2
> iSerial 0
> bNumConfigurations 1
> Configuration Descriptor:
> bLength 9
> bDescriptorType 2
> wTotalLength 46
> bNumInterfaces 1
> bConfigurationValue 1
> iConfiguration 0
> bmAttributes 0x80
> (Bus Powered)
> MaxPower 500mA
> Interface Descriptor:
> bLength 9
> bDescriptorType 4
> bInterfaceNumber 0
> bAlternateSetting 0
> bNumEndpoints 4
> bInterfaceClass 255 Vendor Specific Class
> bInterfaceSubClass 0
> bInterfaceProtocol 0
> iInterface 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x81 EP 1 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x02 EP 2 OUT
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x84 EP 4 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
> Endpoint Descriptor:
> bLength 7
> bDescriptorType 5
> bEndpointAddress 0x85 EP 5 IN
> bmAttributes 2
> Transfer Type Bulk
> Synch Type None
> Usage Type Data
> wMaxPacketSize 0x0200 1x 512 bytes
> bInterval 0
>
> Thomas
>
>
> _______________________________________________
> linux-dvb mailing list
> linux-dvb@linuxtv.org
> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
--
http://palosaari.fi
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next prev parent reply other threads:[~2008-07-18 18:21 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-18 17:55 [linux-dvb] Problems with MSI Digivox Duo DVB-T USB, Ubuntu 8.04 tom
2008-07-18 18:21 ` Antti Palosaari [this message]
2008-07-18 20:49 ` Antti Palosaari
2008-07-19 8:58 ` tom
2008-07-19 12:13 ` tom
2008-07-20 12:56 ` Antti Palosaari
2008-07-20 13:19 ` tom
2008-07-22 17:03 ` Thomas Ickes
2008-07-22 17:21 ` Antti Palosaari
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4880DF35.8040505@iki.fi \
--to=crope@iki.fi \
--cc=linux-dvb@linuxtv.org \
--cc=thomas@ickes-home.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox