From: Ian Davidson <id012c3076@blueyonder.co.uk>
To: Video 4 Linux <video4linux-list@redhat.com>
Subject: xawtv - no picture
Date: Sun, 27 Jul 2008 16:21:10 +0100 [thread overview]
Message-ID: <488C9266.7010108@blueyonder.co.uk> (raw)
I am trying to run xawtv (or actually streamer) to capture video - but
at the moment, it is not working.
For details of my system, please see
http://www.smolts.org/client/show_all/pub_86fd06ee-583b-40d2-b23b-92749309023b
I have a K-World DVB-T 210SE card which I hope will allow me to capture
the video (although that is not very evident in the above link)
Here is a section of the dmesg output
Linux video capture interface: v2.00
saa7130/34: v4l2 driver version 0.2.14 loaded
ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 18 (level, low) -> IRQ 18
saa7133[0]: found at 0000:04:02.0, rev: 209, irq: 18, latency: 64, mmio:
0xfebff800
saa7133[0]: subsystem: 17de:7253, board: UNKNOWN/GENERIC
[card=0,autodetected]
saa7133[0]: board init: gpio is 100
parport_pc 00:07: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
saa7133[0]: i2c eeprom 00: de 17 53 72 ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
ppdev: user-space parallel port driver
When I try to run xawtv, this is what I get
[Ian@localhost ~]$ xawtv
This is xawtv-3.95, running on Linux/i686 (2.6.25.10-86.fc9.i686)
xinerama 0: 1440x900+0+0
WARNING: No DGA support available for this display.
WARNING: couldn't find framebuffer base address, try manual
configuration ("v4l-conf -a <addr>")
ioctl:
VIDIOC_TRY_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=3;fmt.win.w.top=48;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=(nil);fmt.win.clipcount=0;fmt.win.bitmap=(nil)):
Invalid argument
ioctl:
VIDIOC_S_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=3;fmt.win.w.top=48;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=0x9414cb4;fmt.win.clipcount=0;fmt.win.bitmap=(nil)):
Invalid argument
ioctl: VIDIOC_OVERLAY(int=0): Invalid argument
ioctl:
VIDIOC_TRY_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=3;fmt.win.w.top=48;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=(nil);fmt.win.clipcount=0;fmt.win.bitmap=(nil)):
Invalid argument
ioctl:
VIDIOC_S_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=3;fmt.win.w.top=48;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=0x9414cb4;fmt.win.clipcount=1;fmt.win.bitmap=(nil)):
Invalid argument
ioctl: VIDIOC_OVERLAY(int=0): Invalid argument
ioctl:
VIDIOC_TRY_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=3;fmt.win.w.top=48;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=(nil);fmt.win.clipcount=0;fmt.win.bitmap=(nil)):
Invalid argument
ioctl:
VIDIOC_S_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=3;fmt.win.w.top=48;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=0x9414cb4;fmt.win.clipcount=1;fmt.win.bitmap=(nil)):
Invalid argument
ioctl: VIDIOC_OVERLAY(int=0): Invalid argument
ioctl:
VIDIOC_TRY_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=3;fmt.win.w.top=48;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=(nil);fmt.win.clipcount=0;fmt.win.bitmap=(nil)):
Invalid argument
ioctl:
VIDIOC_S_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=3;fmt.win.w.top=48;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=0x9414cb4;fmt.win.clipcount=1;fmt.win.bitmap=(nil)):
Invalid argument
ioctl: VIDIOC_OVERLAY(int=0): Invalid argument
ioctl:
VIDIOC_TRY_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=3;fmt.win.w.top=48;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=(nil);fmt.win.clipcount=0;fmt.win.bitmap=(nil)):
Invalid argument
ioctl:
VIDIOC_S_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=3;fmt.win.w.top=48;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=0x9414cb4;fmt.win.clipcount=1;fmt.win.bitmap=(nil)):
Invalid argument
ioctl: VIDIOC_OVERLAY(int=0): Invalid argument
ioctl:
VIDIOC_TRY_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=3;fmt.win.w.top=48;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=(nil);fmt.win.clipcount=0;fmt.win.bitmap=(nil)):
Invalid argument
ioctl:
VIDIOC_S_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=3;fmt.win.w.top=48;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=0x9414cb4;fmt.win.clipcount=0;fmt.win.bitmap=(nil)):
Invalid argument
ioctl: VIDIOC_OVERLAY(int=0): Invalid argument
ioctl:
VIDIOC_TRY_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=3;fmt.win.w.top=48;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=(nil);fmt.win.clipcount=0;fmt.win.bitmap=(nil)):
Invalid argument
ioctl:
VIDIOC_S_FMT(type=VIDEO_OVERLAY;fmt.win.w.left=3;fmt.win.w.top=48;fmt.win.w.width=384;fmt.win.w.height=288;fmt.win.field=ANY;fmt.win.chromakey=0;fmt.win.clips=0x9414cb4;fmt.win.clipcount=1;fmt.win.bitmap=(nil)):
Invalid argument
ioctl: VIDIOC_OVERLAY(int=0): Invalid argument
[Ian@localhost ~]$
Also, the screen is black, although the camera was turned on.
I feel that it is trying to tell me something - but I do not understand
what it is saying. Is there any hope?
Ian
--
Ian Davidson
239 Streetsbrook Road, Solihull, West Midlands, B91 1HE
--
Facts used in this message may or may not reflect an underlying objective reality.
Facts are supplied for personal use only.
Recipients quoting supplied information do so at their own risk.
Facts supplied may vary in whole or part from widely accepted standards.
While painstakingly researched, facts may or may not be indicative of actually occurring events or natural phenomena.
The author accepts no responsibility for personal loss or injury resulting from memorisation and subsequent use.
--
video4linux-list mailing list
Unsubscribe mailto:video4linux-list-request@redhat.com?subject=unsubscribe
https://www.redhat.com/mailman/listinfo/video4linux-list
next reply other threads:[~2008-07-27 15:21 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-27 15:21 Ian Davidson [this message]
2008-07-29 20:42 ` xawtv - no picture hermann pitton
2008-07-30 19:07 ` Ian Davidson
2008-07-30 22:44 ` hermann pitton
2008-07-30 23:08 ` hermann pitton
[not found] ` <48921FF9.8040504@blueyonder.co.uk>
[not found] ` <1217542190.3272.106.camel@pc10.localdom.local>
[not found] ` <48942E42.5040207@blueyonder.co.uk>
[not found] ` <1217679767.3304.30.camel@pc10.localdom.local>
[not found] ` <4895D741.1020906@blueyonder.co.uk>
2008-08-03 21:28 ` hermann pitton
2008-08-05 21:12 ` KWorld DVB-T 210SE - Capture only in Black/White Ian Davidson
2008-08-06 20:35 ` Ian Davidson
2008-08-06 21:53 ` hermann pitton
2008-08-07 21:50 ` Ian Davidson
2008-08-07 23:55 ` hermann pitton
2008-08-08 19:02 ` Ian Davidson
2008-08-08 21:21 ` hermann pitton
2008-08-09 10:54 ` Ian Davidson
2008-08-11 17:04 ` hermann pitton
[not found] ` <48A8892F.1010900@blueyonder.co.uk>
2008-08-18 1:57 ` hermann pitton
2008-08-26 18:35 ` Ian Davidson
2008-08-26 23:15 ` hermann pitton
2008-09-01 2:35 ` hermann pitton
2008-09-05 19:23 ` Ian Davidson
2008-09-06 1:20 ` hermann pitton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=488C9266.7010108@blueyonder.co.uk \
--to=id012c3076@blueyonder.co.uk \
--cc=Ian.Davidson@bigfoot.com \
--cc=video4linux-list@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox