From: Marko Ristola <marko.ristola@kolumbus.fi>
To: Leif Oberste-Berghaus <leif@oberste-berghaus.de>
Cc: linux-dvb@linuxtv.org
Subject: Re: [linux-dvb] TerraTec Cinergy C DVB-C / Twinhan AD-CP400 (VP-2040) & mantis driver
Date: Sun, 27 Jul 2008 20:20:35 +0300 [thread overview]
Message-ID: <488CAE63.9070204@kolumbus.fi> (raw)
In-Reply-To: <D5C41D41-A72D-4603-9AD1-67A8C5E73289@oberste-berghaus.de>
[-- Attachment #1: Type: text/plain, Size: 1614 bytes --]
Hi,
Unfortunately I have been busy.
The patch you tried was against jusst.de Mantis Mercurial branch head.
Your version of mantis_dma.c is not the latest version and thus the
patch didn't
apply cleanly.
Here is the version that I use currently. It doesn't compile straight
against jusst.de/mantis head.
It might work for you because MANTIS_GPIF_RDWRN is not renamed as
MANTIS_GPIF_HIFRDWRN.
If it doesn't compile please rename MANTIS_GPIF_RDWRN occurrences into
MANTIS_GPIF_HIFRDWRN on that file.
Otherwise the file should work as it is.
Best regards,
Marko Ristola
Leif Oberste-Berghaus kirjoitti:
> Hi Marko,
>
> I tried to patch the driver but I'm getting an error message:
>
> root@mediapc:/usr/local/src/test/mantis-0b04be0c088a# patch -p1 <
> mantis_dma.c.aligned_dma_trs.patch
> patching file linux/drivers/media/dvb/mantis/mantis_dma.c
> patch: **** malformed patch at line 22: int mantis_dma_exit(struct
> mantis_pci *mantis)
>
> Any ideas?
>
> Regards
> Leif
>
>
> Am 14.07.2008 um 22:05 schrieb Marko Ristola:
>
>> Hi Leif,
>>
>> Here is a patch that implements the mentioned DMA transfer improvements.
>> I hope that these contain also the needed fix for you.
>> You can apply it into jusst.de/mantis Mercurial branch.
>> It modifies linux/drivers/media/dvb/mantis/mantis_dma.c only.
>> I have compiled the patch against 2.6.25.9-76.fc9.x86_64.
>>
>> cd mantis
>> patch -p1 < mantis_dma.c.aligned_dma_trs.patch
>>
>> Please tell us whether my patch helps you or not: if it helps, some
>> of my patch might get into jusst.de as
>> a fix for your problem.
>>
>> Best Regards,
>> Marko
>
>
[-- Attachment #2: mantis_dma.c --]
[-- Type: text/x-csrc, Size: 7274 bytes --]
/*
Mantis PCI bridge driver
Copyright (C) 2005, 2006 Manu Abraham (abraham.manu@gmail.com)
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <asm/page.h>
#include <linux/vmalloc.h>
#include "mantis_common.h"
#define RISC_WRITE (0x01 << 28)
#define RISC_JUMP (0x07 << 28)
#define RISC_SYNC (0x08 << 28)
#define RISC_IRQ (0x01 << 24)
#define RISC_STATUS(status) ((((~status) & 0x0f) << 20) | ((status & 0x0f) << 16))
#define RISC_FLUSH() mantis->risc_pos = 0
#define RISC_INSTR(opcode) mantis->risc_cpu[mantis->risc_pos++] = cpu_to_le32(opcode)
/* (16 * 188) = 3008. (16 * 204) = 3264. x % 64 == 0, x <= 4095 */
#define RISC_DMA_TR_UNIT(m) (((m->hwconfig->ts_size == MANTIS_TS_204)? 204:188) * 16)
#define DMA_TRANSFERS_PER_BLOCK (9)
#define MANTIS_BLOCK_BYTES(m) (RISC_DMA_TR_UNIT(m) * DMA_TRANSFERS_PER_BLOCK)
#define MANTIS_BLOCK_COUNT (4)
#define MANTIS_RISC_SIZE PAGE_SIZE
#define MANTIS_DMA_BUFSZ(m) (m->line_bytes * m->line_count)
int mantis_dma_exit(struct mantis_pci *mantis)
{
if (mantis->buf_cpu) {
dprintk(verbose, MANTIS_ERROR, 1,
"DMA=0x%lx cpu=0x%p size=%d",
(unsigned long) mantis->buf_dma,
mantis->buf_cpu,
MANTIS_DMA_BUFSZ(mantis));
pci_free_consistent(mantis->pdev,
MANTIS_DMA_BUFSZ(mantis),
mantis->buf_cpu, mantis->buf_dma);
mantis->buf_cpu = NULL;
}
if (mantis->risc_cpu) {
dprintk(verbose, MANTIS_ERROR, 1,
"RISC=0x%lx cpu=0x%p size=%lx",
(unsigned long) mantis->risc_dma,
mantis->risc_cpu,
MANTIS_RISC_SIZE);
pci_free_consistent(mantis->pdev, MANTIS_RISC_SIZE,
mantis->risc_cpu, mantis->risc_dma);
mantis->risc_cpu = NULL;
}
return 0;
}
static inline int mantis_alloc_buffers(struct mantis_pci *mantis)
{
if (!mantis->buf_cpu) {
mantis->buf_cpu = pci_alloc_consistent(mantis->pdev,
MANTIS_DMA_BUFSZ(mantis),
&mantis->buf_dma);
if (!mantis->buf_cpu) {
dprintk(verbose, MANTIS_ERROR, 1,
"DMA buffer allocation failed");
goto err;
}
dprintk(verbose, MANTIS_ERROR, 1,
"DMA=0x%lx cpu=0x%p size=%d",
(unsigned long) mantis->buf_dma,
mantis->buf_cpu,
MANTIS_DMA_BUFSZ(mantis));
}
if (!mantis->risc_cpu) {
mantis->risc_cpu = pci_alloc_consistent(mantis->pdev,
MANTIS_RISC_SIZE,
&mantis->risc_dma);
if (!mantis->risc_cpu) {
dprintk(verbose, MANTIS_ERROR, 1,
"RISC program allocation failed");
mantis_dma_exit(mantis);
goto err;
}
dprintk(verbose, MANTIS_ERROR, 1,
"RISC=0x%lx cpu=0x%p size=%lx",
(unsigned long) mantis->risc_dma,
mantis->risc_cpu, MANTIS_RISC_SIZE);
}
return 0;
err:
dprintk(verbose, MANTIS_ERROR, 1, "Out of memory (?) .....");
return -ENOMEM;
}
static inline int mantis_calc_lines(struct mantis_pci *mantis)
{
mantis->line_bytes = MANTIS_BLOCK_BYTES(mantis);
mantis->line_count = MANTIS_BLOCK_COUNT;
dprintk(verbose, MANTIS_DEBUG, 1,
"Mantis RISC line bytes=[%d], line count=[%d]",
mantis->line_bytes, mantis->line_count);
return 0;
}
int mantis_dma_init(struct mantis_pci *mantis)
{
int err = 0;
dprintk(verbose, MANTIS_DEBUG, 1, "Mantis DMA init");
if ((err = mantis_calc_lines(mantis)) < 0) {
dprintk(verbose, MANTIS_ERROR, 1, "Mantis calc lines failed");
goto err;
}
if (mantis_alloc_buffers(mantis) < 0) {
dprintk(verbose, MANTIS_ERROR, 1, "Error allocating DMA buffer");
// Stop RISC Engine
// mmwrite(mmread(MANTIS_DMA_CTL) & ~MANTIS_RISC_EN, MANTIS_DMA_CTL);
mmwrite(0, MANTIS_DMA_CTL);
goto err;
}
return 0;
err:
return err;
}
static inline void mantis_risc_program(struct mantis_pci *mantis)
{
u32 buf_pos = 0;
u32 line;
u32 step_bytes;
step_bytes = RISC_DMA_TR_UNIT(mantis);
dprintk(verbose, MANTIS_DEBUG, 1, "Mantis create RISC program");
RISC_FLUSH();
dprintk(verbose, MANTIS_DEBUG, 1, "risc len lines %u, bytes per line %u",
mantis->line_count, mantis->line_bytes);
for (line = 0; line < mantis->line_count; line++) {
int risc_step;
for (risc_step = 0; risc_step < DMA_TRANSFERS_PER_BLOCK; risc_step++) {
dprintk(verbose, MANTIS_DEBUG, 1, "RISC PROG line=[%x] risc_step=[%x], step_bytes=[%x], buf_pos=[%x]", line, risc_step, step_bytes, buf_pos);
/* First step: informs that the previous line has been completed (round robin). */
RISC_INSTR(RISC_WRITE |
((risc_step == 1)? (RISC_IRQ | RISC_STATUS(line)) : 0) |
step_bytes);
RISC_INSTR(mantis->buf_dma + buf_pos);
buf_pos += step_bytes;
}
}
RISC_INSTR(RISC_JUMP);
RISC_INSTR(mantis->risc_dma);
dprintk(verbose, MANTIS_DEBUG, 1, "Final RISC PROG size=[%x/%x]", (u32)mantis->risc_pos, (u32)MANTIS_RISC_SIZE);
}
void mantis_dma_start(struct mantis_pci *mantis)
{
dprintk(verbose, MANTIS_DEBUG, 1, "Mantis Start DMA engine");
memset(mantis->buf_cpu, 0, MANTIS_DMA_BUFSZ(mantis));
mantis->last_block = mantis->finished_block = 0;
mantis_risc_program(mantis);
mmwrite(mantis->risc_dma, MANTIS_RISC_START);
mmwrite(mmread(MANTIS_GPIF_ADDR) | MANTIS_GPIF_RDWRN, MANTIS_GPIF_ADDR);
mmwrite(0, MANTIS_DMA_CTL);
mmwrite(mmread(MANTIS_INT_MASK) | MANTIS_INT_RISCI, MANTIS_INT_MASK);
mmwrite(MANTIS_FIFO_EN | MANTIS_DCAP_EN
| MANTIS_RISC_EN, MANTIS_DMA_CTL);
}
void mantis_dma_stop(struct mantis_pci *mantis)
{
u32 stat = 0, mask = 0;
stat = mmread(MANTIS_INT_STAT);
mask = mmread(MANTIS_INT_MASK);
dprintk(verbose, MANTIS_DEBUG, 1, "Mantis Stop DMA engine");
mmwrite((mmread(MANTIS_GPIF_ADDR) & (~(MANTIS_GPIF_RDWRN))), MANTIS_GPIF_ADDR);
mmwrite((mmread(MANTIS_DMA_CTL) & ~(MANTIS_FIFO_EN |
MANTIS_DCAP_EN |
MANTIS_RISC_EN)), MANTIS_DMA_CTL);
mmwrite(mmread(MANTIS_INT_STAT), MANTIS_INT_STAT);
mmwrite(mmread(MANTIS_INT_MASK) & ~(MANTIS_INT_RISCI |
MANTIS_INT_RISCEN), MANTIS_INT_MASK);
tasklet_kill(&mantis->tasklet);
}
void mantis_dma_xfer(unsigned long data)
{
struct mantis_pci *mantis = (struct mantis_pci *) data;
while (mantis->last_block != mantis->finished_block) {
dprintk(verbose, MANTIS_DEBUG, 1, "last block=[%d] finished block=[%d]",
mantis->last_block, mantis->finished_block);
(mantis->hwconfig->ts_size == MANTIS_TS_204 ? dvb_dmx_swfilter_204: dvb_dmx_swfilter)
(&mantis->demux, &mantis->buf_cpu[mantis->last_block * mantis->line_bytes], mantis->line_bytes);
mantis->last_block = (mantis->last_block + 1) % mantis->line_count;
}
}
// suspend to standby, ram or disk.
int mantis_dma_suspend(struct mantis_pci *mantis, pm_message_t mesg, int has_dma)
{
if (has_dma)
mantis_dma_stop(mantis);
return 0;
}
// resumes into state D0 always.
void mantis_dma_resume(struct mantis_pci *mantis, pm_message_t prevMesg, int has_dma)
{
if (has_dma)
mantis_dma_start(mantis);
}
[-- Attachment #3: Type: text/plain, Size: 150 bytes --]
_______________________________________________
linux-dvb mailing list
linux-dvb@linuxtv.org
http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
next prev parent reply other threads:[~2008-07-27 17:20 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-07-10 20:42 [linux-dvb] TerraTec Cinergy C DVB-C / Twinhan AD-CP400 (VP-2040) & mantis driver Leif Oberste-Berghaus
2008-07-13 12:50 ` Marko Ristola
2008-07-13 20:49 ` Leif Oberste-Berghaus
2008-07-14 20:05 ` Marko Ristola
[not found] ` <D5C41D41-A72D-4603-9AD1-67A8C5E73289@oberste-berghaus.de>
2008-07-27 17:20 ` Marko Ristola [this message]
2008-07-29 12:30 ` Mika Båtsman
2008-08-04 20:29 ` Marko Ristola
2008-08-05 8:41 ` Mika Båtsman
2008-08-05 17:41 ` Marko Ristola
2008-08-06 6:52 ` Mika Båtsman
2008-08-06 19:54 ` Marko Ristola
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=488CAE63.9070204@kolumbus.fi \
--to=marko.ristola@kolumbus.fi \
--cc=leif@oberste-berghaus.de \
--cc=linux-dvb@linuxtv.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox